Is there any way to customize the map annotation bubbles in Appcelerator Titanium? Specifically, I'd like them to be able to display more text than what they show (ideally, by expanding to fit the text). I know I can make them clickable and take the user to a page with more info, but I simply don't have enough information to warrant that. It's basically just the title text is too long (and I can't change the text itself, it comes from sources I have no control over).
Alternatively (if customizing what's there isn't an option), is there an easy way to do custom bubbles? I don't really want to have to reinvent the wheel and rewrite the pins themselves and their event handlers, but if it comes down to it (and someone can point me to some code that can get me started, since I know if it's required, someone's done it), then so be it.
iPhone-specific options are fine.
At this moment the latest Titanium SDK gives you such possibilities for annotation bubble customization:
Add subtitle for the bubble (subtitle option). You will see additional text under the title. On Android subtitle can be multiline (using '\n').
Add left and right view to the bubble (leftView\rightView options). You can add custom view to the left or right part of the bubble. And view can consist of different elements (label, image...).
Read more here.
If this is enough for your task - you can use it. But for deeper customization you must create your own view and show it on annotation click event.
I need a functionality like in the iphone pdf reader.
i want that user select some text content and that content should be highlighted with yellow color.
Currently i am using text view and want to know that can i achieve same functionality in it.
or i have to shift to pdf ?
Please tell that how to achieve that in either of the two.
You can try NSAttributedString-Additions-for-HTML
Take a look at EGOTextView
A drop-in replacement for UITextView that amongst other things supports attributed strings. This would allow you to achieve your aim of selecting text, and then applying a style to that selection such as a yellow highlight.
We are trying to write a training manual application for the iPhone. On the top half of the screen is a diagram of a car engine, on the bottom half is some text. At the user repeatedly hits a "next" button, we highlight different parts of the engine, and in concert we highlight different parts of the descriptive text below.
We basically want "living text" in the text half, with the illustration following along on top to where the reader is in the text. What we'd like from the text is 1. user can scroll it using their thumb so possibly a UIScrollView 2. the software can explicitly drive a scroll to any part of the text (when they hit the "next" button). 3. the words in the text are interspersed with hotlinks e.g. "this is the camshaft... this is the piston..." and the user should be able to click on any of the keywords like camshaft, piston, and have the diagram highlight that. (The problem is not highlighting the diagram, its capturing the click). The text would have 300~400 buttons/links/keywords and about 600 words of text.
Since this is fairly similar to using a web browser, we tried using Apple's version of webkit using a UIWebView and handleOpenURL to register a service back to the app itself. But Webkit for internal links a popup comes up asking permission to access that link. Every single the user wants to go to a link (in our case just an internal event that we'd intercept so that we can highlight e.g. the camshaft). Tried to intercept the event from the HTML view, but that didn't work.
It seems like the best we can do is to abandon scrolling text, and make the text part more like flash cards or a power point presentation, breaking the text into custom UIViewCells with buttons inside a UIScrollView. However, this would impose an annoying constraint on the author that they would have to write everything to fit in the UIViewCells, sort of chunky.
Any ideas would be appreciated.
This is definitely something you can use a UIWebView for. Don't use handleOpenURL, rather, set your viewController as the webview's delegate, and override -webView:shouldStartLoadWithRequest:navigationType:. When this gets called, check the request, and pull out your link data from there.
It would probably be easier to implement that completely in JavaScript in the document you load in a UIWebView. You would have to use JavaScript (i.e. [UIWebView stringbyevaluatingjavascriptfromstring:]) anyway to achieve things like scrolling to a certain position.
I'm developing an application for the iPhone where some text is shown in a UITextView. I want to search for a specific word in the text and then show the text with that specific word colored. If anyone can help me solve this, I'll be very glad.
UITextView does not allow any formatting of the text within it. If the text is static (i.e. doesn't need to be edited), use a UIWebView instead; that will allow you to apply HTML formatting.
If a web view isn't an option, your best bet will be to try to calculate where the text in question will fall in the text view and then draw some sort of highlight around it. NSString has some methods to calculate how much space you need to draw a given string on screen; by being very, very clever with those methods, you may be able to work out where the word you're trying to highlight is. Unfortunately, this will not be at all simple.
If you do come up with a solution, everyone here would probably love to hear about it!
Does anyone have any examples or resources where i might find information on scrolling text which is too long to display in a button control? I'm thinking something along these lines.
Display as much text will fit within the current rect with a '...' at the end to signify overflow.
Pause for say 1 second then slowly scroll the text to the right edge displaying the right part of the string.
Display as much text will fit within the current rect with a '...' at the beginning to signify overflow.
Start the whole thing over in reverse.
Is there an easy way to do this using the "core" or built in "animation" frameworks on a certain mobile device?
[edit]
Iwanted to add some more details as i think people are more focused on wether or not what i'm trying to accomplish is appropriate. The button is for the answers on a trivia game. It does not perform any speciffic UI function but is for displaying the answer. Apple themselves is doing this in their iQuiz trivia game on the iPod Nano and i think its a pretty elegant solution to answers that are longer than the width of my button.
