Related
I want to extract strings between two patterns with GREP, but when no match is found, I would like to print a blank line instead.
Input
This is very new
This is quite old
This is not so new
Desired Output
is very
is not so
I've attempted:
grep -o -P '(?<=This).*?(?=new)'
But this does not preserve the second blank line in the above example. Have searched for over an hour, tried a few things but nothing's worked out.
Will happily used a solution in SED if that's easier!
You can use
#!/bin/bash
s='This is very new
This is quite old
This is not so new'
sed -En 's/.*This(.*)new.*|.*/\1/p' <<< "$s"
See the online demo yielding
is very
is not so
Details:
E - enables POSIX ERE regex syntax
n - suppresses default line output
s/.*This(.*)new.*|.*/\1/ - finds any text, This, any text (captured into Group 1, \1, and then any text again, or the whole string (in sed, line), and replaces with Group 1 value.
p - prints the result of the substitution.
And this is what you need for your actual data:
sed -En 's/.*"user_ip":"([^"]*).*|.*/\1/p'
See this online demo. The [^"]* matches zero or more chars other than a " char.
With your shown samples, please try following awk code.
awk -F'This\\s+|\\s+new' 'NF==3{print $2;next} NF!=3{print ""}' Input_file
OR
awk -F'This\\s+|\\s+new' 'NF==3{print $2;next} {print ""}' Input_file
Explanation: Simple explanation would be, setting This\\s+ OR \\s+new as field separators for all the lines of Input_file. Then in main program checking condition if NF(number of fields) are 3 then print 2nd field (where next will take cursor to next line). In another condition checking if NF(number of fields) is NOT equal to 3 then simply print a blank line.
sed:
sed -E '
/This.*new/! s/.*//
s/.*This(.*)new.*/\1/
' file
first line: lines not matching "This.*new", remove all characters leaving a blank line
second lnie: lines matching the pattern, keep only the "middle" text
this is not the pcre non-greedy match: the line
This is new but that is not new
will produce the output
is new but that is not
To continue to use PCRE, use perl:
perl -lpe '$_ = /This(.*?)new/ ? $1 : ""' file
This might work for you:
sed -E 's/.*This(.*)new.*|.*/\1/' file
If the first match is made, the line is replace by everything between This and new.
Otherwise the second match will remove everything.
N.B. The substitution will always match one of the conditions. The solution was suggested by Wiktor Stribiżew.
I would like to update a large number of C++ source files with an extra include directive before any existing #includes. For this sort of task, I normally use a small bash script with sed to re-write the file.
How do I get sed to replace just the first occurrence of a string in a file rather than replacing every occurrence?
If I use
sed s/#include/#include "newfile.h"\n#include/
it replaces all #includes.
Alternative suggestions to achieve the same thing are also welcome.
A sed script that will only replace the first occurrence of "Apple" by "Banana"
Example
Input: Output:
Apple Banana
Apple Apple
Orange Orange
Apple Apple
This is the simple script: Editor's note: works with GNU sed only.
sed '0,/Apple/{s/Apple/Banana/}' input_filename
The first two parameters 0 and /Apple/ are the range specifier. The s/Apple/Banana/ is what is executed within that range. So in this case "within the range of the beginning (0) up to the first instance of Apple, replace Apple with Banana. Only the first Apple will be replaced.
Background: In traditional sed the range specifier is also "begin here" and "end here" (inclusive). However the lowest "begin" is the first line (line 1), and if the "end here" is a regex, then it is only attempted to match against on the next line after "begin", so the earliest possible end is line 2. So since range is inclusive, smallest possible range is "2 lines" and smallest starting range is both lines 1 and 2 (i.e. if there's an occurrence on line 1, occurrences on line 2 will also be changed, not desired in this case). GNU sed adds its own extension of allowing specifying start as the "pseudo" line 0 so that the end of the range can be line 1, allowing it a range of "only the first line" if the regex matches the first line.
Or a simplified version (an empty RE like // means to re-use the one specified before it, so this is equivalent):
sed '0,/Apple/{s//Banana/}' input_filename
And the curly braces are optional for the s command, so this is also equivalent:
sed '0,/Apple/s//Banana/' input_filename
All of these work on GNU sed only.
You can also install GNU sed on OS X using homebrew brew install gnu-sed.
# sed script to change "foo" to "bar" only on the first occurrence
1{x;s/^/first/;x;}
1,/foo/{x;/first/s///;x;s/foo/bar/;}
#---end of script---
or, if you prefer: Editor's note: works with GNU sed only.
sed '0,/foo/s//bar/' file
Source
An overview of the many helpful existing answers, complemented with explanations:
The examples here use a simplified use case: replace the word 'foo' with 'bar' in the first matching line only.
Due to use of ANSI C-quoted strings ($'...') to provide the sample input lines, bash, ksh, or zsh is assumed as the shell.
GNU sed only:
Ben Hoffstein's anwswer shows us that GNU provides an extension to the POSIX specification for sed that allows the following 2-address form: 0,/re/ (re represents an arbitrary regular expression here).
