I have tried continuously to install fltk into cygwin with no luck. I have been successful to install it to msys but i cant use msys in netbeans and i personally prefer cygwin.
-->After i have extracted the FLTK 1.3.2 tar file
-->I ran this in cygwin in the fltk directory (c:/fltk/)
sh configure --prefix=/usr/local/fltk --enable-localjpeg --enable-localzlib --enable-localpng
--> When i run make after the previous input, I get this:
Archiving ../lib/libfltk_jpeg.a...
process_begin: CreateProcess(NULL, /cygdrive/c/MinGW/bin/ar cr ../lib/libfltk_jpeg.a jaricom.o jcapimin.o jcapistd.o jcarith.o jccoefct.o jccolor.o jcdctmgr.o jchuff.o jcinit.o jcmainct.o jcmarker.o jcmaster.o jcomapi.o jcparam.o jcprepct.o jcsample.o jctrans.o jdapimin.o jdapistd.o jdarith.o jdatadst.o jdatasrc.o jdcoefct.o jdcolor.o jddctmgr.o jdhuff.o jdinput.o jdmainct.o jdmarker.o jdmaster.o jdmerge.o jdpostct.o jdsample.o jdtrans.o jerror.o jfdctflt.o jfdctfst.o jfdctint.o jidctflt.o jidctfst.o jidctint.o jmemmgr.o jmemnobs.o jquant1.o jquant2.o jutils.o, ...) failed.
make (e=2): The system cannot find the file specified.
make[1]: *** [../lib/libfltk_jpeg.a] Error 2
make: *** [all] Error 1
Cygwin already has FLTK. Use the Cygwin installer, find the package, and install it.
Related
I'm a totally fresh man in bioinformatics and this is my first time to ask for help in english language web. When I tried to install 'BioPerl' in my MacBookPro BigSur 11.5.2, something strange happened.
Firstly, when doing cpan install BioPerl, it failed and told to me that
one dependency not OK (Graph::Directed); additionally test harness failed
Secondly, I tried to install Graph::Directed, and ...
Result: FAIL
Failed 63/84 test programs. 11/740 subtests failed.
make: *** [test_dynamic] Error 255
ETJ/Graph-0.9724.tar.gz
one dependency not OK (Set::Object); additionally test harness failed
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports ETJ/Graph-0.9724.tar.gz
Thirdly, I installed Set::Object, this failed again...
cc -c -g -pipe -fno-strict-aliasing -fstack-protector-strong -DPERL_USE_SAFE_PUTENV -Os -DVERSION=\"1.41\" -DXS_VERSION=\"1.41\" -iwithsysroot "/System/Library/Perl/5.30/darwin-thread-multi-2level/CORE" Object.c
Object.xs:5:10: fatal error: 'EXTERN.h' file not found
#include "EXTERN.h"
^~~~~~~~~~
1 error generated.
make: *** [Object.o] Error 1
RURBAN/Set-Object-1.41.tar.gz
/usr/bin/make -- NOT OK
After that, I find some answers ("Fatal error: 'EXTERN.h' file not found" while installing Perl modules1) but not work, my perl is 5.30.2 (result of 'perl -v' in terminal) while '/Library/Developer/CommandLineTools/SDKs' just including 'MacOSX10.14.sdk' and 'MacOSX10.15.sdk' (no 'MacOSX11sdk') and when I use
find /Library/Developer/CommandLineTools -name EXTERN.h
/Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/Library/Perl/5.18/darwin-thread-multi-2level/CORE/EXTERN.h
/Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/System/Library/Perl/5.28/darwin-thread-multi-2level/CORE/EXTERN.h
/Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/System/Library/Perl/5.18/darwin-thread-multi-2level/CORE/EXTERN.h
Versions in my Mac maybe in chaos? so I have no idea to solve this question now. That is very upsetting to a new man but I will never give up...
After the failure of all the above, I look for perl 5.30.2 file, and it is in "usr/perl" and "sys/lib", compared with which i "find"(sys/lib/developer/), the "CORE" file is empty and cannot be edited (I want to copy the absent file from 5.28 but failed and does not work). That is the results to those errors. While, I cannot fix it...
