I am trying to get started with Eclipse SCADA and import the projects from their git repository.
I have cloned the following projects:
org.eclipse.scada.external
org.eclipse.scada.utils
org.eclipse.scada.base
org.eclipse.scada.protocols
org.eclipse.scada.core
org.eclipse.scada.releng
For each project I did mvn verify in the parent folder and imported the projects in Eclipse. I also changed target platform. However, I still seem to have problems with their dependencies.
Any help would really be appreciated.
Actually the Eclipse SCADA java projects are not developed with "Maven first". So you should disregard maven completely while in the IDE. The maven build is basically only used to build the project unattended.
The issue with the target platform is more complex. We were a bit sloppy in providing a always working target platform (and it is actually difficult to keep them up to date, since the versions of the bundles are fix).
I made a target platform file for the current version, you can find it here: https://gist.github.com/CptMauli/ec6eda37734f0108510f
To make it work properly please download a classic eclipse put it somewhere and create an environment variable ECLIPSE_432_HOME which points to it. Alternatively you can just change the first entry in the target file and point it directly to it.
The reason behind it is, if you would use your own eclipse installation, it is possible that bundles installed there conflict with bundles provided in the target platform or from your workspace. This is actually mostly not even a problem when compiling, but as soon as you start a client or a server, Eclipse will complain about duplicated bundles.
If you have any more questions please go to our mailing list: https://dev.eclipse.org/mailman/listinfo/scada-dev
or our google group: https://groups.google.com/forum/#!forum/openscada
or write to me directly at juergen dot rose at ibh-systems dot com
Related
I'm currently using JUnit 5.1, but I want to switch to JUnit 5.5 (at least 5.4) to use new features of that version (mainly the #Order annotation), but I'm really struggling to properly set it up.
Unfortunately I cannot simply switch to a newer eclipse version, because I'm tied a specific version we use at my workplace.
As there is no JAR-download, i've tried to build it from source. The only guidelines concerning this are saying to build it with Gradle, but I don't understand how to do this.
What I tried so far:
- downloaded the repository as an archive (zip) and imported it to eclipse, which resulted in multiple projects and <1.000 errors
- imported the repository into eclipse (via import wizard), but failed to find a way to make a build from it
I was able to run some test with JUnit 5.4 features, but i achieved this by downloading different modules as JARs from some maven-repository I found in a JUnit issue on github and including them as external JARs into the classpath. This was very tedious because of the number of different JARs & the way they were organized in the repository folders.
To me this feels like a workaround, as I still have no idea how to solve the initial problem of building JUnit from source.
I'm quite new to eclipse and have a basic understanding of what Gradle is, but I've never used it so far.
I don't expect a detailed step-by-step guide on how to achieve this (although I wouldn't complain ;) ), but I'd really appreciate it, if you could give me an outline of how building from source is done in general and maybe additional references for me to read about certain steps (e.g. setting up gradle).
I want to import a maven project from GitHub into intellij which in of itself I know how to do however, the project this time was created initially also as an eclipse project and I want to be able to work on it in idea while my team members work on it in eclipse without causing conflicts due to differing project file structures. How can this be done?
When checking it out in Intellij it does ask me if I want to create a project from it and select yes but next, it asks whether to create the project from the existing sources vs from external model. From the external model option it allows me to pick eclipse or maven but not both. Do I just create from existing sources? Which is my best option to do this without screwing it up for the others when I commit and push my changes?
I understand that the easy answer might be: "just use eclipse" however, I think the answer on how to properly do this could be useful later. Not only me but also for others who want to work with the IDE they are most familiar and productive with and not mess with the workflow.
Any help would be appreciated
When importing an Eclipse project into IntelliJ, you have the option to:
Create module files near .classpath files
Keep project and module files in
The idea is to keep your *.iml file concurrently with your Eclipse .project/.classpath (and you can keep them in sync).
That way, you can open the project in both IDE.
I'm trying out Java 9 Jigsaw module system (no module experience yet) and would like to use it for capsuling the classes within my project, but it's confusing.
According to this article it should be possible to have multiple modules within ONE project. I made a new project in Eclipse Oxygen (Java 9 is supported) with the same structure as shown in the article. But Eclipse keeps telling me that I must not have more than one module-info.java in a project.
I really don't know how to tell Eclipse that it should use the "multi-module-mode". And I really would appreciate not having to create a new project for every single module.
