I had a working kepler eclipse on Ubuntu 13.04, x86_64.
Subversion svn, version 1.7.8.
I had several projects in my workspace.
The actual storage was set up on disk as:
top:
ProjA
ProjB
ProjC
where the different projects where checked out of the subversion repository separately, even though "top" was in the repository, as was top/ProjA, top/ProjB, etc.
I then moved the whole mess to a backup directory and checked out the repository fresh so that each of the project directories were proper subversion subdirectories under top, which is now checked out as a proper subversion directory.
I then copied in the .metadata, .settings, and .project files & directories into the new structure and started eclipse. I get the following message:
SVN: '0x00000000: Open Project' operation finished with error: 0x00000000: Unable connect to 'perl' project.
Please check that SVN meta-information exists and its format is supported by the current SVN plug-in version.
If so, it is possible that project working copy is relocated outside plug-in control.
At the current moment project will be automatically disconnected from source control.
0x00000000: Unable connect to 'perl' project.
Please check that SVN meta-information exists and its format is supported by the current SVN plug-in version.
If so, it is possible that project working copy is relocated outside plug-in control.
At the current moment project will be automatically disconnected from source control.
Which is expected, because the old directory structure had the svn info in each of the project directories, and now it's located higher up in the tree.
However, when I try to reconnect the project (right-click project, Team->Share Project) to the repository, the Share Project Wizard correctly finds the repository path, selects Simple Mode to connect to the correct URL, but I get the message:
Share Project
The Project "perl" already exists in repository and has some content.
To connect the local project to the specified location, the repository
folder content should be checked out. Please consider that applying
local changes can cause resource conflicts..."
Do you wish to proceed?
I click "Yes", and get:
Share project was failed.
svn: E200030: CANTOPEN
Any idea on how to proceed?
Configuration:
Team SVN Connector: SVNKit 1.7.9
Subversion svn, version 1.7.8.
I have this kind of problem. In my case, it seems projects are disconnected if there are some latency to access the file (eg network).
After some investigations, the subversive plugin is no more a production tool, and is no more supported....
Related
So, here in the company we work with svn, and our svn server only have the source folder. When I use NetBeans, it's everything ok because I can add source folders in project and will work fine in svn. But on eclipse if i do the checkout from command line and add that folder in my dynamic web project, I can't see the svn history and nothing, svnclipse just does not work on that folder.
Our structure of the projects it's something like this
Workspace
Project folder
Project1
Project configuration files
SourceCode
Packages
Project folder 2
Project2
SourceCode
I already try to make checkout using svnclipse, but he add alot of extra config files, he turns the folder in a project and the source folder is add as a link to another project, in this scenario the svnclipse quick diff does not work properly.
There is a way to use that folder as source and Svnclipse works on that ?
Sorry if my English is not so good
There is no easy way to do what you want. In Eclipse a source control provider can only be connected to the project itself. So options are:
Use another svn client like command line or TortoiseSVN.
Create a small SVN project with the Eclipse project configuration files that also use svn:externals to pull in your source folder from repository.
With option 2, you would checkout this small SVN project from some other repository using Subclipse in Eclipse, could even be a local file:// repository and then the svn:externals property would also cause your source folder to be checked out.
I have accidentally deleted .svn directory from my maven project. Now when I started eclipse the projected shows no connections to svn repository. I am not able to assign the svn url to the project.
How can I assign the repository url to the maven project in eclipse to be able to synchronize.
First: make a backup. (zip the current folder)
Then: within eclipse you should be able to simply share the project (again) and select the SVN repository. Eclipse usually syncs the sources and the repository. Usually nothing gets lost in the process but better be safe and make a backup.
For maven no action should be required. There is the scm section in the pom.xml but that probably did not change. As long as no plugin reads the SVN revision number or you do a release locally maven will be fine.
I'm developing a Symfony applicatoin and I'm trying to set up a Git workflow on Eclipse. The workspace (where the project files lies) are located on /home/sfprojects/testing/ and the Git repository is located on /var/git/testing.
Reading over and over all the Git resources I've could found (including "Pro Git" by Scott Chacón, and the EGit user guide (http://wiki.eclipse.org/EGit/User_Guide, among others), it's easy to understand why the Git repository and the Eclipse workspace should not share the same directory, now my big confusion is that I can not see a method to keep both things separated from each other.
Once I've created the Git repository through the wizard, all the project files are moved automatically from the Eclipse workspace to the working directory on /var/git/testing/testing/. For my big surprise, the new created Git repository became into the new project workplace on Eclipse with .git directory in the parent directory. It is not a obvious contradiction?. If I let the mouse pointer over the option "Use or create repository in parent folder of project" a very clear help tag with the following text:
When checked, this wizard will try to find or create a repository in the parent folder hierarchy of the selected projects.
Typically, newly created projects are located in the Eclipse workspace, thus repositories created this way would also end up in the Eclipse workspace.
This is not recommended for several reasons explained in the EGit user guide.
So, after some research, my logical conclusion is to create a Git bare repository and then link it to the project located in the workspace... wrong! bare repositories are not available to a Eclipse project.
