I have read the article recommended by a post on another colormap thread http://www.mathworks.com/matlabcentral/answers/101346 and I understand the concept. I am having trouble understanding the values of CDATA when using the bar(z,'stacked') function.
I have one figure with a major axis plotted using cmap, and I have created and positioned a new axis for the bar chart and I want it to use cmap2.
For example, my code includes:
maps = colormap([cmap;cmap2]);
bH = bar(z,'stacked');
Where z = 25x10 (annual data for 10 years over 25 sites)
Now when I look at the CDATA
get(bH,'CDATA') A cell array is returned of size 1x10 with each cell containing the string 'scaled'.
Now if I look at the CDATA of each of the children
childH = get(bH,'children');
get(childH{i},'CDATA')
A matrix of size 25x10 is returned with every value equal.
e.g. childH{i}'s CDATA is a matrix of size 25x10 having all values = i
So how can I scale these to map to my colormap since
from the documentation above I need to perform:
m = size(colormap,1); % Number of colors in the current colormap
Data = get(H,'CData') % Where H is a handle to a surface or patch object
cmin = min(CData(:)); % Minimum color value
cmax = max(CData(:)); % Maximum color value
idx = min(m,round((m-1)*(CData-cmin)/(cmax-cmin))+1);
idx becomes min(m,nan) which is always m?
I really need help understanding this.
Am I missing something or is this function a special case?
First make sure that cmap2 has exactly the number of colors that you want to use, then get the barseries object to map into it directly. Something like:
childH = get(bH, 'children');
for a = 1:numel(childH)
C = get(childH{a}, 'FaceVertexCData');
C(:) = a+size(cmap, 1);
set(childH{a}, 'FaceVertexCData', C, 'CDataMapping', 'direct');
end
Related
Say that I have a matrix Z with some values, and I want to illustrate it by a plotting the values in Z by height. The first solution comes to mind is a surface, but using surf and similar functions with small matrices doesn't look good.
So I thought about using something like a 3D bar plot with bar3. But the problem is that this function always sets the color by the group and not by height, and I can't get it to do so.
Here is an example:
Z = peaks(5);
subplot 121
surf(Z)
title('Surface look bad')
subplot 122
bar3(Z)
title('The color is not by height')
I tried to look for the color properties in the handles returned by bar3 (like CData and FaceColor) but got lost with all the values and how they relate to the bars themselves.
Ultimately, I would like to have a general solution that for 2 matrices Z and C I can create a 3D bar plot with bars in height given by Z and color given by C.
How can I do so?
The function bar3 returns a surface object, one for each group (i.e. one for each color), so all the bars in one group are essentially plotted as one 'broken' surface. This is explained very good in this answer, so I won't repeat it here.
Instead, I'll get to the solution for this specific problem. The relevant property of the surface is CData. When we create the bar plot, each surface's CData is assigned with a matrix in some size (we'll get to this) that is all equal one value. A different value for each surface. This is how the figure as a whole translates its color map to the color of the groups.
As written above (and elaborated in the linked answer), each group represented by a surface, so it takes a whole matrix to define the color at each point of the surface. The first thing we want to do is to get this matrix size:
Z = peaks(5);
bar_h = bar3(Z);
% we take only the first one, but they are all the same size:
cdata_sz = size(bar_h(1).CData)
cdata_sz =
30 4
CData has always 4 columns (see here why), and the number of rows is always 6*number of groups. This is because it takes 5 vertices to create one closed rectangle with an area object (the last vertex is like the first one) and one line is for spacing between the bars with NaNs, so they will look separated.
Next, we need to enlarge our original colormap (which is the same size of Z) to fit CData in the right way. Essentially, we just want to repeat the same value for all vertices that belong to the same bar. Assuming Z is also our color data (i.e. we color by height) we do:
z_color = repelem(Z,6,4)
Now we need to split our z_color to different cells in the number of our groups. Each cell will contain the coloring data for one surface object:
z_color = mat2cell(z_color,cdata_sz(1),ones(1,size(Z,2))*cdata_sz(2));
And finally, we apply the new color data to the bar plot:
set(bar_h,{'CData'},z_color.')