I tried to install postgresql 9.5(alpha) Ubuntu, but after make world I got this error:
In file included from ../../../../src/include/postgres.h:47:0,
from varlena.c:15:
levenshtein.c: In function ‘varstr_levenshtein’:
../../../../src/include/c.h:726:7: error: static assertion failed: "Levenshtein hinting mechanism restricts NAMEDATALEN"
do { _Static_assert(condition, errmessage); } while(0)
levenshtein.c:104:2: note: in expansion of macro ‘StaticAssertStmt’
StaticAssertStmt(NAMEDATALEN <= MAX_LEVENSHTEIN_STRLEN,
levenshtein.c: In function ‘varstr_levenshtein_less_equal’:
../../../../src/include/c.h:726:7: error: static assertion failed: "Levenshtein hinting mechanism restricts NAMEDATALEN"
do { _Static_assert(condition, errmessage); } while(0)
levenshtein.c:104:2: note: in expansion of macro ‘StaticAssertStmt’
StaticAssertStmt(NAMEDATALEN <= MAX_LEVENSHTEIN_STRLEN,
make[4]: *** [varlena.o] Error 1
make[3]: *** [adt-recursive] Error 2
make[2]: *** [utils-recursive] Error 2
make[1]: *** [all-backend-recurse] Error 2
make: *** [world-src-recurse] Error 2
Does anybody have a suggestion?
In ubuntu you can install latest on this moment postgresql 9.5alpha2 from my ppa by this series of command from terminal:
sudo apt-add repository ppa:kazan417/postgresql
sudo apt-get update
sudo apt-get install postgresql-9.5 postgresql-contrib-9.5 postgresql-client-9.5
This commands not just install postgresql also it setup evrything you need for running postgresql.
Also you can install additional packages. or if you want harder way compile it from source by "dpkg-buildpackage" - this is better ubuntu way of compiling. And then installing by dpkg -i .
Here link you can find more info like dsc file and orig.tar.gz for compiling.
I am attempting to install VMware workstation 10.0.1 on a new installation of CEntOS version 7 (kernel version 3.10.0).
I have copied the vmnet.tar file from /lib/vmware/modules/source to my home directory for debugging. The building of the vmnet module fails with the following error message:
/bin/make -j12 auto-build HEADER_DIR=/lib/modules/3.10.0-123.el7.x86_64/build/include CC=/bin/gcc IS_GCC_3=no
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.10.0-123.el7.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.10.0-123.el7.x86_64'
CC [M] /home/******/junk/vmnet-only/filter.o
/home/******/junk/vmnet-only/filter.c:206:1: error: conflicting types for ‘VNetFilterHookFn’
VNetFilterHookFn (unsigned int hooknum, // IN:
^
/home/******/junk/vmnet-only/filter.c:64:18: note: previous declaration of ‘VNetFilterHookFn’ was here
static nf_hookfn VNetFilterHookFn;
^
/home/******/junk/vmnet-only/filter.c:64:18: warning: ‘VNetFilterHookFn’ used but never defined [enabled by default]
/home/******/junk/vmnet-only/filter.c:206:1: warning: ‘VNetFilterHookFn’ defined but not used [-Wunused-function]
VNetFilterHookFn (unsigned int hooknum, // IN:
^
make[2]: *** [/home/******/junk/vmnet-only/filter.o] Error 1
make[1]: *** [_module_/home/******/junk/vmnet-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/3.10.0-123.el7.x86_64'
make: *** [vmnet.ko] Error 2
I've googled a bit, but I didn't find anything specific to WS 10.0.1, although I did find some patches for the installation of WS 10.0.3 but it appears that these patches would be ineffective for WS 10.0.1. I believe this because the macro that they are modifying in the patch (KERNEL_VERSION) is no in the offending file, filter.c.
Anyone have a link to a solution to this problem.
Thanks!
I had a similar problem. Found this solution and worked:
cd /usr/lib/vmware/modules/source
tar -xvf vmnet.tar
cd vmnet-only
vi filter.c
Go to lines 206 and 259 and replace the string
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 13, 0)
By
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 0, 0)
Then:
cd ..
tar -uvf vmnet.tar vmnet-only
rm -rf vmnet-only
Then run vmware workstation again and it should be able to install the kernel modules.
Good luck!
user3910091 has the right answer. This also works on 10.0.3 on RHEL7. The strange thing is that it appears they patched this in 10.0.3, but their patch uses >= and the filter options are in the opposite order, but the same minor kernel version changes appear to fix it.
cd /usr/lib/vmware/modules/source
tar -xvf vmnet.tar
cd vmnet-only
vi filter.c
Go to around lines 206 and 259 and replace the string
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 13, 0)
By
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 0, 0)
Then:
cd ..
tar -uvf vmnet.tar vmnet-only
rm -rf vmnet-only
Then run /usr/bin/vmware again and it should be able to install the kernel modules.