I need a serious explanation on this.
Seems that I went wrong about what I thought was a contradiction in the EGit User Guide and the EGit behaviour about moving the project directory to the Git repository.
When the project files are moved as a working directory of the Git repository (with a Git metadata folder at the same level), they're still under the Eclipse control, as Eclipse workspace. But as EGit User Guide says (http://wiki.eclipse.org/EGit/User_Guide#Eclipse_Workspace_and_Repository_working_directory), the .git metadata folder should NOT be into the workspace... well that's when I was wrong, cause it is a Eclipse project/Git working folder... but it IS NOT an Eclipse workspace by any means, so the Git metadata folder is not editable, as any other source project file, just for Git (and the EGit Eclipse plugin, of course).
I just opened my eclipse and was presented with following error:
SVN: '0x00000000: Open Project' operation finished with error: 0x00000000: Unable connect to 'my_project' project.
Please check that SVN meta-information exists and its format is supported by the current SVN plug-in version.
If so, it is possible that project working copy is relocated outside plug-in control.
At the current moment project will be automatically disconnected from source control.
0x00000000: Unable connect to 'my_project' project.
Please check that SVN meta-information exists and its format is supported by the current SVN plug-in version.
If so, it is possible that project working copy is relocated outside plug-in control.
At the current moment project will be automatically disconnected from source control.
I wanted to reconnect the project to SVN and I searched web and found the possible solution is to:
right click on project - > team -> share project
And follow the prompts:
I had 2 options cvs ? svn ? -> I selected svn and clicked next.
select the repository location (use existing repository location). I selected one n clicked next.
However, in the 2 step, it says on the top:
The wizard will help you to share your files with the SVN respository for the first time. Your project will automatically be imported into the SVN repository.
Has anyone tried this to reconnect to SVN repository? I am afraid that is does not starts checking in the project into the location and overwrite the code in repository.
I would only go with the sharing project option if someone is certain that this will not overwrite or check in anything into the repository but only reconnect it.
I tried the same thing. On step 2, it should say:
Project is already configured with SVN repository information.
It will not overwrite or check in anything in this case. Just reconnects.
Your case seems different since it says sharing for the first time. I think it may overwrite.
I had the same issue when I upgraded Eclipse to Juno.
I used Tortoise to upgrade my working copy to SVN 1.7 and then used "Share Project..." in Eclipse and it worked for all my projects.
I have an eclipse project on my hard disk, which is a fairly recent check out from an SVN repository. I've imported this project into my Eclipse workspace, and now want to associate it with the SVN repository.
How do I do this? The only options I seem to have under Right-click -> Team is "Share Project", which only seems to allow me to do an initial import.
Edit: Motivation - It's a largish repository, and I don't really want to have to import the whole thing over the network.
Edit 2: There are (for some reason) no .svn dirs in the project. So maybe a fresh import from svn is the only option
Team->Share project is exactly what you need to do. Select SVN from the list, then click "Next". Subclipse will notice the presence of .svn directories that will ask you to confirm that the information is correct, and associate the project with subclipse.
I just wanted to add that if you don't see Team -> Share project, it's likely you have to remove the project from the workspace before importing it back in. This is what happened to me, and I had to remove and readd it to the workspace for it to fix itself. (This happened when moving from dramatically different Eclipse versions + plugins using the same workspace.)
subclipse not showing "share project" option on project context menu in eclipse
I'm asked this question very frequently, if it's smart to use "Share project..." if a eclipse project has been disconnected from it SVN counterpart in the repository. So, I append my answer to this thread.
The SVN-Team option "Share project ..." is totally fine for projects that exist in SVN and in your Eclipse workspace, even if the Eclipse project is missing the hidden .svn configuration. You can still connect them. Eclipse SVN-implementation (Subclipse/Subversive) will verify if the provided SVN http(s) source is populated. If yes, all existing files will be copied and linked (checked out in SVN terms) to your very personal Eclipse workspace.
Word of caution:
Do a backup if you depend on you local files. The SVN implementation may vary its behaviour with every release.
If you have multiple projects encapsulated within each other, make sure you point the SVN path to the correct local path.
regards,
Feder
I came across the same issue. I checked out using Tortoise client and then tried to import the projects in Eclipse using import wizard. Eclipse did not recognize the svn location. I tried share option as mentioned in the above posts and it tried to commit these projects into SVN. But my issue was a version mismatch. I selected svn 1.8 version in eclipse (I was using 1.7 in eclipse and 1.8.8 in tortoise) and then re imported the projects. It resolved with no issues.
I am using Tortoise SVN client. You can alternativley check out the required project from SVN in some folder. You can see a .SVN folder inside the project. Copy the .SVN folder into the workspace folder. Now remove the project from eclipse and import the same again into eclipse. You can see now the project is now associated with svn
In case of SVN servers you have to creating a central repository with all projects. The contents of the repository can be uploaded with the Team/Share command; in case of the Subversive client it automatically runs a commit after the import, so you can upload your files.
This step cannot be circumvented in any way using a centralized version management system such as SVN.
Try this- Close the project then open it. It links with svn automatically,if project was checked out from valid svn path.