I followed this,
Go download and install VS Web Essentials
Add a new Item to your project, pick CoffeeScript as the item type
Write your CoffeeScript code, when you build the project or Solution, it will create the JavaScript code.
But, it does not create any compiled JS file.
How can I compile coffeescript? Do I need to install node.js?
I haven't tried Web Essentials for VS yet because it's easier for me to just include the coffee-script.js file using a script tag and compile it using the browser. I also console.log the compiled JavaScript output to the browser to see what it is generating. Here are a few examples using this technique:
https://github.com/jabdal/coffee-script-examples
Remarkably, it will sometimes find errors in the resultant JavaScript and go to the line with the error.
I'm guessing you could then send the JS back to the server and save that to a JS file (along with a checksum of the original coffeescript file). Then instead of compiling next time, you could include the JS file that is on the server if it is the same version (compare checksum before compiling on client).
I've read somewhere there is a .NET implementation of JavaScript that might work with the coffeescript compiler so that you could compile on the server without having to use Node but I don't think it would hurt to offload it on the client. A nice way would be a runat="server" tag for script type="text/coffeescript" tag so that the server would replace the coffeescript tags with javascript tags along with the compiled code and also generate corresponding js files where there are coffee files.
Related
I'm trying to use coffeescript for my client-side code in Meteor, but it doesn't seem to work..
I've created client/views/welcome/index.coffee with the following content:
console.log 'this is welcome index'
But the console isn't logging anything and I don't see the file being loaded at the client.
Run the following command to add the coffeescript package to Meteor, which will enable the transpiling of coffeescript source:
meteor add coffeescript
Otherwise, coffeescript files will be silently ignored (there was a suggestion to improve this behavior). For now, you can make sure the package is added by checking for it in .meteor/packages.
I have downloaded and started the community version of SFSx2. I read everything on their documentation page:
http://docs2x.smartfoxserver.com/DevelopmentBasics/introduction
Which unfortunately only talks about flash client side code. Nothing about the corresponding server side code, nor about html5 client side which I need.
I downloaded the HTML5 examples, which took me a long time to find (they are here: http://www.smartfoxserver.com/download/get/140 )
None of the examples work, as they can't connect to the server. Presumably, this is because the examples only supply client side code. There are no instructions supplied on how to install or run the examples.
I can find no mention on the smartfox documenation on the following:
1) what language is used on the server side. One assumes its java.
2) how does one deploy java code to the smartfox server? I cant find any mention of this in the docs.
3) how does one find and install the server part of the client side examples (which are Tris, GameLobby, BuddyMessenger, AdvancedChat).
I applied to be allowed to post on the smartfoxserver forums, but no reply yet.
I also found it hard so I share what I've found out.
The server extensions are written in Java. I used Eclipse JUNO to write my code.
You can download Eclipse here. http://www.eclipse.org/downloads/
You export the extension in jar format from eclipse into you extension path. The name of your file has to end in 'extension' eg MyFirstExtension.jar otherwise sfs2x wont recognize it. Your extension path will be something like this: C:\Program Files\SmartFoxServer2X\SFS2X\extensions\MyFirstExtension\MyFirstExtension.jar if your working in windows.
You will find docs on JAVA API here. http://docs2x.smartfoxserver.com/api-docs/javadoc/server/
This is a link to the basic example code: http://www.smartfoxserver.com/download/get/120
Unzip the content into the [SFS2X_install_folder]/SFS2X/www/root/examples folder, overwriting the existing file. Run the index.html file, then navigate to another index.html to open the example. Run the sfs2x-standalone.exe first of course(see below). If you followed the 'server configuration tutorial' on smartfox website and changed the server ports, the examples wont work. Leave the ports alone until you start to understand the server.
This is a link to the flash example code: http://www.smartfoxserver.com/download/get/108
You will find the example code for apps mentioned above. They are written in Adobe Flash Builder and Java extensions. I don't know if there is any code for HTML5 but the Java server code and AS3 is there.
I also found that using the standalone server was the way to go rather than using SFS2x as a service. c:\program files\smartfoxserver2x\sfs2x\sfs2x-standalone.exe. Using the exe gives you the command prompt window. You can use the window for debugging and see the state of the server when it starts.
Most of the examples should work without creating extensions but to create an extension out of source examples:
Create and setup a new project in your Java IDE. You will have already set up a workspace.
Copy the content of the /source/server/src folder to your project's source folder.
Add SFS2X Libraries. Go to properties of the project -> Select Java Build Path -> Click Library Tab -> Add external jar. Add 'sfs2x.jar' and 'sfs2x-core.jar' from C:\Program Files\SmartFoxServer2X\SFS2X\lib folder. To create the extension, export jar file to extension path. Restart server.
Another problem I had was the Java Version I was using. I had to use Java1.6 with my version of sfs2x when writing extensions. This was trial and error as there was no documentation. There may be a newer version out now.
I had to copy all the server source into eclipse to try and understand how things were done. It was a way of having all the code in one place. There was a lot of trial and error as getting help is hard. I eventually accomplished what I set out to achieve. Good Luck.
SmartFox Server is easy to use even with extension. documentation Give try to Nuggeta solution for game development too. No extension needed at first. This is optionnal.