0,/re/ allows the regex to match on the very first line also. In other words: such an address will create a range from the 1st line up to and including the line that matches re - whether re occurs on the 1st line or on any subsequent line.
Contrast this with the POSIX-compliant form 1,/re/, which creates a range that matches from the 1st line up to and including the line that matches re on subsequent lines; in other words: this will not detect the first occurrence of an re match if it happens to occur on the 1st line and also prevents the use of shorthand // for reuse of the most recently used regex (see next point).1
If you combine a 0,/re/ address with an s/.../.../ (substitution) call that uses the same regular expression, your command will effectively only perform the substitution on the first line that matches re.
sed provides a convenient shortcut for reusing the most recently applied regular expression: an empty delimiter pair, //.
$ sed '0,/foo/ s//bar/' <<<$'1st foo\nUnrelated\n2nd foo\n3rd foo'
1st bar # only 1st match of 'foo' replaced
Unrelated
2nd foo
3rd foo
A POSIX-features-only sed such as BSD (macOS) sed (will also work with GNU sed):
Since 0,/re/ cannot be used and the form 1,/re/ will not detect re if it happens to occur on the very first line (see above), special handling for the 1st line is required.
MikhailVS's answer mentions the technique, put into a concrete example here:
$ sed -e '1 s/foo/bar/; t' -e '1,// s//bar/' <<<$'1st foo\nUnrelated\n2nd foo\n3rd foo'
1st bar # only 1st match of 'foo' replaced
Unrelated
2nd foo
3rd foo
Note:
The empty regex // shortcut is employed twice here: once for the endpoint of the range, and once in the s call; in both cases, regex foo is implicitly reused, allowing us not to have to duplicate it, which makes both for shorter and more maintainable code.
POSIX sed needs actual newlines after certain functions, such as after the name of a label or even its omission, as is the case with t here; strategically splitting the script into multiple -e options is an alternative to using an actual newlines: end each -e script chunk where a newline would normally need to go.
1 s/foo/bar/ replaces foo on the 1st line only, if found there.
If so, t branches to the end of the script (skips remaining commands on the line). (The t function branches to a label only if the most recent s call performed an actual substitution; in the absence of a label, as is the case here, the end of the script is branched to).
When that happens, range address 1,//, which normally finds the first occurrence starting from line 2, will not match, and the range will not be processed, because the address is evaluated when the current line is already 2.
Conversely, if there's no match on the 1st line, 1,// will be entered, and will find the true first match.
The net effect is the same as with GNU sed's 0,/re/: only the first occurrence is replaced, whether it occurs on the 1st line or any other.
NON-range approaches
potong's answer demonstrates loop techniques that bypass the need for a range; since he uses GNU sed syntax, here are the POSIX-compliant equivalents:
Loop technique 1: On first match, perform the substitution, then enter a loop that simply prints the remaining lines as-is:
$ sed -e '/foo/ {s//bar/; ' -e ':a' -e '$!{n;ba' -e '};}' <<<$'1st foo\nUnrelated\n2nd foo\n3rd foo'
1st bar
Unrelated
2nd foo
3rd foo
Loop technique 2, for smallish files only: read the entire input into memory, then perform a single substitution on it.
$ sed -e ':a' -e '$!{N;ba' -e '}; s/foo/bar/' <<<$'1st foo\nUnrelated\n2nd foo\n3rd foo'
1st bar
Unrelated
2nd foo
3rd foo
1 1.61803 provides examples of what happens with 1,/re/, with and without a subsequent s//:
sed '1,/foo/ s/foo/bar/' <<<$'1foo\n2foo' yields $'1bar\n2bar'; i.e., both lines were updated, because line number 1 matches the 1st line, and regex /foo/ - the end of the range - is then only looked for starting on the next line. Therefore, both lines are selected in this case, and the s/foo/bar/ substitution is performed on both of them.
sed '1,/foo/ s//bar/' <<<$'1foo\n2foo\n3foo' fails: with sed: first RE may not be empty (BSD/macOS) and sed: -e expression #1, char 0: no previous regular expression (GNU), because, at the time the 1st line is being processed (due to line number 1 starting the range), no regex has been applied yet, so // doesn't refer to anything.
With the exception of GNU sed's special 0,/re/ syntax, any range that starts with a line number effectively precludes use of //.
sed '0,/pattern/s/pattern/replacement/' filename
this worked for me.
example
sed '0,/<Menu>/s/<Menu>/<Menu><Menu>Sub menu<\/Menu>/' try.txt > abc.txt
Editor's note: both work with GNU sed only.
You could use awk to do something similar..
awk '/#include/ && !done { print "#include \"newfile.h\""; done=1;}; 1;' file.c
Explanation:
/#include/ && !done
Runs the action statement between {} when the line matches "#include" and we haven't already processed it.
{print "#include \"newfile.h\""; done=1;}
This prints #include "newfile.h", we need to escape the quotes. Then we set the done variable to 1, so we don't add more includes.
