Let me describe the question in this way. I have a .mat file, and if I open it, it contains a 1x10 struct data. In each data, it has a 1x5 struct (or field) called res. In res, it has a 1x1 struct (or field) called, let's say, foo. Thus, I have ixj copies of data(i).res(j).foo .
Is there anyway I can change the name of this foo? say I want all data(i).res(j).foo to become data(i).res(j).bar
I did search on the internet, and tried a few ways (add field and delete, create a temp field, use cell2field or fieldtofile, etc.) and all of them didn't work. The most frequent returned error is "Subscripted Assignment between dissimilar structures."
Please help, thanks in advance!
The safest way is probably by looping over data twice, the first pass creating a new field bar for each subfield like data(i).res(j).bar=data(i).res(j).foo, then the second pass deletes the old fields like data(i).res(j) = rmfield(data(i).res(j),'foo').
Thanks caoy and NotLikeThat. I finally came to an conclusion.
data2 = data
for i=1:10
for j = 1:5
data(i).res(j).bar = data2(i).res(j).foo;
end
data(i).res = rmfield(data(i).res, 'foo');
end
I probably need to removed i, j, and data2 after running this script.
Related
I'm relatively new to matlab and would really appreciate any help.
Currently, I have a function (we'll call it readf) that reads in data from a single ascii file into a struct of multiple fields (we'll call it cdata).
names = cellstr(char('A','B','C','D','E','F','G'));
cdata = readf('filestring','dataNames',names);
The function works fine and gives me the correct output of a struct with these field names, with the value of each field name being a cell array of the corresponding data.
My task is to create a for loop that uses this readf function to read in a folder of these ascii files at once. I'm trying to work it so that the for loop creates a struct with an index of the different cdata structs. After trying a few different methods, I am stumped.
This is what I have so far.
files = struct2cell(dir('folderstring')); %creates a cell array of the names of the files withing the folder
for ii=length(files);
cdata(ii) = readf([folderstring,files(1,1:ii),names],'dataName',names);
end;
This is currently giving me the following error.
"Error using horzcat
Dimensions of matrices being concatenated are not consistent."
I am not sure what is wrong. How can I fix this code so i can read in all the data from a folder at once??? Is there a better and more efficient way to do this than making an index to this struct? Perhaps a cell array of different structures or even a structure of nested structures? Thanks!
Change:
for ii=length(files);
cdata(ii) = readf([folderstring,files(1,1:ii),names],'dataName',names);
end;
To:
for ii=1:length(files); % CHECK to make sure length(files) is giving you the right number
cdata(ii) = readf([folderstring,files{ii},names],'dataName',names);
end;
% CHECK files{ii}, with 1,2,3 etc. is giving you the correct file name.
I have a <850x1> cell called x. Each of the individual structures has a 'Tag' name and 'Data' cell with <7168x1 double> data values.
(i.e.
x{1,1}.Tag = 'Channel1', x{1,1}.Data= <7168x1 double>)
So, I want to go through the x cell, identify the structures with 'Channel1' Tag names and pull out that structure's data. Then, combine the data into a cell called Ch1. Here is my approach so far:
n=1:850
if x{n,1}.Tag == 'Channel1'
Ch1{:,n} = x{n,1}.Data;
end
However, this gives an error: Bad cell reference operation.
Any ideas what may be going wrong?
There are 2 issues here. First, your if statement will compare each entry in the string x{n,1}.Tag to each entry in the string 'Channel1'. If the dimensions are not the same, you will get an error. To fix this, you could use the string compare function, strcmp. The other issue is that you are assigning n to all values between 1 and 850 at once. This is the issue that is producing the actual error you are seeing. Instead, you want to step through each of these values one at a time with a for loop. I would suggest trying the following code:
for n=1:850
if strcmp(x{n,1}.Tag, 'Channel1')
Ch1{:,n} = x{n,1}.Data;
end
end
I have a matlab code which is for printing a cell array to excel. The size of matrix is 50x13.
The row 1 is the column names.
Column 1 is dates and rest columns are numbers.
The dateformat being defined in the code is:
dFormat = struct;
dFormat.Style = struct( 'NumberFormat', '_(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(#_)' );
dFormat.Font = struct( 'Size', 8 );
Can someone please explain me what the dFormat.Style code means ?