We have full HTML5 open source game walkthrough on github
I've used Yeoman to make a quick project skeleton using the yo webapp generator command. In the resulting Gruntfile I see that it's setup to compile CoffeeScript but it seems like its just sticking compiled files in a tmp folder.
coffee: {
dist: {
files: {
'.tmp/scripts/coffee.js': '<%= yeoman.app %>/scripts/*.coffee'
}
},
},
How do these get included in the project during development. I'm not using RequireJS.
The yeoman docs are unclear on how to use coffeescript. They only mention that it gets automatically compiled.
Using yeomen 1.0.0-rc1.4. I use:
$ yo angular --coffee
The resulting project has controller and app scripts in CoffeeScript.
grunt configuration file remains in js (what is not really a problem).
Running
$ grunt test
runs tests and all seems fine.
$ grunt server
is also doing what one expects (build the app, test it, starts server, opens the app in web browser and starts watching for changes, so if I change a coffee script file, it is quickly reflected in the web broser.
Documentation also states, one can use yo to add particular pieces like
angular:controller
angular:directive
angular:filter
angular:route
angular:service
angular:decorator
angular:view
each can be called with a --coffee switch and get the script in CoffeeScript, e.g.:
yo angular:controller user --coffee
I just found an issue in the github repo referencing this problem. https://github.com/yeoman/generator-webapp/issues/12
It offers a temporary solution: https://github.com/yeoman/generator-webapp/issues/12#issuecomment-13731929
I'm currently working on an shared library based on mono, where I want to put as much business logic of my app as possible.
I used this helpful tutorial.
I managed putting the whole logic for rest-requests in this shared library, but now I'm stuck with soap.
I used the wsdl command of mono to generate Client Stubcode from my wsdl (as described here http://www.mono-project.com/Web_Services).
When I put the generated class to my C# library, which is the root project of my shared library, there is a warning that the Reference to System.Web.Services cannot be found.
So I included the System.Web.Services.dll manually.
For the Android Library Project I added a Reference to ...\Reference Assemblies\Microsoft\Framework\MonoAndroid\v1.0\System.Web.Services.dll. It compiles without warnings.
But now it comes to the Windows Phone Library Project.
There is no System.Web.Services.dll for WP 7.5, right? I tried with the Mono-Touch dll but it gives me a lot compilation Errors.
Someone knows how I can get out of this?
I actually had some issues with the generated WSDL myself. Turns out that the classes that were generated through the "Create Web Reference" piece of Visual Studio inside of a Mono for Android project ended up causing some big issues when connected to a WCF Web Service. Not sure where I ran into this information, but this is what I ended up doing.
What you need to do is manually create a Service Reference using the SILVERLIGHT SVCUtil.
On my development system it was located here:
C:\Program Files (x86)\Microsoft SDKs\Silverlight\v3.0\Tools
I called it with the below command line:
slsvcutil.exe http://localhost/<path to WCF service endpoint>/service.svc /directory:"<temp directory to store generated cs file>" /noConfig /namespace:"*,<Full namespace of the generated class>"
That will actually generate a CS file that is saved into the path specified by the /directory tag above. Copy that generated cs file to your project directory and then include it in the project.
The problem that I was having that forced me to look for another option was that I was able to pull the data properly using the WSDL generated through the "Add Web Reference" option in Visual Studio, but as soon as I tried to pass the data back up the wire to the web service, everything blew up. Using the Service Reference generated by the Silverlight Service Util actually generated all the code properly for Async operations and after learning how to properly manage those Async operations everything works like a dream.
Since you are generating this new WSDL using the Silverlight Utility, it should work just fine through Windows Phone 7. I believe that the DLL to reference for all of this is the System.ServiceModel dll.
I wish I could remember where I ran across this information, as I would like to give the original author credit, but unfortunately, I don't recall that.
Hope that helps out!
Chaitanya Marvici
I've just picked up CoffeeScript and I'm struggling to understand the deployment workflow. It seems you constantly have to compile the .coffee files before using them. (Yes, I'm aware that you can have it embedded in the browser, but that's not recommended for production applications).
Does one have to constantly (manually) compile the files before deploying? (For example, if using Eclipse, a simple Ctrl+S saves and deploys the .war/.ear on the local machine's server.) Do we have to change the build scripts (for a central, possible CI server) for deploying .coffee files? Is there anyway to have integrated compiling via the IDEs (Eclipse/Netbeans)
Any ideas/pointers/examples on this? How/what have you used in the past?
I call browserify in my Cakefile to pre-compile and package my CoffeeScript for the browser. For an example of how I call browserify as well as coffeedoc and coffeedoctest take a look at the Cakefile for my Lumenize project.
If you are using express or some other node based server, you can have your CoffeeScript compiled at request time, using tools like NibJS or as described in The Little Book on CoffeeScript (Applications chapter), you can use Stitch. BTW, I highly recommend, The Little Book. The "Compiling" chapter has information about Cake and compiling that might help you.
Yes, you should have a build script. Most CoffeeScript projects use a Cakefile for this; see, for example, 37signals' pow. With a Cakefile, you can just run
cake build
from the command line to run the build task in the Cakefile.
You can run the Cakefile on a CI server, assuming that you have Node and CoffeeScript installed on that server.
Don't deploy the coffee files, use something like "coffee -cwj" to constantly watch and compile the .coffee files into javascript (.js) files and deploy those.
The options are c=compile, w=watch and j=join the files.
See the coffee-script web site for details of the options you can pass in.