1;
This means "print out the line" - an empty action defaults to print $0, which prints out the whole line. A one liner and easier to understand than sed IMO :-)
Quite a comprehensive collection of answers on linuxtopia sed FAQ. It also highlights that some answers people provided won't work with non-GNU version of sed, eg
sed '0,/RE/s//to_that/' file
in non-GNU version will have to be
sed -e '1s/RE/to_that/;t' -e '1,/RE/s//to_that/'
However, this version won't work with gnu sed.
Here's a version that works with both:
-e '/RE/{s//to_that/;:a' -e '$!N;$!ba' -e '}'
ex:
sed -e '/Apple/{s//Banana/;:a' -e '$!N;$!ba' -e '}' filename
With GNU sed's -z option you could process the whole file as if it was only one line. That way a s/…/…/ would only replace the first match in the whole file. Remember: s/…/…/ only replaces the first match in each line, but with the -z option sed treats the whole file as a single line.
sed -z 's/#include/#include "newfile.h"\n#include'
In the general case you have to rewrite your sed expression since the pattern space now holds the whole file instead of just one line. Some examples:
s/text.*// can be rewritten as s/text[^\n]*//. [^\n] matches everything except the newline character. [^\n]* will match all symbols after text until a newline is reached.
s/^text// can be rewritten as s/(^|\n)text//.
s/text$// can be rewritten as s/text(\n|$)//.
#!/bin/sed -f
1,/^#include/ {
/^#include/i\
#include "newfile.h"
}
How this script works: For lines between 1 and the first #include (after line 1), if the line starts with #include, then prepend the specified line.
However, if the first #include is in line 1, then both line 1 and the next subsequent #include will have the line prepended. If you are using GNU sed, it has an extension where 0,/^#include/ (instead of 1,) will do the right thing.
Just add the number of occurrence at the end:
sed s/#include/#include "newfile.h"\n#include/1
A possible solution:
/#include/!{p;d;}
i\
#include "newfile.h"
:a
n
ba
Explanation:
read lines until we find the #include, print these lines then start new cycle
insert the new include line
enter a loop that just reads lines (by default sed will also print these lines), we won't get back to the first part of the script from here
I know this is an old post but I had a solution that I used to use:
grep -E -m 1 -n 'old' file | sed 's/:.*$//' - | sed 's/$/s\/old\/new\//' - | sed -f - file
Basically use grep to print the first occurrence and stop there. Additionally print line number ie 5:line. Pipe that into sed and remove the : and anything after so you are just left with a line number. Pipe that into sed which adds s/.*/replace to the end number, which results in a 1 line script which is piped into the last sed to run as a script on the file.
so if regex = #include and replace = blah and the first occurrence grep finds is on line 5 then the data piped to the last sed would be 5s/.*/blah/.
Works even if first occurrence is on the first line.
i would do this with an awk script:
BEGIN {i=0}
(i==0) && /#include/ {print "#include \"newfile.h\""; i=1}
{print $0}
END {}
then run it with awk:
awk -f awkscript headerfile.h > headerfilenew.h
might be sloppy, I'm new to this.
As an alternative suggestion you may want to look at the ed command.
man 1 ed
teststr='
#include <stdio.h>
#include <stdlib.h>
#include <inttypes.h>
'
# for in-place file editing use "ed -s file" and replace ",p" with "w"
# cf. http://wiki.bash-hackers.org/howto/edit-ed
cat <<-'EOF' | sed -e 's/^ *//' -e 's/ *$//' | ed -s <(echo "$teststr")
H
/# *include/i
#include "newfile.h"
.
,p
q
EOF
I finally got this to work in a Bash script used to insert a unique timestamp in each item in an RSS feed:
sed "1,/====RSSpermalink====/s/====RSSpermalink====/${nowms}/" \
production-feed2.xml.tmp2 > production-feed2.xml.tmp.$counter
It changes the first occurrence only.
${nowms} is the time in milliseconds set by a Perl script, $counter is a counter used for loop control within the script, \ allows the command to be continued on the next line.
The file is read in and stdout is redirected to a work file.
The way I understand it, 1,/====RSSpermalink====/ tells sed when to stop by setting a range limitation, and then s/====RSSpermalink====/${nowms}/ is the familiar sed command to replace the first string with the second.
In my case I put the command in double quotation marks becauase I am using it in a Bash script with variables.
Using FreeBSD ed and avoid ed's "no match" error in case there is no include statement in a file to be processed:
teststr='
#include <stdio.h>
#include <stdlib.h>
#include <inttypes.h>
'
# using FreeBSD ed
# to avoid ed's "no match" error, see
# *emphasized text*http://codesnippets.joyent.com/posts/show/11917
cat <<-'EOF' | sed -e 's/^ *//' -e 's/ *$//' | ed -s <(echo "$teststr")
H
,g/# *include/u\
u\
i\
#include "newfile.h"\
.
,p
q
EOF
This might work for you (GNU sed):
sed -si '/#include/{s//& "newfile.h\n&/;:a;$!{n;ba}}' file1 file2 file....
or if memory is not a problem:
sed -si ':a;$!{N;ba};s/#include/& "newfile.h\n&/' file1 file2 file...
