When running
sudo /usr/bin/perl install-module.pl mod_perl2
command to install mod_perl for installing bugzilla in apache2 Ubuntu. I got the following error. I have installed apache2 ,MySql and Perl.
Checking for CPAN (v1.81) ok: found v1.960001
Checking for YAML (any) ok: found v0.84
Checking for ExtUtils-MakeMaker (v6.31) ok: found v6.82
Going to read '/root/.cpan/Metadata'
Database was generated on Wed, 20 Nov 2013 19:08:54 GMT
Installing mod_perl2 version 2.000008...
Running install for module 'mod_perl2'
Running make for P/PH/PHRED/mod_perl-2.0.8.tar.gz
Checksum for /root/.cpan/source/authors/id/P/PH/PHRED/mod_perl-2.0.8.tar.gz ok
CPAN.pm: Going to build P/PH/PHRED/mod_perl-2.0.8.tar.gz
Reading Makefile.PL args from #ARGV
no conflicting prior mod_perl version found - good.
************* WARNING *************
Your Perl is configured to link against libgdbm,
but libgdbm.so was not found.
You could just symlink it to /usr/lib/x86_64-linux-gnu/libgdbm.so.3.0.0
************* WARNING *************
Next we need to know where the 'apxs' script is located. This script
provides a lot of information about the Apache installation, and makes
it easier to find things on your system. Normally it's located in the
same directory as the 'httpd' executable.
If you don't yet have Apache installed you can build Apache against
the Apache source code, but you won't be able to run the test suite (a
very important step). Therefore you may want to install Apache before
proceeding.
Please provide a full path to 'apxs' executable
(press Enter if you don't have it installed):
Please provide the location of the Apache directory:
[ error] Can't find dir ''
Please provide the location of the Apache directory:
[ error] Can't find dir ''
To resolve the perl lib issue, cd /usr/lib/x86_64-linux-gnu/ then link libgdbm.so.3.0.0 to libgdbm.so.
ln -s libgdbm.so.3.0.0 libgdbm.so.
That should clear up the first warning.
For the apxs issue, you need to install apache2-dev.
on Ubuntu use the following command
sudo apt-get install apache2-dev
Rerun and that should correct it.
Related
Can someone please tell me how to download dmake with Perl?
I have tried with CPAN, but this is what I get:
cpan> install dmake
Database was generated on Wed, 10 Jul 2019 10:13:05 GMT
Running install for module 'dmake'
'" "' is not recognized as an internal or external command,
operable program or batch file.
Checksum for C:\STRAWB~1\cpan\sources\authors\id\S\SH\SHAY\dmake-4.12.2.2.zip ok
Scanning cache C:\STRAWB~1\cpan\build for sizes
............................................................................DONE
Package contains both files[ChangeLog COPYING dmake.exe META.yml NEWS PATCH.TXT README.TXT] and directories[man readme startup]; not recognized as a perl package, giving up
Configuring S/SH/SHAY/dmake-4.12.2.2.zip with Makefile.PL
Running make for S/SH/SHAY/dmake-4.12.2.2.zip
gmake: *** No targets specified and no makefile found. Stop.
SHAY/dmake-4.12.2.2.zip
C:\STRAWB~1\c\bin\gmake.exe -- NOT OK
Stopping: 'install' failed for 'dmake'.
Failed during this command:
SHAY/dmake-4.12.2.2.zip : writemakefile NO -- Package contains both files[ChangeLog COPYING dmake.exe META.yml NEWS PATCH.TXT README.TXT] and directories[man readme startup]; not recognized as a perl package, giving up
I have also tried with ppm install dmake, but I got this:
Installing package 'dmake'...
Error installing package 'dmake': Could not locate a PPD file for package dmake
Not answering the question because it's a XY problem, but giving you the info you need.
The most recent mod_perl2 compiled for Strawberry is against Perl 5.12, which is long out of support. Using any other version of Perl is not going to work. You should ask ApTest to update and recompile for a current Strawberry and release a new setup_spmp helper. They are relying on a dead piece of tech (mod_perl2), so they should either support the required dependency properly or move their application onto a modern stack.
