i'm having troubles trying to get IPN work inside my sandbox.
I have a developer paypal account and i imported 2 sandbox account. Now i suppose to have 2 ways to test IPN:
IPN Simulator
Setting my IPN address in sandbox options
but i have problems in both of them.
If try to use the IPN simulator everytime i try to send an IPN page starts loading for some minutes and then Chrome gives me a "empty page response" response. After some googling it appers IPN simulator have some problem with non standard ports but my page can run only on port 12000. My page is reachable, i checked from inside and outside my network, it works for all except the ipn simulator.
I have no more luck trying to set IPN address on sandbox, simply because i have no settings at all to access. I logged to sandbox and got a page where i'm supposed to login with my sandbox account, but i get a different login from mine on the upper right corner of the page (thats the original sandbox account, now that sandbox and main account are merged all this mess happen) and when i try to login with sandbox account i get a generic
This sandbox mail is not available. Try another mail address
If i try to create a new sandbox account i always get this error:
We're sorry but something went wrong.Please delete this account and
try again.
So.. i'm basically stuck. What i can do to test my ipn now?
edit for be more clear:
i used to have a sandbox and a main paypal account, now they are merged
i login to both sandbox and developer section with my main account now
even if logging in sandbox with my main account i get logged as my old sandbox account
after this first sandbox login if i try to log my sandbox account (listed in developer.paypal.com) i get that "Sandbox mail not available" error
in developer.paypal.com i can't create any new sandbox account, getting error everytime. I found that you got that error if password is not 8-20 chars long and now i'm using a correct lenght password but i'm still getting that error
edit2: i successfully created a new sandbox account!
to get that i had to:
use an US account (i was using italian)
use password with: uppercase, lowercase, special characters, numbers
initial balance import < 1000 usd
but i still can't login this account inside the sandbox, always same error. I'm hating this.
Non-standard ports really are not supported at this time, so you'll run into a myriad of different issues over time. The initial IPN delivery may work, but the re-sending of a single message may not, etcetera.
Can you use something like http://progrium.com/localtunnel/ perhaps?
With regards to the account creation:
For discussion's sake, let's stick to the right terminology; you use a developer account to log into https://developer.paypal.com/, and a Sandbox account to log into https://www.sandbox.paypal.com/
Is the account you're trying to log into via www.sandbox.paypal.com a Sandbox account listed under Applications > Sandbox accounts?
Related
I am trying to log into a PayPal sandbox account for testing purposes. But, I am continually met with the same error:
"We're sorry, something went wrong during sandbox account linking. Please try again."
Here are the steps to replicate the issue (happens in FireFox and Chrome).
Login to developer.paypal.com using live PayPal account credentials.
Navigate to Dashboard>>Sandbox Accounts
Click Create Account button.
Create account using any variety of options, e.g. personal, business account. New account is created.
Tick the checkbox next to new account listing.
Click link "Click here and provide credentials of your sandbox account."
Fill in login form using sandbox account credentials.
Click agree to terms button.
Redirected back to Sandbox Account page with "We're sorry" error.
This happens over and over with newly created accounts and existing sandbox accounts. I've tried changing passwords and settings for the accounts. I know a few years ago Chrome had a hard time juggling different cookies and sessions when logging in and out of sandbox accounts. So, I've also tried using multiple different browsers. Nothing seems to alleviate the issue.
Also, I thought maybe this issue was a temporary PayPal sandbox glitch, but I've been experiencing it for over a week.
Okay, I spoke with PayPal's technical support. It turns out that they are having some internal issues with the sandbox at the moment. If anyone else is having an issue with logging into one of their sandbox test accounts do the following:
Go back to the Sandbox Test Accounts page where it list all your test accounts.
Click on the email address of any sandbox account. There will be a drop down of "Profile" & "Notification".
Click on Profile and you shall see an iframe with a few tabs. You would be able to see the change password, change password.
Use this url to login to your sandbox account. https://www.sandbox.paypal.com/home
The key here is step 4. Don't click on the provided link labeled "Click here and provide credentials of your sandbox account." Copy and past the above URL into your browser instead.
When you are re-directed to the PayPal page to login, what URL is shown in the address bar ?
If it's "www.paypal.com" then you need to use your production account credentials.
If it's "www.sandbox.paypal.com" then you need to use your sandbox account credentials.
I'm trying to create Sandbox accounts and many times it says there are issue creating my account, other times it creates but it is unverified... (both cloning the 2 pre-created accounts or creating brand new ones).
Am I doing anything wrong? I need them verified to avoid limits and stuff... and obviously, I won't go through a verification process for a test account.
Any help?
You answered your own question.
