I installed SugarCRM CE faststack on Windows, installed successfully. I installed it on my laptop. The ip is 127.0.0.1:8080/sugarcrm.
I can access it perfectly from my own laptop.
When I try to login from another computer it gives me an error.
Any idea why this is happening, or How can I make it so that I can have access to SugarCRM on any computer?
Thanks
You need to use the IP address of the computer you installed it on. 127.0.0.1 is a localhost, meaning you can only access that computer. The ip address you installed Sugar on should be 192.168.xx.xx or something like that.
Related
so i setup a centOS vm in VMware workstation, installed qradar..everything ran fine. I call this vm as QR1.
I was able to use qradar console on QR1 from my host machine, the internet works perfectly fine in QR1.
I make a full clone of QR1 called it QR2.
I boot it up and only running QR2 vm (QR1 is closed) but there is no internet on this vm. Even though all the network setting are same as QR1 and QR1 works just fine(i double checked).
QR2 has same adapter, same ip, same gateway and dns as of QR1 but it doesnt work...
previously i was thinking that i cannot have them both running at same time but QR2 just doesnt connect.
I am also not able to ping QR2 from my host and other way around.
What could be causing this ?
According to this vmware link reference, try these steps:
To change the MAC address of the Linux operating system:
Connect to vCenter Server using the vSphere Client Right-click the
virtual machine and click Edit Settings. Click Network adapter and
note the MAC Address.
For example, you see a MAC Address similar to:
xx:xx:xx:xx:xx:xx
1.Power on the Linux virtual machine.
2.Open a console and log in as root.
3.Change directory to etc/sysconfig/network-scripts.
4.Edit ifcfg-eth0 using a plain text editor and update the MAC address to reflect the MAC address in Step 3.
I am trying to connect to a remote system which has CentOS running on it from a Windows machine. I am getting the following error:
My remote computer is on and is available on the network. I tried following the steps mentioned on this website http://www.techotopia.com/index.php/Remote_Access_to_the_CentOS_6_Desktop to enable remote access on centos as well.
Currently I can access the remote sever through commandline utility like Putty only.
I use VNC for remote GUI admin work on CentOS device's from windows its nice and easy to set up and use, below are links to CentOS 6.5 set up guide and 7
https://www.howtoforge.com/vnc-server-installation-centos-6.5
https://www.howtoforge.com/vnc-server-installation-on-centos-7
Let me know how you get on :)
As posted by PaulM, I followed the steps in the website to install VNCServer on the centos machine.
To connect from my linux machine, I wrote the following commands:
vncviewer
IPAddress:5901
Adding the port number specifically made it work
CentOs to centOs Only
No Need Any Softwares Already Centos have TigerVnc Viewer
1.Enable Remote desktop in your centos system
Goto System-->Preference-->Remote Desktop
**i.Enable allow other user to view your Desktop**
**ii.Enable allow other user to control your Desktop**
**iii.You must confirm each access to this machine allow or cancel**
**iv.if you ask any password to enable and type your password**
Notification Area:
Some one connect your system its enable to shows the icon on top panel.
I installed VirtualBox on Windows 7, and created a virtual machine, where I installed CentOS 7. Then in CentOS 7 I installed CollabNet Subversion Edge, following this information as a guide and
performed all the steps provided there, but I can not access the server.
The installation should be performed on a desktop machine and the server I'm trying to access from a notebook, which is connected to the same network as the desktop machine. Also obviously, as the network has a proxy to surf, I had to configure it, and doing well because I can surf the internet and others. It's using 'Bridged Adapter' networking in the VM settings.
Can you think of any idea why I do not have access? Any help is welcome.
I found a response similar to what I'm looking for, but do not quite understand what it says. I'm only in CentOS7 enp0s3 interface, and there is collabnet running, not running on another interface.
NEWS:Gain access the server using its IP (172.x.x.x:3343/svn or 172.x.x.x:18080/svn), but not by name. Maybe there is a problem in the computer name, applies only to Windows, and CentOS running on the virtual machine, use another computer name. Can it be? If so, you know how to identify such equipment?
Looks like a firewall issue. Try to run following commands:
firewall-cmd --permanent --zone=public --add-port=<dst_port>/tcp
firewall-cmd --reload
Hope this helps
I'm trying to do some local RDC testing using VirtualBox. The host is OSX.8, the VM is ubuntu, and VirtualBox is version 4.1.22.
The VM starts fine without any problems. I shut it down and choose "Enable Server" from the Remote Display section of the Display options and start again, and again it starts fine. Note that the port is left default and the authentication is "null".
I start Microsoft's RDC (v2.1.0) and type in 'localhost' and get: You were disconnected from the Windows-based computer because of network problems.
I try 127.0.0.1 and get the same error. Then I type in the IP of my (host) computer and get the same error. I know the loopback address avoids the firewall but I turned it off anyway and got the same error.
I get the same error whether I'm using NAT networking or bridged. What am I doing wrong?
I should note that this is a vanilla install of VirtualBox and I haven't added any extensions or guest additions or anything like that.
Seems I'm doing everything right. What am I missing? Thanks for the help!
Problem Solved! You have to install the "VirtualBox 4.1.22 Oracle VM VirtualBox Extension Pack" (available on the VB download page) to make RDC work. I wish it would tell you this when you click "enable server" but I guess that's asking too much. I hope this helps someone else.
I run Windows 7 as my main OS, and for development work I installed CentOS on a virtual machine under VirtualBox. Everything is installed, including httpd and php with mysql, but I can't figure out what IP to use to gain access to the server.
For example, I used to have XAMPP installed on 7 and I just used "localhost" to get to the servers document root, but I have no clue what it is for the virtual machine.
I have tried "locahost", "192.168.11.2" (my address on the network) and my own IP address and I can't seem to get it working.
Any help would be appreciated. Thank you. :)
I don't know VirtualBox, but can you do an ifconfig from the terminal window to your VM. If it doesn't give you a terminal window, your CentOS setup probably does DHCP to get an address. Browse to the web interface of your home router (192.168.11.1?) and check the DHCP clients table to see if it registered and get its address.