If anyone came here to replace a character for the first occurrence in all lines (like myself), use this:
sed '/old/s/old/new/1' file
-bash-4.2$ cat file
123a456a789a
12a34a56
a12
-bash-4.2$ sed '/a/s/a/b/1' file
123b456a789a
12b34a56
b12
By changing 1 to 2 for example, you can replace all the second a's only instead.
The use case can perhaps be that your occurences are spread throughout your file, but you know your only concern is in the first 10, 20 or 100 lines.
Then simply adressing those lines fixes the issue - even if the wording of the OP regards first only.
sed '1,10s/#include/#include "newfile.h"\n#include/'
The following command removes the first occurrence of a string, within a file. It removes the empty line too. It is presented on an xml file, but it would work with any file.
Useful if you work with xml files and you want to remove a tag. In this example it removes the first occurrence of the "isTag" tag.
Command:
sed -e 0,/'<isTag>false<\/isTag>'/{s/'<isTag>false<\/isTag>'//} -e 's/ *$//' -e '/^$/d' source.txt > output.txt
Source file (source.txt)
<xml>
<testdata>
<canUseUpdate>true</canUseUpdate>
<isTag>false</isTag>
<moduleLocations>
<module>esa_jee6</module>
<isTag>false</isTag>
</moduleLocations>
<node>
<isTag>false</isTag>
</node>
</testdata>
</xml>
Result file (output.txt)
<xml>
<testdata>
<canUseUpdate>true</canUseUpdate>
<moduleLocations>
<module>esa_jee6</module>
<isTag>false</isTag>
</moduleLocations>
<node>
<isTag>false</isTag>
</node>
</testdata>
</xml>
ps: it didn't work for me on Solaris SunOS 5.10 (quite old), but it works on Linux 2.6, sed version 4.1.5
Nothing new but perhaps a little more concrete answer: sed -rn '0,/foo(bar).*/ s%%\1%p'
Example: xwininfo -name unity-launcher produces output like:
xwininfo: Window id: 0x2200003 "unity-launcher"
Absolute upper-left X: -2980
Absolute upper-left Y: -198
Relative upper-left X: 0
Relative upper-left Y: 0
Width: 2880
Height: 98
Depth: 24
Visual: 0x21
Visual Class: TrueColor
Border width: 0
Class: InputOutput
Colormap: 0x20 (installed)
Bit Gravity State: ForgetGravity
Window Gravity State: NorthWestGravity
Backing Store State: NotUseful
Save Under State: no
Map State: IsViewable
Override Redirect State: no
Corners: +-2980+-198 -2980+-198 -2980-1900 +-2980-1900
-geometry 2880x98+-2980+-198
Extracting window ID with xwininfo -name unity-launcher|sed -rn '0,/^xwininfo: Window id: (0x[0-9a-fA-F]+).*/ s%%\1%p' produces:
0x2200003
POSIXly (also valid in sed), Only one regex used, need memory only for one line (as usual):
sed '/\(#include\).*/!b;//{h;s//\1 "newfile.h"/;G};:1;n;b1'
Explained:
sed '
/\(#include\).*/!b # Only one regex used. On lines not matching
# the text `#include` **yet**,
# branch to end, cause the default print. Re-start.
//{ # On first line matching previous regex.
h # hold the line.
s//\1 "newfile.h"/ # append ` "newfile.h"` to the `#include` matched.
G # append a newline.
} # end of replacement.
:1 # Once **one** replacement got done (the first match)
n # Loop continually reading a line each time
b1 # and printing it by default.
' # end of sed script.
A possible solution here might be to tell the compiler to include the header without it being mentioned in the source files. IN GCC there are these options:
-include file
Process file as if "#include "file"" appeared as the first line of
the primary source file. However, the first directory searched for
file is the preprocessor's working directory instead of the
directory containing the main source file. If not found there, it
is searched for in the remainder of the "#include "..."" search
chain as normal.
If multiple -include options are given, the files are included in
the order they appear on the command line.
-imacros file
Exactly like -include, except that any output produced by scanning
file is thrown away. Macros it defines remain defined. This
allows you to acquire all the macros from a header without also
processing its declarations.
All files specified by -imacros are processed before all files
specified by -include.
Microsoft's compiler has the /FI (forced include) option.
This feature can be handy for some common header, like platform configuration. The Linux kernel's Makefile uses -include for this.
I needed a solution that would work both on GNU and BSD, and I also knew that the first line would never be the one I'd need to update:
sed -e "1,/pattern/s/pattern/replacement/"
Trying the // feature to not repeat the pattern did not work for me, hence needing to repeat it.
