I am using PostgeSQL 9.2.2. My database schema is
pg_rocks_post
title | character varying(1024) | not null
body | text | not null
body_title_tsv | tsvector |
body_title_titleupweight_tsv | tsvector |
I created the body_title_titleupweight_tsv as a type tsvector.
I then defined a trigger using the examples in the documentation which up weighted the title as follows.
pgdj=# CREATE FUNCTION title_upweight_trigger() RETURNS trigger AS $$
begin
new.body_title_titleupweight_tsv :=
setweight(to_tsvector('pg_catalog.english', coalesce(new.title,'')), 'A') ||
setweight(to_tsvector('pg_catalog.english', coalesce(new.body,'')), 'D');
return new;
end
$$ LANGUAGE plpgsql;
I know the trigger works because when I update an entry in the pg_rocks_post and then query it : I see that it has correctly populated the body_title_titleupweight_tsv ts_vector with that updated row.
My Question is how do I have it apply the trigger to the existing rows in my table. I am only learning postgres and so have a few hundred entries in my test database and want to know how to populate the body_title_titleupweight_tsv column.
I think one way to do this would be to run an update and write the function all over with something like
pgdj=# UPDATE pg_rocks_post SET body_title_titleupweight_tsv =
setweight(to_tsvector( coalesce(title,'')),'A') ||
setweight(to_tsvector(coalesce(body,'')),'D');
Instead of re writing the logic for the trigger again in the update statement above. Is there a way to trigger the trigger above by doing a dummy update or a "touch" style operation that flips the trigger on all rows in the database.
I tried looking for syntax or examples of such dummy or "touch" type operations and could not find any that explained how to do this.
Since the table is small, just do a dummy update of the entire table:
update pg_rocks_post set title=title;
And let the trigger do its thing.
Normally triggers would run on a table on BEFORE or AFTER an insert, update or delete of a row. There are several options that allow you to decide on when to call the trigger.
Updating the row currently being inserted before insert would be a typical way to use a trigger. Then it is just a matter of creating a trigger on the actual table:
CREATE TRIGGER trig_title_upweight_trigger
BEFORE INSERT OR UPDATE
ON pg_rocks_post
FOR EACH ROW
EXECUTE PROCEDURE title_upweight_trigger();
Related
I am trying to write a trigger which gets data from the table attribute in which multiple rows are inserted corresponding to one actionId at one time and group all that data into the one object:
Table Schema
actionId
key
value
I am firing trigger on rows insertion,SO how can I handle this multiple row insertion and how can I collect all the data.
CREATE TRIGGER attribute_changes
AFTER INSERT
ON attributes
FOR EACH ROW
EXECUTE PROCEDURE log_attribute_changes();
and the function,
CREATE OR REPLACE FUNCTION wflowr222.log_task_extendedattribute_changes()
RETURNS trigger AS
$BODY$
DECLARE
_message json;
_extendedAttributes jsonb;
BEGIN
SELECT json_agg(tmp)
INTO _extendedAttributes
FROM (
-- your subquery goes here, for example:
SELECT attributes.key, attributes.value
FROM attributes
WHERE attributes.actionId=NEW.actionId
) tmp;
_message :=json_build_object('actionId',NEW.actionId,'extendedAttributes',_extendedAttributes);
INSERT INTO wflowr222.irisevents(message)
VALUES(_message );
RETURN NULL;
END;
$BODY$
LANGUAGE plpgsql VOLATILE
COST 100;
and data format is,
actionId key value
2 flag true
2 image http:test.com/image
2 status New
I tried to do it via Insert trigger, but it is firing on each row inserted.
If anyone has any idea about this?
I expect that the problem is that you're using a FOR EACH ROW trigger; what you likely want is a FOR EACH STATEMENT trigger - ie. which only fires once for your multi-line INSERT statement. See the description at https://www.postgresql.org/docs/current/sql-createtrigger.html for a more through explanation.
AFAICT, you will also need to add REFERENCING NEW TABLE AS NEW in this mode to make the NEW reference available to the trigger function. So your CREATE TRIGGER syntax would need to be:
CREATE TRIGGER attribute_changes
AFTER INSERT
ON attributes
REFERENCING NEW TABLE AS NEW
FOR EACH STATEMENT
EXECUTE PROCEDURE log_attribute_changes();
I've read elsewhere that the required REFERENCING NEW TABLE ... syntax is only supported in PostgreSQL 10 and later.