You need a paypal account, with your real paypal account you log into the developers sandbox. There you can create test apps and users
It's not your fault, I also noticed the sandbox environment / developer dashboard / account creation process are full of errors.
Some hints:
Don't create test account using the developer dashboard, create directly from www.sandbox.paypal.com and add it to dashboard by clicking the link in "Want to link existing Sandbox Account with your developer account? Click Here and provide credentials of your sandbox account"
As it's a sandbox account, it won't send email to your real email address, instead, after you did Step 1, you can click on the sandbox test account list in developer dashboard, and access the "notifications". Which list the "emails" paypal sent. Be warned most of the emails are garbage as they are based64 encoded HTML, decoding them shows incomplete HTML code. You may try to setup your paypal account so that notification are sent in plain text, not HTML. You will need these email to get your account verified.
Even if your account has no money, try to send some and it should automatically create some for you.
I have been searching for a solution for this really hard but I can't find any answers as to where the problem is really coming from have been setting up paypal sandbox account for testing but it doesn't work have been clearing my cache many times but still it returns me this error:
This Sandbox email address is not available. Please enter another email address.
I make sure the account I use is already set on sandbox and it's a personal account, please I need more help as to know where this problem is coming from, don't know what to do on this one anymore. also even deleting previous paypal sandbox account doesn't even work!
Here's one possibility. I was running into that same error just a couple of days ago and realized what it was.
I have 2 separate PayPal accounts that are setup with developer.paypal.com. They each have 3 or 4 sandbox accounts created within them.
I had just recently been to developer.paypal.com and logged in with one of my PayPal accounts, so that session was active in my browser. Then I was trying to complete a sandbox checkout using one of the sandbox accounts associated with my other PayPal account, and that's when I was getting that error that the email address was not available.
I went back to developer.paypal.com and logged out of the account I had signed in there, and then specifically logged in with the other account that was associated with the sandbox account I was trying to use. Once I did that the error went away and I was able to use the sandbox as expected.
Hope all that made sense. Just a shot in the dark as it's the only time I've seen this error myself.
I have a website that I'm trying to hook paypal up to with a php script. php builds the query string and then submits to https://www.paypal.com/cgi-bin/webscr with the query string attached. I can verify that this works fine. I haven't processed a payment but it directs to PayPal with the correct quantities and prices, etc.
However when I change to https://www.sandbox.paypal.com/cgi-bin/webscr I get an error when I try to process that says there was a problem with the merchants PayPal account.
I have created several test accounts on PayPal sandbox but from what I can tell looking around it seems I need another merchant account in the sandbox? If so, I don't see how to do this. I'm guessing I need to change the "?business=mycode" portion of the query string but I don't know how to figure out what to change it to...
Anyway I looked around a while and can't find the answer, can anyone help or direct me to another post that answers this (I looked but couldn't find it, or at least didn't understand it if I did)?
When changing back from live to sandbox, all you should need to change if using a non hosted button is the URL to reflect the environment that you are trying to test with and the value of the business variable. This can be set to either your email address of the actual test or live seller account or the merchant id. If you have not already created an account for testing. You can do so by going to PayPal's Developer Site, and creating a developer account. Then once you have done this, you can log into the developer account and go to the Applications tab. Once on this page, click the link for sandbox accounts on the left, and create a preconfigured test seller account. This will generate an email address linked to a test account. This will be the email address that you will need to use. If this doesn't work, can you provide the string that you are submitting over to PayPal or the button code that you are using and I will take a look at it.
There is error in API key for sandbox testing in Paypal... It is due to corrupt key generation which is not properly decoded on sandbox server when you send a purchase request.
I tried using following sandbox public credentials and it works fine for me
username: sdk-three_api1.sdk.com
password: QFZCWN5HZM8VBG7Q
key: A-IzJhZZjhg29XQ2qnhapuwxIDzyAZQ92FRP5dqBzVesOkzbdUONzmOU
however I tried several times using the sandbox merchant account that i have created myself.... but was unable to ACK success.
I'm having problems on sandbox.paypal.com login with my test accounts since they've changed the interface.
I was forced to create a new account on developer.paypal.com (which is now a beta) and import my old test accounts. I've done that but none of the accounts work anymore!
I cannot login the sandbox with my merchant account and purchases aren't working.
Anyone has the same problem?
Once you validate and log in using your PayPal credentials, you can import your individual sandbox profiles. Prior to logging in to a specific sandbox account, you will have to clear your browser cache and cookies. I was having the same issue with both Chrome and Firefox. After clearing cache/cookies, I was able to log into to a sandbox profile without any issues.
If you do not clear C&C, you will receive the following error:
"This Sandbox email address is not available. Please enter another email address."
Thanks,