I am trying to install one of the Perl module in my local system (Windows 7). But its failing to install the module
Here is what its displaying
C:\Windows\system32>perl -MCPAN -e "install Net::SFTP"
Reading 'C:\Users\AppData\Local\.cpan\Metadata'
Database was generated on Sun, 26 May 2019 05:17:03 GMT
Running install for module 'Net::SFTP'
Checksum for C:\Users\AppData\Local\.cpan\sources\authors\id\L\LK\LKINLE
Y\Net-SFTP-0.12.tar.gz ok
Configuring L/LK/LKINLEY/Net-SFTP-0.12.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite Math::Int64 0.54 not found.
Warning: prerequisite Net::SSH::Perl 2.12 not found.
The getpwuid function is unimplemented at C:/Perl64/lib/ExtUtils/MakeMaker.pm li
ne 1064.
Warning: No success on command[C:\Perl64\bin\perl.exe Makefile.PL INSTALL_BASE=~
/perl5]
LKINLEY/Net-SFTP-0.12.tar.gz
C:\Perl64\bin\perl.exe Makefile.PL INSTALL_BASE=~/perl5 -- NOT OK
It was working fine before and I have installed couple of modules, don't know what happens suddenly.
Please help me to resolve this. Do I need to make any modifications in config?
You're telling Perl to into ~/perl5. That's not a Windows path, and ExtUtils::MakeMaker is using a unix-specific function (getpwuid) to expand it. Your problem should go away if you use a Windows path.
That said, if you have access to write to C:\Perl64\..., I suggest that you install modules to the default directory by removing INSTALL_BASE=~/perl5.
If you don't have access to write to C:\Perl64\..., I suggest that you install Perl itself in a directly to which you do have access to write, and then I'd install modules to the default directory by removing INSTALL_BASE=~/perl5.
Since you didn't actually specify INSTALL_BASE=~/perl5 on the command line, you are specifying it through the environment (PERL_MM_OPT and PERL_MB_OPT), or in cpan's configuration (o conf from within cpan).
I am installing perl module "WWW::Curl::Easy" but it's getting error I also use by fource install but it's getting same error. why this is happend plz help me out.
I used these command in cpan
perl -MCPAN -e shell
force install WWW::Curl::Easy
cpan[1]> force install WWW::Curl::Easy
Reading '/root/.cpan/Metadata'
Database was generated on Thu, 16 Feb 2017 05:17:02 GMT
Running install for module 'WWW::Curl::Easy'
Checksum for /root/.cpan/sources/authors/id/S/SZ/SZBALINT/WWW-Curl-4.17.tar.gz ok
Scanning cache /root/.cpan/build for sizes
............................................................................DONE
Configuring S/SZ/SZBALINT/WWW-Curl-4.17.tar.gz with Makefile.PL
Locating required external dependency bin:curl-config... missing.
Unresolvable missing external dependency.
Please install 'curl-config' seperately and try again.
NA: Unable to build distribution on this platform.
No 'Makefile' created SZBALINT/WWW-Curl-4.17.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- NOT OK
Failed during this command:
SZBALINT/WWW-Curl-4.17.tar.gz : writemakefile NO -- No 'Makefile' created
I use this and it's install "WWW::Curl::Easy" Module without any error
apt-get install libwww-curl-perl
On Red Hat try:
yum install curl curl-devel
installing only curl didn't work for me.
It is telling you the problem
Locating required external dependency bin:curl-config... missing.
Unresolvable missing external dependency. Please install 'curl-config'
seperately and try again.
So install curl-config and try again. Always check for dependencies.
Installing curl-config methods depends on the OS.
for Redhat for instance it will be
yum install curl
FreeBSD 12.2-RELEASE
cd /usr/ports/www/p5-WWW-Curl
make install clean
...
(cleaning for curl-7.80.0
cleaning for p5-WWW-Curl)
I'm having a tough job trying to get GD installed. I'm running a Mas OSX 10.9.2 darwin 13.0.1
When I run this:
cpan[1]> install GD
perl -MCPAN -e shell
I get the follwing error:
cpan[1]> install GD
Reading '/Users/me/.cpan/Metadata'
Database was generated on Sun, 21 Dec 2014 18:53:17 GMT
Running install for module 'GD'
Running make for L/LD/LDS/GD-2.56.tar.gz
Checksum for /Users/me/.cpan/sources/authors/id/L/LD/LDS/GD-2.56.tar.gz ok
Scanning cache /Users/me/.cpan/build for sizes
............................................................................DONE
CPAN.pm: Building L/LD/LDS/GD-2.56.tar.gz
Configuring for libgd version 2.0.11.