Thanks
The first line creates an empty struct (struct with no fields) called dFormat. A structure can contain pretty much anything in one of its fields, including another structure. The second line adds a field called 'Style' to the dFormat struct and sets it equal to another struct with a field called 'NumberFormat'. The 'NumberFormat' field is set equal to that long string of characters. You now have a structure of structures. The third line is similar to the second.
Note that the first line isn't really necessary unless dFormat already exists and it needs to be "zeroed out" as dFormat.Style with create it implicitly. However, using the struct function can make code more readable in some cases as objects use a similar notation for access methods and properties. In other words, all of your code could be replaced with:
dFormat.Style.NumberFormat = '_(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(#_)';
dFormat.Font.Size = 8;
See this video from the MathWorks for more details and this list of helpful structure functions and examples.
#horchler already elaborated on structs, but I imagine you may actually be more interested in the content of this structs Style field.
In case you are solely interested in _(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(#_), that does not really look like something MATLAB related to me.
My best guess is that this code is used to later feed some other program, for examle to build an excel file.
Can somebody please tell if there exists a way to rename a variable in each iteration of a loop in MATLAB?
Actually, I want to save a variable in a loop with a different name incorporating the index of the loop. Thanks.
Based on your comment, I suggest using a cell array. This allows any type of result to be stored by index. For example:
foo=cell(bar,1);
for ii=1:bar
foo{ii}=quux;
end
You can then save foo to retain all your intermediate results. Though the loop index is not baked into the variable name as you want, this offers identical functionality.
Ignoring the question, "why do you need this?", you can use the eval() function:
Example:
for i = 1:3
eval(['val' num2str(i) '=' num2str(i * 10)]);
end
The output is:
val1 =
10
val2 =
20
val3 =
30
Another way, using a struct to save the loop index into the name of the field:
for ii=1:bar
foo.(["var" num2str(ii)]) = quux;
end
This creates a structure with fields like foo.var1, foo.var1 etc. This does what you want without using eval.
I want to create a structure with a variable name in a matlab script. The idea is to extract a part of an input string filled by the user and to create a structure with this name. For example:
CompleteCaseName = input('s');
USER WRITES '2013-06-12_test001_blabla';
CompleteCaseName = '2013-06-12_test001_blabla'
casename(12:18) = struct('x','y','z');
In this example, casename(12:18) gives me the result test001.
I would like to do this to allow me to compare easily two cases by importing the results of each case successively. So I could write, for instance :
plot(test001.x,test001.y,test002.x,test002.y);
The problem is that the line casename(12:18) = struct('x','y','z'); is invalid for Matlab because it makes me change a string to a struct. All the examples I find with struct are based on a definition like
S = struct('x','y','z');
And I can't find a way to make a dynamical name for S based on a string.
I hope someone understood what I write :) I checked on the FAQ and with Google but I wasn't able to find the same problem.
Use a structure with a dynamic field name.
For example,
mydata.(casename(12:18)) = struct;
will give you a struct mydata with a field test001.
You can then later add your x, y, z fields to this.
You can use the fields later either by mydata.test001.x, or by mydata.(casename(12:18)).x.
If at all possible, try to stay away from using eval, as another answer suggests. It makes things very difficult to debug, and the example given there, which directly evals user input:
eval('%s = struct(''x'',''y'',''z'');',casename(12:18));
is even a security risk - what happens if the user types in a string where the selected characters are system(''rm -r /''); a? Something bad, that's what.
As I already commented, the best case scenario is when all your x and y vectors have same length. In this case you can store all data from the different files into 2 matrices and call plot(x,y) to plot each column as a series.
Alternatively, you can use a cell array such that:
c = cell(2,nufiles);
for ii = 1:numfiles
c{1,ii} = import x data from file ii
c{2,ii} = import y data from file ii
end
plot(c{:})
A structure, on the other hand
s.('test001').x = ...
s.('test001').y = ...
Use eval:
eval(sprintf('%s = struct(''x'',''y'',''z'');',casename(12:18)));
Edit: apologies, forgot the sprintf.