Considering the version of postgres you have, and therefore keeping in mind that you can't use a trigger defined FOR EACH STATEMENT for your purpose, the only alternative I see is
using a trigger after insert in order to collect some information about changes in a utility table
using a unix cron that execute a pl/sql that do the job on data set
For example:
Your utility table
CREATE TABLE utility (
actionid integer,
createtime timestamp
);
You can define a trigger FOR EACH ROW with a body that do something like this
INSERT INTO utilty values(NEW.actionid, curent_timestamp);
And, finally, have a crontab UNIX that execute a file or a procedure that to something like this:
SELECT a.* FROM utility u JOIN yourtable a ON a.actionid = u.actionid WHERE u.createtime < current_timestamp;
// do something here with records selected above
TRUNCATE table utility;
If you had postgres 9.5 you could have used pg_cron instead of unix cron...
i want an upsert functionality that returns the (new/existing) id of the row.
Linking to my previous question. I asked previously about RULE postgres create rule on insert do nothing if exists insert otherwise; RETURNING id but looks like it is not possible.
So I resort to a trigger
CREATE OR REPLACE FUNCTION upsert_asset() RETURNS trigger AS $trigger_bound$
BEGIN
INSERT INTO asset(symbol, name, type, status)
VALUES (NEW.symbol, NEW.name, NEW.type, NEW.status)
ON CONFLICT (symbol) DO UPDATE SET symbol = EXCLUDED.symbol;
RETURN NEW;
END;
$trigger_bound$
LANGUAGE plpgsql;
CREATE OR REPLACE TRIGGER upsert_asset_trigger
AFTER INSERT ON asset
FOR EACH ROW
EXECUTE PROCEDURE upsert_asset();
I tested the above and works. So my questions are
Is this trigger a correct way to achieve this functionality? Any race conditions/performance issues that i should know about?
How can I generalize this query, by not giving the column names? asset(symbol, name, type, status). i do not want to pay attention to this rule every time I change my table. Is it possible to say NEW.* or column.* or something? What psuedorelations are available to achieve this? Please note there are some default columns too. So how does NEW.default_column get a value incase the insert statement has left that column in the insert statement?
Thanks,
I am trying to set up triggers for insert and update events for the master table of some partition tables in PostgreSQL. Each time an insertion is made into the master table, the insert trigger event will redirect it into the correct partition table. Consequently, I will need to return NULL from this function call, since I don't want the master table to be populated as well. If the master table receives an update event, it will update a timestamp before making the change in the table. The problem is that the update trigger is never fired. I am using PostgreSQL version 9.6.
I have tried to combine the trigger functions into one, and merged the called trigger procedures into one as well, but the results are the same. The update trigger is only triggered if I return NEW from the insertion trigger function (which populates the master table), or if I comment out the insertion trigger function altogether.
DROP SCHEMA IF EXISTS test CASCADE;
CREATE SCHEMA test;
SET SCHEMA 'test';
CREATE TYPE test_type AS ENUM ('unit', 'performance');
CREATE TABLE test (
type test_type NOT NULL,
score INTEGER NOT NULL CHECK (score > 0),
id SERIAL PRIMARY KEY,
updated_at TIMESTAMP DEFAULT current_timestamp
);
CREATE TABLE performance_test (
CHECK (type = 'performance')
) INHERITS (test);
CREATE FUNCTION insert_test()
RETURNS trigger AS
$$
BEGIN
INSERT INTO performance_test VALUES (NEW.*);
RETURN NULL;
END;
$$ LANGUAGE plpgsql;
CREATE FUNCTION update_timestamp()
RETURNS trigger AS
$$
BEGIN
RAISE NOTICE 'This is never reached.';
UPDATE performance_test
SET updated_at = current_timestamp
WHERE id = NEW.id;
RETURN NULL;
END;
$$ LANGUAGE plpgsql;
CREATE TRIGGER test_insertion BEFORE INSERT ON test
FOR EACH ROW EXECUTE PROCEDURE insert_test();
CREATE TRIGGER test_update BEFORE UPDATE ON test
FOR EACH ROW EXECUTE PROCEDURE update_timestamp();
---------------------------------------------------------------------------
INSERT INTO test VALUES ('performance', 10);
SELECT * FROM performance_test;
UPDATE test SET score = 20 WHERE id = 1;
SELECT * FROM performance_test;
I am not sure if it is possible to achieve what I want with this method, so I'm reaching out here for any advice. Thanks in advance!