Checking for stray libgd header files...none found.
GD library used from: /usr/local
Please choose the features that match how libgd was built:
Undefined subroutine &main::prompt called at Build.PL line 169.
Warning: No success on command[/usr/bin/perl Build.PL ]
'YAML' not installed, will not store persistent state
LDS/GD-2.56.tar.gz
/usr/bin/perl Build.PL -- NOT OK
Running Build test
Make had some problems, won't test
Running Build install
Make had some problems, won't install
Could not read metadata file. Falling back to other methods to determine prerequisites
Failed during this command:
LDS/GD-2.56.tar.gz : writemakefile NO '/usr/bin/perl Build.PL ' returned status 512
Build.PL is trying to call a function called prompt but it doesn't exist. This is because they recently switched build systems from ExtUtils::MakeMaker (Makefile.PL) to Module::Build (Build.PL) but didn't fully convert the program. I've reported the bug.
Most people don't notice this because the prompting is only necessary if GD can't configure itself. It does this by looking for the gdlib-config program. If that can't be found, or it doesn't work, it will ask you for your gdlib configuration. It's best to let gdlib-config take care of that. Best way to solve this problem is to make sure gdlib-config is somewhere in your PATH and that gdlib-config --all works.
Otherwise replace all the instances of prompt in Build.PL with Module::Build->prompt and it should work.
I'm not sure about doing this on OSX, but I recently had similar problems with installing CPAN modules on CentOS.
Some prerequisite modules simply wouldn't install properly from CPAN. These modules had RPMs available. After installing some of the prerequisites via yum, I was able to get CPAN to install the modules I needed.
In particular, I had to install Module-Build and Archive-Tar (which brought in a number of other dependency rpm's) using yum.
Hope this helps.
I am having an infuriating time trying to get an install of apache with perl. I am following the instructions on the mod_perl site located here: http://perl.apache.org/docs/2.0/user/install/install.html
I get as far as the part where it asks me to run this command, but I get an error:
$ perl Makefile.PL MP_APXS=/usr/local/httpd/prefork/bin/apxs
Reading Makefile.PL args from #ARGV
MP_APXS = /usr/local/httpd/prefork/bin/apxs
no conflicting prior mod_perl version found - good.
Configuring Apache/2.4.2 mod_perl/2.0.7 Perl/v5.12.3
[ error] Can't find apr include/ directory,
[ error] use MP_APR_CONFIG=/path/to/apr-config
I ran the commands they suggested for installing apache to install my apache:
$ ./configure --prefix=$HOME/httpd/prefork --with-mpm=prefork
$ make && make install
But I am not sure where this apr-config thing is supposed to be as it doesn't appear to be anywhere in my apache2 folder.
If it might be an issue, I am using Mac OS X 10.7.3. I know an apache server comes with Mac OS X, but I need to do this install on a different computer from the ground up, so I have to start this whole install from the ground up on my computer.
Thanks ahead of time for any help you can provide.
When mod_perl 2.0.8 comes out, I hope that it gets finally httpd 2.4 support, because the current versions surely don't have.
When you fix your initial problems, you will eventually get stuck at ‘conn_rec’ has no member named ‘remote_ip’. Delete httpd 2.4 and use 2.2 meanwhile.
You need to include the path to binary executable file apr-1-config. Run the below command
perl Makefile.PL MP_APXS=/usr/local/apache2/bin/apxs MP_APR_CONFIG=/usr/local/apr/bin/apr-1-config
It worked for me..Hope the same for you too.
On Lion here, my APR include directory seems to be /usr/include/apr-1, but it already came with mod_perl.
$ find / -name apr*
/usr/include/apr-1
...
$ find / -name mod_perl.so
/usr/libexec/apache2/mod_perl.so
If you have the .so already you should be able to just add in your config file:
LoadModule perl_module libexec/apache2/mod_perl.so