This works:
This not:
But according to this article something like that should work:
And how about deployment of a modularized project with Eclipse? There is nothing to see about the new jmod extension. Do I still export it as a runnable JAR file like before?
Notice that my questions refer to working with the IDE (no command line, I mean with an IDE that should be possible, right?) Thank you for enlightening me.
Currently, Eclipse requires you to create a separate project for each module (e. g. because each module has its own Java Build Path).
To understand this design decision, consider that Java modules correspond to OSGi bundles / Eclipse plug-ins and it has always been to have a separate project for each bundle/plug-in. If you come from the Maven world, you would probably expect a deeper folder structure instead. But modules are self-contained and combining several modules into one project would only add an additional folder level without meaning. However, Eclipse supports nested projects and so-called working sets if you need an additional folder level.
Exporting modules as images is planned for Eclipse 2019-03 (4.11), on March 20, 2019 (see Eclipse bug 518445). Exporting modules as JARs that can be used on the modulepath (-m) already works (see my video).
I don't know if this question is still open for an answer, but you can solve this problem by simply removing all source folders on the build path. At least this works for Eclipse 2021-12 version.
As you can see this is a demo project from the Official Gradle Guide Book and it has multiple modules. Each module has its own module-info.java.
project structure in IntelliJ IDEA
If I open this project in Eclipse it will give me the 'duplicated entries on module-info.java' error.
Eclipse shows the error
But if I delete all the source folders on the build path, the error is gone and the project can be built and run without problem.
project properties: Java build path
The only problem is that you have to build the project with Gradle so that it will produce the .jar of each module and you have to include them in the libraries later.
include all the .jar in libraries
I think this is probably the same solution mentioned by howlger above.
I'll try keep this short. I have Eclipse with an installed M2E (Maven to Eclipse) plugin. I have a GAE (Google App Engine) project I'm working on. Everything is working ok apart from one really annoying thing: I have to stop/start the devserver every time I make a change.
If you have any experience with this setup then you might be able to answer this simple question?
I start the development server with "mvn appegnine:devserver" on the command line. Now I would expect that if I made changes to a *.jsp for example that those changes would automatically be updated on the devserver. Is this what happens with you?
I have noticed that if I make changes to *.jsp files under my target folder then devserver will see those changes and updates as I would expect. I think my problem lies with Eclipse not copying changes to target folder, but not sure if is even suppose to?
Does anyone have any suggestions on how I should progress investigating this? I've ran out of ideas :-/
I thank you in advance for any comments you may have.
P.s I know I can run "mvn package" to update files, but this is slow and the devserver runs out of memory after a do it twice.
This can be little painful, depending on how you want to work and which version of eclipse you're using.
Install the m2e-wtp plugin if you haven't. It's the secret sauce that makes appengine projects work in eclipse. Note this isn't m2e - but another plugin.
Install the GPE - the google plugin for eclipse if you haven't
Make sure your project is being managed by m2e as a maven project.
Go into your project properties - enable it as an appengine project using the GPE (listed under 'Google'). Don't forget to tick HRD while you're here.
Go to your project build path (Properties -> Java Build Path).
Ensure on the source tab that your src/main/resources doesnt have an ** exclusion.
Ensure on the libraries tab your have the three libraries 'JDK', 'Google Appengine' and 'Maven Dependencies' and nothing else
Ensure on the order and export tab that the appengine dependencies are above the maven dependencies.
It sounds pretty ridiculous - i'm not really sure why its still so painful, but that is a good recipe for success. Once that's done, this should allow you to run in debug from eclipse itself, with hotloading of code, jsps, css, scripts etc. I've had this work in helios, indigo and juno.
You can read more about the m2e-wtp setup instructions here. They refer to GWT but it's the same for appengine (I'm not sure why the emphasis on using GWT on GAE) because its actually about the correct setup of GPE and Maven.
You will also find that you may need to repeat some parts of step 5 pretty frequently - if your app isn't loading properly take a quick look to ensure that your resources haven't been excluded. This happens when you update your project configuration using the m2e plugin.
The wtp-m2e plugin updates the target folder as resources modified - so this should also resolve your issues running from the command line, but i can't vouch for that - I prefer to run straight out of eclipse.
I have the same problem as you, however I resolved with other way. I use FileSync plugin (which can be found in the market place).
With this plugin you configure an input directory (webapp) and output directory (target).