/ Hampus
Row triggers must be defined on individual partitions, not the partitioned table. See https://www.postgresql.org/docs/10/ddl-partitioning.html#DDL-PARTITIONING-DECLARATIVE-LIMITATIONS
I don't know why the documentation for 9.6 doesn't mention this
working update trigger:
CREATE FUNCTION update_timestamp()
RETURNS trigger AS
$$
BEGIN
NEW.updated_at = now();
RETURN NEW;
END;
$$ LANGUAGE plpgsql;
CREATE TRIGGER test_update BEFORE UPDATE ON performance_test
FOR EACH ROW EXECUTE PROCEDURE update_timestamp();
if you do UPDATE test SET score = 30, updated_at=DEFAULT; or UPDATE test SET score = 30, updated_at=current_timestamp; you might not need the update trigger.
Partitioning is not a free lunch because it has non-obvious effects on both behavior and performance, as you noticed by the trigger not behaving as you expected. If you make a mistake it can easily lead to failing queries and even bad data.
If you are really sure you need it you should make sure you understand it in detail and otherwise I'd recommend you to avoid it, most issues with slow queries can be solved by making sure the table statistics is up to date, using the right indexes, optimizing queries, changing Postgres configuration or adding more hardware.
I've created the following table:
CREATE TABLE updates
(
"table" text,
last_update timestamp without time zone
)
I want to update it whenever any table is updated, the problem is I don't know how, could someone please help me turn this pseudocode into a trigger?
this = current table on whitch operation is performed
ON ALTER,INSERT,DELETE {
IF (SELECT COUNT(*) FROM updates where table = this) = 1
THEN
UPDATE updates SET last_update = timeofday()::timestamp WHERE `table`=this
ELSE
INSERT INTO updates VALUES (this,timeofday()::timestamp);
}
You need a trigger function that is called whenever one of your tables is "updated", assuming that you mean that an INSERT, UPDATE, or DELETE is successfully executed. That trigger function would look like this:
CREATE FUNCTION log_update() RETURNS trigger AS $$
BEGIN
UPDATE updates SET last_update = now() WHERE "table" = TG_TABLE_NAME;
IF NOT FOUND THEN
INSERT INTO updates VALUES (TG_TABLE_NAME, now());
END IF;
IF (TG_OP = 'DELETE') THEN
RETURN OLD;
ELSE
RETURN NEW;
END IF;
END; $$ LANGUAGE PLPGSQL;
Every table that has to be logged this way needs to have a trigger associated with it like this:
CREATE TRIGGER ZZZ_mytable_log_updates
AFTER INSERT OR UPDATE OR DELETE ON mytable
FOR EACH ROW EXECUTE PROCEDURE log_update();
A few comments:
Trigger functions are created with PL/PgSQL; see chapter 40 in the documentation. Trigger functions come with some automatic parameters such as TG_TABLE_NAME.
Don't use reserved words ("table" in your case) as column names. Actually, in this case you are better off using the oid of the table, with the associated TG_RELID automatic parameter. It takes up less storage, it is faster, and it avoids confusion between tables with the same name in different schemas of your database. You can use the pg_tables system catalog table to look up the table name from the oid.
You must return the proper value depending on the operation, or the operation may fail. INSERT and UPDATE operations need to have NEW returned; DELETE needs to have OLD returned.
The name of the trigger starts with "ZZZ" to make sure that it fires after any other triggers on the same table have succeeded (they are fired in alphabetical order). If a prior trigger fails, this trigger function will not be called, which is the proper behaviour because the insert, update or delete will not take place either.
TRIGEER-->To get a column value from one table to other table when i insert values?
I am having two tables(customer_details and loan_balance).
What i need is, I must get the column (custid)of customer_details table to the loan_balance table when i insert the data into the loan_balance table.
This is the full set up of my query : SQL FIDDLE
So i need a trigger to be raised and the data should be updated automatically without dynamic insertion of custid.
Postgres has an unconventional way of creating triggers:
create a function that returns type trigger and return the NEW row record
create a trigger that executes the function
Here's the code you need:
CREATE FUNCTION synch_custid_proc()
RETURNS trigger AS $$
BEGIN
NEW.custid = (
select max(custid)
from customer_details
where creditid = NEW.creditid
);
RETURN NEW;
END;
$$ LANGUAGE plpgsql
CREATE TRIGGER synch_custid_trig
BEFORE INSERT ON loan_amount
FOR EACH ROW
EXECUTE PROCEDURE synch_custid_proc();
I chosen to select max(custid) rather than simply custid when finding the value in case there are multiple rows that match. You might have to adjust this logic to suit your data.
See a live demo on SQLFiddle