I am trying to compile PJSIP on Ubuntu according to this document:
http://supportforums.blackberry.com/t5/Native-Development/Porting-PJSIP-PJMEDIA-and-PJLIB-to-BlackBerry-10/ta-p/2085751
When I am executing this command: ./buildpjsip (it's on number 8 in document), it is showing these errors:
cp: cannot create regular file /x86/lib': No such file or directory
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build/trunk /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
checking build system type... i686-pc-linux-gnu
checking host system type... i486-pc-nto-qnx8.0.0
checking target system type... i486-pc-nto-qnx8.0.0
checking for i486-pc-nto-qnx8.0.0-gcc... no
checking for gcc... gcc
checking whether the C compiler works... no
aconfigure: error: in `/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build/trunk':
aconfigure: error: C compiler cannot create executables
See `config.log' for more details
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
adding: libopencore-amrwb.a (deflated 67%) adding: libopencore-amrnb.a (deflated 70%)
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts*
I also encountered the issue before and solved it successfully. I think what results in the issue is that, after you executed the step 4 in the document: Execute bbndk-env.bat or bbndk-env.sh from the root of your installation of the Native SDK. You shouldn't close the command prompt or open a new terminal. I mean you should execute the rest steps in the same terminal, then you will build the library successfully. Also, you had better ensure your gcc is the newest version. Good luck for you.
You could try first:
$ cd bb10-pjsipdemo/pjbuildscripts/pjsip-checkout/trunk
$ ./configure
$ touch pjlib/include/pj/config_site.h
$ make dep
$ make
Reference: http://www.pjsip.org/pjlib/docs/html/pjlib_build_sys_pg.htm
And then run bb10-pjsipdemo/pjbuildscripts/buildpjsip
I'm trying to setup nodejs to access a postgres database. What I've done so far is the following (https://gist.github.com/579814):
echo 'export PATH=$HOME/local/bin:$PATH' >> ~/.bashrc
. ~/.bashrc
mkdir ~/local
mkdir ~/node-latest-install
cd ~/node-latest-install
curl http://nodejs.org/dist/node-latest.tar.gz | tar xz --strip-components=1
./configure --prefix=~/local
make install # ok, fine, this step probably takes more than 30 seconds...
curl http://npmjs.org/install.sh | sh
then
git clone git://github.com/isaacs/npm.git
make
make install
so far, so good. However, when I try to install the postgres driver
npm install pg
I get the following:
node-waf configure build || true
Checking for program g++ or c++ : /usr/bin/g++
Checking for program cpp : /usr/bin/cpp
Checking for program ar : /usr/bin/ar
Checking for program ranlib : /usr/bin/ranlib
Checking for g++ : ok
Checking for node path : not found
Checking for node prefix : ok /usr/local
Checking for program pg_config : /usr/bin/pg_config
'configure' finished successfully (0.066s)
Waf: Entering directory `/home/christian/node_modules/pg/build'
[1/2] cxx: src/binding.cc -> build/default/src/binding_1.o
../src/binding.cc:3:25: fatal error: node_events.h: No such file or directory
compilation terminated.
Waf: Leaving directory `/home/christian/node_modules/pg/build'
Build failed: -> task failed (err #1):
{task: cxx binding.cc -> binding_1.o}
I've been looking around for setting the node path, although haven't found anything of help so far - probably also because I'm totally new to nodejs, so I'd be happy about any hint.
Now, you have NodeJS installed in your Ubuntu. You should set /etc/environment and load nodeJS path that can be executed by another users. For example:
NODE="/home/ubuntu/local/node"
NODE_PATH="/usr/local/lib/node_modules"
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:$NODE/bin:$NODE/lib/node_modules"
#PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
Do this in bash:
echo 'export NODE_PATH=~/local/:~/local/node_modules' >> ~/.bashrc
before things are fixed you must use node 0.5.1 (you can use gitk to revert the tree to this version)
Auteur: Ryan Dahl <ry#tinyclouds.org> 2011-07-19 10:46:38
Auteur du commit: Ryan Dahl <ry#tinyclouds.org> 2011-07-19 10:46:38
Parent: 0a3fc1d9c8becc32c63ae736ca2b3719a3d03c5b (Remove StatWatcher's dep on C++ EventEmitter)
Enfant: 061ce7b0ac370c8a5ae93d95ab7da171cbd488f0 (net_uv: Fix simple/test-http-expect-continue.js)
Branche: master, remotes/origin/master
Suit: v0.5.1
Précède: v0.5.2
Finally remove node::EventEmitter
I had the same problem.
The issue was that I was specifying a old version of PG in my package.js
After I removed the old version dependancy I was able to install PG without issue.