I will make a suggestion that is not exactly what the original question asks for, but for those who also want to specifically replace perhaps the second occurrence of a match, or any other specifically enumerated regular expression match. Use a python script, and a for loop, call it from a bash script if needed. Here's what it looked like for me, where I was replacing specific lines containing the string --project:
def replace_models(file_path, pixel_model, obj_model):
# find your file --project matches
pattern = re.compile(r'--project.*')
new_file = ""
with open(file_path, 'r') as f:
match = 1
for line in f:
# Remove line ending before we do replacement
line = line.strip()
# replace first --project line match with pixel
if match == 1:
result = re.sub(pattern, "--project='" + pixel_model + "'", line)
# replace second --project line match with object
elif match == 2:
result = re.sub(pattern, "--project='" + obj_model + "'", line)
else:
result = line
# Check that a substitution was actually made
if result is not line:
# Add a backslash to the replaced line
result += " \\"
print("\nReplaced ", line, " with ", result)
# Increment number of matches found
match += 1
# Add the potentially modified line to our new file
new_file = new_file + result + "\n"
# close file / save output
f.close()
fout = open(file_path, "w")
fout.write(new_file)
fout.close()
sed -e 's/pattern/REPLACEMENT/1' <INPUTFILE
I am on Mac, I want to find a pattern in lines, replace it with something, then append the resulting string to the end of the original line. Here is what I tried:
echo "test='123'" | sed -E '/([^a-z])/ s/$/ \1/'
sed: 1: "/([^a-z])/ s/$/ \1/": \1 not defined in the RE
What do I need to define \1? I thought I did it with ([^a-z]). No?
Edit: Perhaps this code will represent better what I want:
1) echo "test='123'" | sed 's/[a-zA-Z0-9]//g'
2) I want the new line = original line + line #1 above
In other words:
Before (what I get): test='123'
After (what I want): test='123' =''
You can edit this command this way:
echo "test='123'" | sed -E 'h;s/([a-zA-Z0-9])//g;G;s/(.*)\n(.*)/\2\1/'
For readability, the script, line by line, reads
h
s/([a-zA-Z0-9])//g
G
s/(.*)\n(.*)/\2\1/
h stores the current line in the hold space,
your s command does what it does
G appends the content of the hold space, i.e. the original line, to the pattern space, i.e. the current line as you have edited it, putting a newline \n in between.
another s command reorders the two pieces, also removing the \n that the G command inserted.
Comments
Your original attempt sed -E '/([^a-z])/ s/$/ \1/' could not work because \1 refers to what is captured by the leftmost (…) group in the search portion of the s command, it does not "remember" the group(s) you used to address the line.
Once you print the pattern space with p, a newline comes with it, and once it's been printed, there's no way you can remove it within the same sed program.
I have a whole bunch of files, and I wish to change something like this:
My line of text
My other line of text
Into
My line of text\\
My other line of text
Seems simple, but somehow it isn't. I have tried sed s,"\n\n","\\\\\n", as well as tr '\n' '\\' and about 20 other incarnations of these commands.
There must be something going on which I don't understand... but I'm completely lost as to why nothing is working. I've had some comical things happening too, like when cat'ing out the file, it doesn't print newlines, only writes over where the rest was written.
Does anyone know how to accomplish this?
sed works on lines. It fetches a line, applies your code to it, fetches the next line, and so forth. Since lines are treated individually, multiline regexes don't work quite so easily.
In order to use multiline regexes with sed, you have to first assemble the file in the pattern space and then work on it:
sed ':a $!{ N; ba }; s/\n\n/\\\\\n/g' filename
The trick here is the
:a $!{ N; ba }
This works as follows:
:a # jump label for looping
$!{ # if the end of the input has not been reached
N # fetch the next line and append it to what we already have
ba # go to :a
}
Once this is over, the whole file is in the pattern space, and multiline regexes can be applied to it. Of course, this requires that the file is small enough to fit into memory.
sed is line-oriented and so is inappropriate to try to use on problems that span lines. You just need to use a record-oriented tool like awk:
$ awk -v RS='^$' -v ORS= '{gsub(/\n\n/,"\\\\\n")}1' file
My line of text\\
My other line of text
The above uses GNU awk for multi-char RS.
Here is an awk that solve this:
If the the blank lines could contains tabs or spaces, user this:
awk '!NF{a=a"//"} b{print a} {a=$0;b=NF} END {print a}' file
My line of text//
My other line of text
If blank line is just blank with nothing, this should do:
awk '!NF{a=a"//"} a!=""{print a} {a=$0} END {print a}' file
This might work for you (GNU sed):
sed 'N;s|\n$|//|;P;D' file
This keeps 2 lines in the pattern space at any point in time and replaces an empty line by a double slash.
How can I replace a newline ("\n") with a space ("") using the sed command?
I unsuccessfully tried:
sed 's#\n# #g' file
sed 's#^$# #g' file
How do I fix it?
sed is intended to be used on line-based input. Although it can do what you need.
A better option here is to use the tr command as follows:
tr '\n' ' ' < input_filename
or remove the newline characters entirely:
tr -d '\n' < input.txt > output.txt
or if you have the GNU version (with its long options)
tr --delete '\n' < input.txt > output.txt
Use this solution with GNU sed:
sed ':a;N;$!ba;s/\n/ /g' file
This will read the whole file in a loop (':a;N;$!ba), then replaces the newline(s) with a space (s/\n/ /g). Additional substitutions can be simply appended if needed.