Any change made to the webapp will be passed to the target.
I have helped too.
You can use rsync like this:
rsync -r --existing src/main/webapp/ target/ROOT
where "ROOT" is the project build finalName.
The below point worked for me.
Ensure on the order and export tab that the appengine dependencies are above the maven dependencies.
I am currently trying to get my headless pde-build working but I am stuck on a point where I do not know how to continue.
The problem is how to define the related target platform to compile the plugins against.
I have a build.bat with the following call (all in one line!):
java -jar D:\target\eclipse\plugins\org.eclipse.equinox.launcher_1.0.201.R35x_v20090715.jar
-application org.eclipse.ant.core.antRunner
-f D:\target\eclipse\plugins\org.eclipse.pde.build_3.5.2.R35x_20100114\scripts\productBuild\productBuild.xml
-Dbuilder=c:\pde-build\scripts %*
I tried to create the target eclipse platform from different parts: The eclipse SDK, RCP SDK, Delta Pack, PDE-SDK in all combinations but none of them worked well.
I got the following error:
BUILD FAILED
D:\target\eclipse\plugins\org.eclipse.pde.build_3.5.2.R35x_20100114\scripts\productBuild\productBuild.xml:18: Cannot fin
d ${eclipse.pdebuild.scripts}/build.xml imported from D:\target\eclipse\plugins\org.eclipse.pde.build_3.5.2.R35x_2010011
4\scripts\productBuild\productBuild.xml
where the variable ${eclipse.pdebuild.scripts} does not got resolved. I also tried to give this parameter via the command line but then I got another error regarding missing svn task which is absolutely confusing as this is working with my local eclipse installation referenced.
When I replace the path from d:/target/eclipse to my local eclipse installation the pde build works as expected!
This leads my to the point that the configuration of the target eclipse is not correct but in the moment I have no idea how to configure this!
My goal is the automate the pde build first on my local site without referencing my local eclipse and later on integrate this building process into our running cruisecontrol instance.
As I saw already another question about defining the target eclipse I would be happy if anyone can contribute hints or facts regarding the problem.
Regards,
Andreas
When performing a headless build, the target can be separate from the eclipse that is actually running the build itself. The problem you had here is that the eclipse that you were using to run the build did not have PDE/Build properly installed.
This is why the ${eclipse.pdebuild.scripts} was not set, because PDE/Build was not installed into that eclipse instance, the org.eclipse.pde.build bundle was not resolved and the code that sets this property never got called. Similarly, the necessary ant classpath entries for PDE/Build tasks would not have been set up properly either.
You need the Eclipse with PDE installed inside to run the build, but the target for the build can be separate from this.
In the build.properties file found under -Dbuilder=c:\pde-build\scripts you can set several properties:
baseLocation This is a path to an eclipse that is your target.
buildDirectory This is where the build will actually take place, source is fetched to plugins/ and features/ subfolders, but if there are already binary plugins located here then those become part of the target as well.
pluginPath This is a list of paths (separated with ';' on windows or ':' on linux) containing other locations that should be considered as part of your target. These locations can be several things:
The root of an eclipse-like install with plugins/ and features/ subfolders. This is a good way to provide the delta-pack instead of just unzipping it on top of an eclipse install.
The root of a workspace-like folder, where all subfolders are treated as plugins or features depending on the presence of a manifest or feature.xml.
The root of a bundle or feature, or the jar for a bundle.
If you are doing a p2 build (p2.gathering = true) you can also provide p2 repositories under a ${repoBaseLocation} which will be transformed and placed under ${transformedRepoLocation} and will become part of your target, and the p2 metadata there will get reused during the build.
after some more time of investigation I found out, what I did wrong so far. As I mentioned above defining the target platform is not that easy as copying the SDK and plugins in into one location (as it was in early times of eclipse dev).
The working solution by now is the following: Copying the eclipse SDK into the target location and run this version. Install inside this the neccessary PDE-Tools to enable plugin development. After that, close the IDE and copy the delta pack + the respective svn plugin (I used org.eclipse.pde.build.svn-1.0.1RC2 from sourceforge) into the target platform and you're done.
Now my automated PDE build is running as expected.
Only minor issue now is the following: The result product contains eclipse-specific menu entries which are not there when I ran this from inside my dev-eclipse.
Any hints on that?
I just posted an answer to my question on this kind of topics, may be this can help you:
Plugin product VS Feature product