I have written a for loop code and I want to write in more succinct way without using a for loop, but instead use matrix conditional.
I am teaching myself matlab and I would appreciate any feedback.
I want to create a new matrix, the first column is y, and the second column is filled with zero except for the y's whose indices are contained in the indices matrix. And in the latter case, add 1 instead of 0.
Thanks.
y=[1;2;3;4;5;6;7];
indices=[1;3;5];
[m,n]=size(y);
tem=zeros(m,1);
data=[y,tem];
[r,c]=size(indices);
for i=1:r
a=indices(i);
data(a,2 )=1;
end
Output:
data =
1 1
2 0
3 1
4 0
5 1
6 0
7 0
A shorter alternative:
data = [y(:), full(sparse(indices, 1, 1, numel(y), 1))];
The resulting matrix data is composed of two column vectors: y(:) and a sparse array, with "1"s at the positions corresponding to indices.
Using proper initialization and sparse matrices can be really useful in MATLAB.
How about
data = zeros( m, 2 );
data(:,1) = y;
data( indices, 2 ) = 1;
Related
Very new to Matlab, I usually use STATA.
I want to use the nchoosek fuction to get the sum of vectors in one matrix.
I have a 21x21 adjacency matrix, with either 0 or 1 as the inputs. I want to create a new matrix, that will give me a sum of inputs between all possible triads from the adjacency matrix.
The new matrix should look have four variables, indexes (i, j, k) - corresponding to each combination from the 21x21. And a final variable which is a sum of the inputs.
The code I have so far is:
C = nchoosek(21,3)
B = zeros(nchoosek(21,3), 4)
for i=1:C
for j=i+1:C
for k=j+1:C
B(?)=B(i, j, k, A(i)+A(j)+A(k)) #A is the 21x21 adj mat
end
end
end
I know my assignment statement is incorrect as I don't completed understand the indexing role of the ":" operator. Any help will be appreciated.
Thanks!
This might be what you want:
clear all
close all
clc
A = rand(21,21); % Replace this with actual A
rowNum = 0;
for i=1:21
for j=i+1:21
for k=j+1:21
rowNum = rowNum+1;
B(rowNum,:) = [i, j, k, sum(A(:,i)+A(:,j)+A(:,k))];
end
end
end
There are some points:
You loop for different combinations. the total number of combination is nchoosek(21,3) which you can check after 3 nested loop. Your code with for i=1:C was the first error since you're actually looping for different values of i and different values of j and k. So these just 21 values not more.
To avoid repeated combinations, it's enough to start new index after the previous one, which you've realized in your code.
There are other possible approaches such as vectorized format, but to stick to your approach, I used a counter: rowNum which is the loop counter and updated along the loop.
B(rowNum,:) means all element of rowNum'th row of the matrix B.
Below is an algorithm to find the triads in an adjacency matrix. It checks all possible triads and sums the values.
%basic adjacency matrix with two triads (1-2-5) (2-3-5)
A=[];
A(1,:) = [0 1 0 0 1];
A(2,:) = [1 0 1 0 1];
A(3,:) = [0 1 0 0 1];
A(4,:) = [0 0 0 0 1];
A(5,:) = [1 1 1 1 0];
A=A==1; %logical matrix
triads=nchoosek(1:5,3);
S=nan(size(triads,1),4);
for ct = 1:size(triads,1)
S(ct,1:3)=[A(triads(ct,1),triads(ct,2)),A(triads(ct,1),triads(ct,3)),A(triads(ct,2),triads(ct,3))];
S(ct,4)=sum(S(ct,1:3));
end
triads(find(S(:,4)==3),:)
ans =
1 2 5
2 3 5
I have a situation analogous to the following
z = magic(3) % Data matrix
y = [1 2 2]' % Column indices
So,
z =
8 1 6
3 5 7
4 9 2
y represents the column index I want for each row. It's saying I should take row 1 column 1, row 2 column 2, and row 3 column 2. The correct output is therefore 8 5 9.
I worked out I can get the correct output with the following
x = 1:3;
for i = 1:3
result(i) = z(x(i),y(i));
end
However, is it possible to do this without looping?
Two other possible ways I can suggest is to use sub2ind to find the linear indices that you can use to sample the matrix directly:
z = magic(3);
y = [1 2 2];
ind = sub2ind(size(z), 1:size(z,1), y);
result = z(ind);
We get:
>> result
result =
8 5 9
Another way is to use sparse to create a sparse matrix which you can turn into a logical matrix and then sample from the matrix with this logical matrix.
s = sparse(1:size(z,1), y, 1, size(z,1), size(z,2)) == 1; % Turn into logical
result = z(s);
We also get:
>> result
result =
8
5
9
Be advised that this only works provided that each row index linearly increases from 1 up to the end of the rows. This conveniently allows you to read the elements in the right order taking advantage of the column-major readout that MATLAB is based on. Also note that the output is also a column vector as opposed to a row vector.
The link posted by Adriaan is a great read for the next steps in accessing elements in a vectorized way: Linear indexing, logical indexing, and all that.
there are many ways to do this, one interesting way is to directly work out the indexes you want:
v = 0:size(y,2)-1; %generates a number from 0 to the size of your y vector -1
ind = y+v*size(z,2); %generates the indices you are looking for in each row
zinv = z';
zinv(ind)
>> ans =
8 5 9
I have two matrices.
mcaps which is a double 1698 x 2
index_g which is a logical 1698 x 2
When using the line of code below I get the error message that Index exceeds matrix dimensions. I don't see how this is the case though?
tsp = nansum(mcaps(index_g==1, :));
Update
Sorry I should have mentioned that I need the sum of each column in the mcaps vector
** Example of data **
mcaps index_g
5 6 0 0
4 3 0 0
6 5 1 1
4 6 0 1
8 7 0 0
There are two problems here. I missed one. Original answer is below.