As a bonus, if we want to remove all zero values from our bar, it can be done easily by setting them to NaN:
Z(abs(Z)<eps) = nan;
C(isnan(Z)) = nan; % if we use a colormap C different from Z
All the above could be boiled down to this handy function:
function bar_h = Cbar3(Z,C,b,y)
% Z - The data
% C - CData (if other then Z values)
% b - Minimum absolute value to keep colored
% y - y-axis values to order the data by
if nargin<2, C = Z; end
if nargin<3 || isempty(b), b = 0; end
Z(abs(Z)<b) = nan;
C(isnan(Z)) = nan;
if nargin<4
bar_h = bar3(Z);
else
bar_h = bar3(y,Z);
end
cdata_sz = size(bar_h(1).CData);
z_color = repelem(C,6,4);
z_color = mat2cell(z_color,...
cdata_sz(1),ones(1,size(Z,2))*cdata_sz(2));
set(bar_h,{'CData'},z_color.')
end
Example of usage:
subplot 121
Z = peaks(30);
Cbar3(Z,Z,0.5);
pbaspect auto
shading flat % just to get a cleaner look
title('Cbar3 using height as color')
subplot 122
Cbar3(Z,rand(size(Z)),0.5);
pbaspect auto
shading flat % just to get a cleaner look
title('Cbar3 using random as color')
Result:
This is a partial answer.
The case of using the bar height as color is covered by the official MATLAB documentation. Essentially the example code boils down to:
function q45423394
hB = bar3(peaks(25)); colorbar;
for indE = 1:numel(hB)
hB(indE).CData = hB(indE).ZData;
end
All you need to do afterwards is make sure that the colormap is the one you want.
While I find EBH's solution aesthetically more pleasing, here there is a simpler solution: interpolation
z = peaks(5);
[x,y]=meshgrid(1:0.1:size(z,1),1:0.1:size(z,2));
zn=interp2(z,x,y,'nearest');
% plot it
surf(zn,'edgecolor','none','facecolor','interp')
This seems like it should be a lot easier than it is...
In matlab 2016b, I want to use a colormap to color the slices of a pie chart.
My data are three element vectors and might contain a zero. I have three colors in my colormap that need to be used in the order of the vector data.
For example:
data = [1 0 1];
my_cols = [1.0000 0.8398 0; 0.8594 0.0781 0.2344; 0.2539 0.4102 0.8789];
labels = {'','',''};
p = pie(data,labels);
p.Patch = my_cols;
I have tried all sorts of ways that have been previously suggested but it seems to not work with version 2016b.
Note that I need the first element of my data to always correspond to the first color in my colormap. I think Matlab colors slices based on size, but I don't want this.
I do not have 16b at hand. The following was done in 17a:
data = [1 0.5 1];
my_cols = [1.0000 0.8398 0; 0.8594 0.0781 0.2344; 0.2539 0.4102 0.8789];
labels = {'','',''};
p = pie(data,labels);
p(1).FaceColor = my_cols(1,:);
p(3).FaceColor = my_cols(2,:);
p(5).FaceColor = my_cols(3,:);
Explanation: pie returns 2 elements for each slice, the patch object and the corresponding string object. You must set the color for the patch objects, i.e. in your case p(1), p(3), and p(5).
Note that I changed your data input. With the zero in the vector you will get a warning and your variable dimensions are off.
I'm trying to draw a set of rectangles, each with a fill color representing some value between 0 and 1. Ideally, I would like to use any standard colormap.
Note that the rectangles are not placed in a nice grid, so using imagesc, surf, or similar seems unpractical. Also, the scatter function does not seem to allow me to assign a custom marker shape. Hence, I'm stuck to plotting a bunch of Rectangles in a for-loop and assigning a FillColor by hand.
What's the most efficient way to compute RGB triplets from the scalar values? I've been unable to find a function along the lines of [r,g,b] = val2rgb(value,colormap). Right now, I've built a function which computes 'jet' values, after inspecting rgbplot(jet). This seems a bit silly. I could, of course, obtain values from an arbitrary colormap by interpolation, but this would be slow for large datasets.
So, what would an efficient [r,g,b] = val2rgb(value,colormap) look like?
You have another way to handle it: Draw your rectangles using patch or fill specifying the color scale value, C, as the third parameter. Then you can add and adjust the colorbar:
x = [1,3,3,1,1];
y = [1,1,2,2,1];
figure
for ii = 1:10
patch(x + 4 * rand(1), y + 2 * rand(1), rand(1), 'EdgeColor', 'none')
end
colorbar
With this output:
I think erfan's patch solution is much more elegant and flexible than my rectangle approach.
Anyway, for those who seek to convert scalars to RGB triplets, I'll add my final thoughts on the issue. My approach to the problem was wrong: colors should be drawn from the closest match in the colormap without interpolation. The solution becomes trivial; I've added some code for those who stumble upon this issue in the future.