Explanation:
sed starts by reading the first line excluding the newline into the pattern space.
Create a label via :a.
Append a newline and next line to the pattern space via N.
If we are before the last line, branch to the created label $!ba ($! means not to do it on the last line. This is necessary to avoid executing N again, which would terminate the script if there is no more input!).
Finally the substitution replaces every newline with a space on the pattern space (which is the whole file).
Here is cross-platform compatible syntax which works with BSD and OS X's sed (as per #Benjie comment):
sed -e ':a' -e 'N' -e '$!ba' -e 's/\n/ /g' file
As you can see, using sed for this otherwise simple problem is problematic. For a simpler and adequate solution see this answer.
Fast answer
sed ':a;N;$!ba;s/\n/ /g' file
:a create a label 'a'
N append the next line to the pattern space
$! if not the last line, ba branch (go to) label 'a'
s substitute, /\n/ regex for new line, / / by a space, /g global match (as many times as it can)
sed will loop through step 1 to 3 until it reach the last line, getting all lines fit in the pattern space where sed will substitute all \n characters
Alternatives
All alternatives, unlike sed will not need to reach the last line to begin the process
with bash, slow
while read line; do printf "%s" "$line "; done < file
with perl, sed-like speed
perl -p -e 's/\n/ /' file
with tr, faster than sed, can replace by one character only
tr '\n' ' ' < file
with paste, tr-like speed, can replace by one character only
paste -s -d ' ' file
with awk, tr-like speed
awk 1 ORS=' ' file
Other alternative like "echo $(< file)" is slow, works only on small files and needs to process the whole file to begin the process.
Long answer from the sed FAQ 5.10
5.10. Why can't I match or delete a newline using the \n escape
sequence? Why can't I match 2 or more lines using \n?
The \n will never match the newline at the end-of-line because the
newline is always stripped off before the line is placed into the
pattern space. To get 2 or more lines into the pattern space, use
the 'N' command or something similar (such as 'H;...;g;').
Sed works like this: sed reads one line at a time, chops off the
terminating newline, puts what is left into the pattern space where
the sed script can address or change it, and when the pattern space
is printed, appends a newline to stdout (or to a file). If the
pattern space is entirely or partially deleted with 'd' or 'D', the
newline is not added in such cases. Thus, scripts like
sed 's/\n//' file # to delete newlines from each line
sed 's/\n/foo\n/' file # to add a word to the end of each line
will NEVER work, because the trailing newline is removed before
the line is put into the pattern space. To perform the above tasks,
use one of these scripts instead:
tr -d '\n' < file # use tr to delete newlines
sed ':a;N;$!ba;s/\n//g' file # GNU sed to delete newlines
sed 's/$/ foo/' file # add "foo" to end of each line
Since versions of sed other than GNU sed have limits to the size of
the pattern buffer, the Unix 'tr' utility is to be preferred here.
If the last line of the file contains a newline, GNU sed will add
that newline to the output but delete all others, whereas tr will
delete all newlines.
To match a block of two or more lines, there are 3 basic choices:
(1) use the 'N' command to add the Next line to the pattern space;
(2) use the 'H' command at least twice to append the current line
to the Hold space, and then retrieve the lines from the hold space
with x, g, or G; or (3) use address ranges (see section 3.3, above)
to match lines between two specified addresses.
Choices (1) and (2) will put an \n into the pattern space, where it
can be addressed as desired ('s/ABC\nXYZ/alphabet/g'). One example
of using 'N' to delete a block of lines appears in section 4.13
("How do I delete a block of specific consecutive lines?"). This
example can be modified by changing the delete command to something
else, like 'p' (print), 'i' (insert), 'c' (change), 'a' (append),
or 's' (substitute).
Choice (3) will not put an \n into the pattern space, but it does
match a block of consecutive lines, so it may be that you don't
even need the \n to find what you're looking for. Since GNU sed
version 3.02.80 now supports this syntax:
sed '/start/,+4d' # to delete "start" plus the next 4 lines,
in addition to the traditional '/from here/,/to there/{...}' range
addresses, it may be possible to avoid the use of \n entirely.
A shorter awk alternative:
awk 1 ORS=' '
Explanation
An awk program is built up of rules which consist of conditional code-blocks, i.e.:
condition { code-block }
If the code-block is omitted, the default is used: { print $0 }. Thus, the 1 is interpreted as a true condition and print $0 is executed for each line.
When awk reads the input it splits it into records based on the value of RS (Record Separator), which by default is a newline, thus awk will by default parse the input line-wise. The splitting also involves stripping off RS from the input record.
Now, when printing a record, ORS (Output Record Separator) is appended to it, default is again a newline. So by changing ORS to a space all newlines are changed to spaces.
GNU sed has an option, -z, for null-separated records (lines). You can just call:
sed -z 's/\n/ /g'
The Perl version works the way you expected.
perl -i -p -e 's/\n//' file
As pointed out in the comments, it's worth noting that this edits in place. -i.bak will give you a backup of the original file before the replacement in case your regular expression isn't as smart as you thought.