What I missed is that when you use the logical index in this way, you are picking out elements of the matrix that may have different numbers of elements in each column, so MATLAB can't return a well formed matrix back to nansum, and so returns a vector. To get around this, use the fact that 0 + anything = 0
% create a mask of values you don't want to sum. Note that since
% index_g is already logical, you don't have to test equal to 1.
mask = ~index_g & isnan(mcaps)
% create a temporary variable
mcaps_to_sum = mcaps;
% change all of the values that you don't want to sum to zero
mcaps_to_sum(mask) = 0;
% do the sum
sum(mcaps_to_sum,1);
This is basically all that the nansum function does internally, is to set all of the NaN values to zero and then call the sum function.
index_g == 1 returns a 1698 x 2 logical matrix, but then you add in an extra dimension with the colon. To sum the columns, use the optional dim input. You want:
tsp = nansum(mcaps(index_g == 1),1);
Hi I have the following matrix:
A= 1 2 3;
0 4 0;
1 0 9
I want matrix A to be:
A= 1 2 3;
1 4 9
PS - semicolon represents the end of each column and new column starts.
How can I do that in Matlab 2014a? Any help?
Thanks
The problem you run into with your problem statement is the fact that you don't know the shape of the "squeezed" matrix ahead of time - and in particular, you cannot know whether the number of nonzero elements is a multiple of either the rows or columns of the original matrix.
As was pointed out, there is a simple function, nonzeros, that returns the nonzero elements of the input, ordered by columns. In your case,
A = [1 2 3;
0 4 0;
1 0 9];
B = nonzeros(A)
produces
1
1
2
4
3
9
What you wanted was
1 2 3
1 4 9
which happens to be what you get when you "squeeze out" the zeros by column. This would be obtained (when the number of zeros in each column is the same) with
reshape(B, 2, 3);
I think it would be better to assume that the number of elements may not be the same in each column - then you need to create a sparse array. That is actually very easy:
S = sparse(A);
The resulting object S is a sparse array - that is, it contains only the non-zero elements. It is very efficient (both for storage and computation) when lots of elements are zero: once more than 1/3 of the elements are nonzero it quickly becomes slower / bigger. But it has the advantage of maintaining the shape of your matrix regardless of the distribution of zeros.
A more robust solution would have to check the number of nonzero elements in each column and decide what the shape of the final matrix will be:
cc = sum(A~=0);
will count the number of nonzero elements in each column of the matrix.
nmin = min(cc);
nmax = max(cc);
finds the smallest and largest number of nonzero elements in any column
[i j s] = find(A); % the i, j coordinates and value of nonzero elements of A
nc = size(A, 2); % number of columns
B = zeros(nmax, nc);
for k = 1:nc
B(1:cc(k), k) = s(j == k);
end
Now B has all the nonzero elements: for columns with fewer nonzero elements, there will be zero padding at the end. Finally you can decide if / how much you want to trim your matrix B - if you want to have no zeros at all, you will need to trim some values from the longer columns. For example:
B = B(1:nmin, :);
Simple solution:
A = [1 2 3;0 4 0;1 0 9]
A =
1 2 3
0 4 0
1 0 9
A(A==0) = [];
A =
1 1 2 4 3 9
reshape(A,2,3)
ans =
1 2 3
1 4 9
It's very simple though and might be slow. Do you need to perform this operation on very large/many matrices?
From your question it's not clear what you want (how to arrange the non-zero values, specially if the number of zeros in each column is not the same). Maybe this:
A = reshape(nonzeros(A),[],size(A,2));
Matlab's logical indexing is extremely powerful. The best way to do this is create a logical array:
>> lZeros = A==0
then use this logical array to index into A and delete these zeros
>> A(lZeros) = []
Finally, reshape the array to your desired size using the built in reshape command
>> A = reshape(A, 2, 3)
Suppose now I have two vectors of same length:
A = [1 2 2 1];
B = [2 1 2 2];
I would like to create a matrix C whose dim=m*n, m=max(A), n=max(B).
C = zeros(m,n);
for i = 1:length(A)
u = A(i);
v = B(i);
C(u,v)=C(u,v)+1;
end
and get
C =[0 2;
1 1]
More precisely, we treat the according indices in A and B as rows and columns in C, and C(u,v) is the number of elements in {k | A(i)=u and B(i)=v, i = 1,2,...,length(A)}
Is there a faster way to do that?
Yes. Use sparse. It assembles (i.e., sums up) the matrix values for repeating row-column pairs for you. You need an additional vector with the values that will be assembled into the matrix entries. If you use ones(size(A)), you will have exactly what you need - counting of repeated row-column pairs
spA=sparse(A, B, ones(size(A)));
full(spA)
ans =
0 2
1 1
The same can be obtained by simply passing scalar 1 to sparse function instead of a vector of values.
For matrices that have a large number of zero entries this is absolutely crucial that you use sparse storage. Another function you could use is accumarray. It can essentially do the same thing, but also works on dense matrix structure:
AA=accumarray([A;B]', 1);
AA =
0 2
1 1
You can pass size argument to accumarray if you want to create a matrix of specific size
AA=accumarray([A;B]', 1, [2 3]);
AA =
0 2 0
1 1 0
Note that you can actually also make it produce sparse matrices, and use a different operator in assembly (i.e., not necessarily a sum)
AA=accumarray([A;B]', 1, [2 3], #sum, 0, true)
will produce a sparse matrix (last parameter set to true) using sum for assembly and 0 as a fill value, i.e. a value which is used in cases a given row-column pair does not exist in A/B.