In case its the '...' that is the difficult part of this. Lets say i removed this requirement. Could i have the label for the button be full sized but clipped to the client rect of the button and use some animation methods to scroll it within the clipping rect? This would give me almost the same effect minus the ellipses.
Here's an idea: instead of ellipses (...), use a gradient on each side, so the extra text fades away into the background color. Then you could do this with three CALayers: one for the text and two for fade effect.
The fade masks would just be rectangles with a gradient that goes from transparent to the background color. They should be positioned above the text layer. The text would be drawn on the text layer, and then you just animate it sliding back and forth in the manner you describe. You can create a CGPath object describing the path and add it to a CAKeyframeAnimation object which you add to the text layer.
As for whether you think this is "easy" depends on how well you know Core Animation, but I think once you learn the API you'll find this isn't too bad and would be worth the trouble.
Without wishing to be obtuse, maybe you should rethink your problem. A button should have a clear and predictable function. It's not a place to store and display text. Perhaps you could have a description show on screen with a nice standard button below?
Update with source code example:
Here is some ready to use source code example (actually a full zipped Xcode project with image and nib files and some source code), not for the iPhone, not using Core Animation, just using a couple of simple NSImages and a NSImageView. It is just a cheap hack, it does not implement the full functionality you requested (sorry, but I don't feel like writing your source code for you :-P), horrible code layout (hey, I just hacked this together within a couple of minutes, so you can't expect any better ;-)) and it's just a demonstration how this can be done. It can be done with Core Animation, too, but this approach is simpler. Composing the button animation into a NSImageView is not as nice as subclassing a NSView and directly paint to its context, but it's much simpler (I just wanted to hack together the simplest solution possible). It will also not scroll back once it scrolled all the way to the right. Therefor you just need another method to scroll back and start another NSTimer that fires 2 seconds after you drew the dots to the left.
Just open the project in Xcode and hit run, that's all there is to do. Then have a look at the source code. It's really not that complicated (however, you may have to reformat it first, the layout sucks).
Update because of comment to my answer:
If you don't use Apple UI elements at all, I fail to see the problem. In that case your button is not even a button, it's just a clickable View (NSView if you use Cocoa). You can just sub-class NSView as MyAnswerView and overwrite the paint method to paint into the view whatever you wish. Multiline text, scrolling text, 3D text animated, it's completely up to your imagination.
Here's an example, showing how someone subclassed NSView to create a complete custom control that does not exist by default. The control looks like this:
See the funny thing in the upper left corner? That is a control. Here's how it works:
I hate to say that, as it is no answer to your question, but "Don't do that!". Apple has guidelines how to implement a user interface. While you are free to ignore them, Apple users are used to have UIs following these guidelines and not following them will create applications that Apple users find ugly and little appealing.
Here are Apple's Human Interface Guidelines
Let me quote from there
Push Button Contents and Labeling
A push button always contains text, it
does not contain an image. If you need
to display an icon or other image on a
button, use instead a bevel button,
described in “Bevel Buttons.”
The label on a push button should be a
verb or verb phrase that describes the
action it performs—Save, Close, Print,
Delete, Change Password, and so on. If
a push button acts on a single
setting, label the button as
specifically as possible; “Choose
Picture…,” for example, is more
helpful than “Choose…” Because buttons
initiate an immediate action, it
shouldn’t be necessary to use “now”
(Scan Now, for example) in the label.
Push button labels should have
title-style capitalization, as
described in “Capitalization of
Interface Element Labels and Text.” If
the push button immediately opens
another window, dialog, or application
to perform its action, you can use an
ellipsis in the label. For example,
Mail preferences displays a push
button that includes an ellipsis
because it opens .Mac system
preferences, as shown in Figure 15-8.
Buttons should contain a single verb or a verb phrase, not answers to trivia game! If you have between 2 and 5 answers, you should use Radio Buttons to have the user select the answer and an OK button to have the user accept the answer. For more than 5 answers, you should consider a Pop-up Selector instead according to guidelines, though I guess that would be rather ugly in this case.
You could consider using a table with just one column, one row per answer and each cell being multiline if the answer is very long and needs to break. So the user selects a table row by clicking on it, which highlights the table cell and then clicks on an OK button to finish. Alternatively, you can directly continue, as soon as the user selects any table cell (but that way you take the user any chance to correct an accidental click). On the other hand, tables with multiline cells are rather rare on MacOS X. The iPhone uses some, but usually with very little text (at most two lines).
Pretty sure you can't do that using the standard API, certainly not with UILineBreakMode. In addition, the style guide says that an ellipsis indicates that the button when pressed will ask you for more information -for example Open File... will ask for the name of a file. Your proposed use of ellipsis violates this guideline.
You'd need some custom logic to implement the behaviour you describe, but I don't think it's the way to go anyway.
This is not a very good UI practice, but if you still want to do it, your best bet is to do so via a clickable div styled to look like a button.
Set the width of the div to an explicit value, and its overflow to hidden, then use a script executing on an interval to adjust the scrollLeft property of this div.