Who needs sed? Here is the bash way:
cat test.txt | while read line; do echo -n "$line "; done
In order to replace all newlines with spaces using awk, without reading the whole file into memory:
awk '{printf "%s ", $0}' inputfile
If you want a final newline:
awk '{printf "%s ", $0} END {printf "\n"}' inputfile
You can use a character other than space:
awk '{printf "%s|", $0} END {printf "\n"}' inputfile
tr '\n' ' '
is the command.
Simple and easy to use.
Three things.
tr (or cat, etc.) is absolutely not needed. (GNU) sed and (GNU) awk, when combined, can do 99.9% of any text processing you need.
stream != line based. ed is a line-based editor. sed is not. See sed lecture for more information on the difference. Most people confuse sed to be line-based because it is, by default, not very greedy in its pattern matching for SIMPLE matches - for instance, when doing pattern searching and replacing by one or two characters, it by default only replaces on the first match it finds (unless specified otherwise by the global command). There would not even be a global command if it were line-based rather than STREAM-based, because it would evaluate only lines at a time. Try running ed; you'll notice the difference. ed is pretty useful if you want to iterate over specific lines (such as in a for-loop), but most of the times you'll just want sed.
That being said,
sed -e '{:q;N;s/\n/ /g;t q}' file
works just fine in GNU sed version 4.2.1. The above command will replace all newlines with spaces. It's ugly and a bit cumbersome to type in, but it works just fine. The {}'s can be left out, as they're only included for sanity reasons.
Why didn't I find a simple solution with awk?
awk '{printf $0}' file
printf will print the every line without newlines, if you want to separate the original lines with a space or other:
awk '{printf $0 " "}' file
The answer with the :a label ...
How can I replace a newline (\n) using sed?
... does not work in freebsd 7.2 on the command line:
( echo foo ; echo bar ) | sed ':a;N;$!ba;s/\n/ /g'
sed: 1: ":a;N;$!ba;s/\n/ /g": unused label 'a;N;$!ba;s/\n/ /g'
foo
bar
But does if you put the sed script in a file or use -e to "build" the sed script...
> (echo foo; echo bar) | sed -e :a -e N -e '$!ba' -e 's/\n/ /g'
foo bar
or ...
> cat > x.sed << eof
:a
N
$!ba
s/\n/ /g
eof
> (echo foo; echo bar) | sed -f x.sed
foo bar
Maybe the sed in OS X is similar.
Easy-to-understand Solution
I had this problem. The kicker was that I needed the solution to work on BSD's (Mac OS X) and GNU's (Linux and Cygwin) sed and tr:
$ echo 'foo
bar
baz
foo2
bar2
baz2' \
| tr '\n' '\000' \
| sed 's:\x00\x00.*:\n:g' \
| tr '\000' '\n'
Output:
foo
bar
baz
(has trailing newline)
It works on Linux, OS X, and BSD - even without UTF-8 support or with a crappy terminal.
Use tr to swap the newline with another character.
NULL (\000 or \x00) is nice because it doesn't need UTF-8 support and it's not likely to be used.
Use sed to match the NULL
Use tr to swap back extra newlines if you need them
You can use xargs:
seq 10 | xargs
or
seq 10 | xargs echo -n
cat file | xargs
for the sake of completeness
If you are unfortunate enough to have to deal with Windows line endings, you need to remove the \r and the \n:
tr '\r\n' ' ' < $input > $output
I'm not an expert, but I guess in sed you'd first need to append the next line into the pattern space, bij using "N". From the section "Multiline Pattern Space" in "Advanced sed Commands" of the book sed & awk (Dale Dougherty and Arnold Robbins; O'Reilly 1997; page 107 in the preview):
The multiline Next (N) command creates a multiline pattern space by reading a new line of input and appending it to the contents of the pattern space. The original contents of pattern space and the new input line are separated by a newline. The embedded newline character can be matched in patterns by the escape sequence "\n". In a multiline pattern space, the metacharacter "^" matches the very first character of the pattern space, and not the character(s) following any embedded newline(s). Similarly, "$" matches only the final newline in the pattern space, and not any embedded newline(s). After the Next command is executed, control is then passed to subsequent commands in the script.
From man sed:
[2addr]N
Append the next line of input to the pattern space, using an embedded newline character to separate the appended material from the original contents. Note that the current line number changes.
I've used this to search (multiple) badly formatted log files, in which the search string may be found on an "orphaned" next line.
In response to the "tr" solution above, on Windows (probably using the Gnuwin32 version of tr), the proposed solution:
tr '\n' ' ' < input
was not working for me, it'd either error or actually replace the \n w/ '' for some reason.
Using another feature of tr, the "delete" option -d did work though:
tr -d '\n' < input
or '\r\n' instead of '\n'
I used a hybrid approach to get around the newline thing by using tr to replace newlines with tabs, then replacing tabs with whatever I want. In this case, " " since I'm trying to generate HTML breaks.
echo -e "a\nb\nc\n" |tr '\n' '\t' | sed 's/\t/ <br> /g'`
You can also use this method:
sed 'x;G;1!h;s/\n/ /g;$!d'
Explanation
x - which is used to exchange the data from both space (pattern and hold).