% generate some data
x = randn(1,1000);
% pick a range of values that should map to full color scale
c_range = [-1 1];
% pick a colormap
colormap('jet');
% get colormap data
cmap = colormap;
% get the number of rows in the colormap
cmap_size = size(cmap,1);
% translate x values to colormap indices
x_index = ceil( (x - c_range(1)) .* cmap_size ./ (c_range(2) - c_range(1)) );
% limit indices to array bounds
x_index = max(x_index,1);
x_index = min(x_index,cmap_size);
% read rgb values from colormap
x_rgb = cmap(x_index,:);
% plot rgb breakdown of x values; this should fall onto rgbplot(colormap)
hold on;
plot(x,x_rgb(:,1),'ro');
plot(x,x_rgb(:,2),'go');
plot(x,x_rgb(:,3),'bo');
axis([c_range 0 1]);
xlabel('Value');
ylabel('RGB component');
With the following result:
I'm trying to make a color plot in matlab using output data from another program. What I have are 3 vectors indicating the x-position, y-yposition (both in milliarcseconds, since this represents an image of the surroundings of a black hole), and value (which will be assigned a color) of every point in the desired image. I apparently can't use pcolor, because the values which indicate the color of each "pixel" are not in a matrix, and I don't know a way other than meshgrid to create a matrix out of the vectors, which didn't work due to the size of the vectors.
Thanks in advance for any help, I may not be able to reply immediately.
If we make no assumptions about the arrangement of the x,y coordinates (i.e. non-monotonic) and the sparsity of the data samples, the best way to get a nice image out of your vectors is to use TriScatteredInterp. Here is an example:
% samplesToGrid.m
function [vi,xi,yi] = samplesToGrid(x,y,v)
F = TriScatteredInterp(x,y,v);
[yi,xi] = ndgrid(min(y(:)):max(y(:)), min(x(:)):max(x(:)));
vi = F(xi,yi);
Here's an example of taking 500 "pixel" samples on a 100x100 grid and building a full image:
% exampleSparsePeakSamples.m
x = randi(100,[500 1]); y = randi(100,[500 1]);
v = exp(-(x-50).^2/50) .* exp(-(y-50).^2/50) + 1e-2*randn(size(x));
vi = samplesToGrid(x,y,v);
imagesc(vi); axis image
Gordon's answer will work if the coordinates are integer-valued, but the image will be spare.
You can assign your values to a matrix based on the x and y coordinates and then use imagesc (or a similar function).
% Assuming the X and Y coords start at 1
max_x = max(Xcoords);
max_y = max(Ycoords);
data = nan(max_y, max_x); % Note the order of y and x
indexes = sub2ind(size(data), max_y, max_x);
data(indexes) = Values;
imagesc(data); % note that NaN values will be colored with the minimum colormap value
I have to create a map to show how far o how close some values are from a range and give them colors in consequence. Meanwhile, values that are within that range should have another different color.
For example: only the results that are within [-2 2] can be considered valid. For the other values, colors must show how far are from these limits (-3 lighter than -5, darker)
I've tried with colorbar but I'm not able to set up a self-defined color scale.
Any idea??
Thanks in advance!
You need to define a colormap for the range of values you have.
The colormap is N*3 matrix, defining the RGB values of each color.
See the example below, for a range -10:10 and valid values v1,v2:
v1=-3;
v2=+3;
a = -10:10;
graylevels=[...
linspace(0,1,abs(-10-v1)+1) , ...
ones(1, v2-v1-1) , ...
linspace(1,0,abs(10-v2)+1)];
c=repmat(graylevels , [3 1])';
figure;
imagesc(a);
colormap(c);
Here is some code that I just put together to demonstrate a simple means of creating your own lookup table and assigning values from it to the image that you're working with. I'm assuming that your results are in a 2D array and I just used randomly assigned values, but the concept is the same.
I mention the potentila use of HSV as a coloring scheme. Just note that, that requires you to have a m by n by 3 matrix. The top layer is the H - hue, 2nd being the S - saturation and the 3rd being the V or value (light/dark). Simply set the H and S to whatever values you want for the color and vary the V in a similar manner as shown below and you can get the varied light and dark color you want.
% This is just assuming a -10:10 range and randomly generating the values.
randmat = randi(20, 100);
randmat = randmat - 10;
% This should just be a black and white image. Black is negative and white is positive.
figure, imshow(randmat)
% Create your lookup table. This will illustrate having a non-uniform
% acceptable range, for funsies.
vMin = -3;
vMax = 2;
% I'm adding 10 here to account for the negative values since matlab
% doesn't like the negative indicies...
map = zeros(1,20); % initialized
map(vMin+10:vMax+10) = 1; % This will give the light color you want.
%linspace just simply returns a linearly spaced vector between the values
%you give it. The third term is just telling it how many values to return.
map(1:vMin+10) = linspace(0,1,length(map(1:vMin+10)));
map(vMax+10:end) = linspace(1,0,length(map(vMax+10:end)));
% The idea here is to incriment through each position in your results and
% assign the appropriate colorvalue from the map for visualization. You
% can certainly save it to a new matrix if you want to preserve the
% results!
for X = 1:size(randmat,1)
for Y = 1:size(randmat,2)
randmat(X,Y) = map(randmat(X,Y)+10);
end
end
figure, imshow(randmat)