G - which is used to append the data from hold space to pattern space.
h - which is used to copy the pattern space to hold space.
1!h - During first line won't copy pattern space to hold space due to \n is
available in pattern space.
$!d - Clear the pattern space every time before getting the next line until the
the last line.
Flow
When the first line get from the input, an exchange is made, so 1 goes to hold space and \n comes to pattern space, appending the hold space to pattern space, and a substitution is performed and deletes the pattern space.
During the second line, an exchange is made, 2 goes to hold space and 1 comes to the pattern space, G append the hold space into the pattern space, h copy the pattern to it, the substitution is made and deleted. This operation is continued until EOF is reached and prints the exact result.
Bullet-proof solution. Binary-data-safe and POSIX-compliant, but slow.
POSIX sed
requires input according to the
POSIX text file
and
POSIX line
definitions, so NULL-bytes and too long lines are not allowed and each line must end with a newline (including the last line). This makes it hard to use sed for processing arbitrary input data.
The following solution avoids sed and instead converts the input bytes to octal codes and then to bytes again, but intercepts octal code 012 (newline) and outputs the replacement string in place of it. As far as I can tell the solution is POSIX-compliant, so it should work on a wide variety of platforms.
od -A n -t o1 -v | tr ' \t' '\n\n' | grep . |
while read x; do [ "0$x" -eq 012 ] && printf '<br>\n' || printf "\\$x"; done
POSIX reference documentation:
sh,
shell command language,
od,
tr,
grep,
read,
[,
printf.
Both read, [, and printf are built-ins in at least bash, but that is probably not guaranteed by POSIX, so on some platforms it could be that each input byte will start one or more new processes, which will slow things down. Even in bash this solution only reaches about 50 kB/s, so it's not suited for large files.
Tested on Ubuntu (bash, dash, and busybox), FreeBSD, and OpenBSD.
In some situations maybe you can change RS to some other string or character. This way, \n is available for sub/gsub:
$ gawk 'BEGIN {RS="dn" } {gsub("\n"," ") ;print $0 }' file
The power of shell scripting is that if you do not know how to do it in one way you can do it in another way. And many times you have more things to take into account than make a complex solution on a simple problem.
Regarding the thing that gawk is slow... and reads the file into memory, I do not know this, but to me gawk seems to work with one line at the time and is very very fast (not that fast as some of the others, but the time to write and test also counts).
I process MB and even GB of data, and the only limit I found is line size.
Finds and replaces using allowing \n
sed -ie -z 's/Marker\n/# Marker Comment\nMarker\n/g' myfile.txt
Marker
Becomes
# Marker Comment
Marker
You could use xargs — it will replace \n with a space by default.
However, it would have problems if your input has any case of an unterminated quote, e.g. if the quote signs on a given line don't match.
On Mac OS X (using FreeBSD sed):
# replace each newline with a space
printf "a\nb\nc\nd\ne\nf" | sed -E -e :a -e '$!N; s/\n/ /g; ta'
printf "a\nb\nc\nd\ne\nf" | sed -E -e :a -e '$!N; s/\n/ /g' -e ta
To remove empty lines:
sed -n "s/^$//;t;p;"
Using Awk:
awk "BEGIN { o=\"\" } { o=o \" \" \$0 } END { print o; }"
A solution I particularly like is to append all the file in the hold space and replace all newlines at the end of file:
$ (echo foo; echo bar) | sed -n 'H;${x;s/\n//g;p;}'
foobar
However, someone said me the hold space can be finite in some sed implementations.
Replace newlines with any string, and replace the last newline too
The pure tr solutions can only replace with a single character, and the pure sed solutions don't replace the last newline of the input. The following solution fixes these problems, and seems to be safe for binary data (even with a UTF-8 locale):
printf '1\n2\n3\n' |
sed 's/%/%p/g;s/#/%a/g' | tr '\n' # | sed 's/#/<br>/g;s/%a/#/g;s/%p/%/g'
Result:
1<br>2<br>3<br>
It is sed that introduces the new-lines after "normal" substitution. First, it trims the new-line char, then it processes according to your instructions, then it introduces a new-line.
Using sed you can replace "the end" of a line (not the new-line char) after being trimmed, with a string of your choice, for each input line; but, sed will output different lines. For example, suppose you wanted to replace the "end of line" with "===" (more general than a replacing with a single space):
PROMPT~$ cat <<EOF |sed 's/$/===/g'
first line
second line
3rd line
EOF
first line===
second line===
3rd line===
PROMPT~$
To replace the new-line char with the string, you can, inefficiently though, use tr , as pointed before, to replace the newline-chars with a "special char" and then use sed to replace that special char with the string you want.
For example:
PROMPT~$ cat <<EOF | tr '\n' $'\x01'|sed -e 's/\x01/===/g'
first line
second line
3rd line
EOF
first line===second line===3rd line===PROMPT~$