I get this error with my query, but I can't figure out what is wrong with it:
Query-specified return tuple has 135 columns but crosstab returns 295.
And here's my query: (The part highlighted in bold returns same number of rows when run separately in pgAdmin.)
SELECT X.*, pi.productcode, pi.productitemdesc, pi.retailsalesprice, cat.productcategorydesc FROM (
SELECT * FROM crosstab (
'SELECT a.productitem AS productitemid, l.locationcode, (CASE WHEN SUM(a.netamount) IS NOT NULL THEN SUM(a.netamount) ELSE 0 END) || ''#'' || (CASE WHEN SUM(a.quantity) IS NOT NULL THEN SUM(a.quantity) ELSE 0 END) AS sales_qty FROM invoiceitem a INNER JOIN invoiceinfo b ON a.invoice = b.invoiceid INNER JOIN locationinfo l ON b.location = l.locationid WHERE b.status !=2 AND l.locationtype = 1 AND l.status = 1 AND TO_CHAR (b.invoicedate, ''YYYY-MM-DD'')>=''2018-03-01'' AND TO_CHAR (b.invoicedate, ''YYYY-MM-DD'')<=''2018-03-03'' GROUP BY a.productitem, l.locationcode ORDER BY a.productitem',
'SELECT l.locationcode FROM locationinfo l INNER JOIN invoiceinfo b ON b.location = l.locationid
WHERE b.status !=2 AND l.locationtype = 1 AND l.status = 1 AND TO_CHAR (b.invoicedate, ''YYYY-MM-DD'')>=''2018-03-01'' AND TO_CHAR (b.invoicedate, ''YYYY-MM-DD'')<=''2018-03-03'' GROUP BY l.locationcode order by l.locationcode')
AS (productitemid int, "0007" text,"BE101" text,"BE1013" text,"BE1014" text,"BE102" text,"BE103" text,"BE1034" text,"BE104" text,"BE1040" text,"BE1043" text,"BE1044" text,"BE1045" text,"BE1046" text,"BE105" text,"BE106" text,"BE107" text,"BE108" text,"BE109" text,"BE110" text,"BE111" text,"BE112" text,"BE123" text,"BE1265" text,"BE1266" text,"BE1271" text,"BE1272" text,"BE1273" text,"BE1274" text,"BE1279" text,"BE1280" text,"BE1281" text,"BE1282" text,"BE1351" text,"BE1400" text,"BE1401" text,"BE1404" text,"BE141" text,"BE142" text,"BE193" text,"BE194" text,"BE2125" text,"BE2126" text,"BE2127" text,"BE2128" text,"BE3001" text,"BE3002" text,"BE3005" text,"BE3006" text,"BE3009" text,"BE3010" text,"BE3031" text,"BE3032" text,"BE3121" text,"BE3122" text,"BE3123" text,"BE3124" text,"BE3127" text,"BE3128" text,"BE3131" text,"BE3132" text,"BE3203" text,"BE3204" text,"BE325" text,"BE3253" text,"BE3254" text,"BE326" text,"BE332" text,"BE3503" text,"BE3504" text,"BE355" text,"BE356" text,"BE365" text,"BE366" text,"BE381" text,"BE382" text,"BE383" text,"BE384" text,"BE400" text,"BE401" text,"BE402" text,"BE403" text,"BE405" text,"BE406" text,"BE408" text,"BE409" text,"BE411" text,"BE412" text,"BE4311" text,"BE4316" text,"BE4401" text,"BE4402" text,"BE4521" text,"BE4522" text,"BE4551" text,"BE4552" text,"BE470" text,"BE473" text,"BE475" text,"BE481" text,"BE482" text,"BE601" text,"BE604" text,"BE609" text,"BE610" text,"BE7040" text,"BE7043" text,"BE7045" text,"BE7046" text,"BE7048" text,"BE7049" text,"BE708" text,"BE7111" text,"BE7112" text,"BE7127" text,"BE7128" text,"BE7217" text,"BE7218" text,"BE7307" text,"BE7308" text,"BE7351" text,"BE7352" text,"BE801" text,"BE802" text,"BE803" text,"BE804" text,"BE831" text,"BE832" text,"BE860" text,"BE861" text,"BE862" text,"BE863" text,"BE865" text,"BE981" text,"BE982" text
)) X
LEFT JOIN productitem pi ON X.productitemid = pi.productitemid
LEFT JOIN productcategory cat ON pi.productcategory = cat.productcategoryid
The bold part of
productitemid int, "0007" text,"BE101" text,"BE1013" text,"BE1014" text,"BE102" text,"BE103" text,"BE1034" text,"BE104" text,"BE1040" text,"BE1043" text,"BE1044" text,"BE1045" text,"BE1046" text,"BE105" text,"BE106" text,"BE107" text,"BE108" text,"BE109" text,"BE110" text,"BE111" text,"BE112" text,"BE123" text,"BE1265" text,"BE1266" text,"BE1271" text,"BE1272" text,"BE1273" text,"BE1274" text,"BE1279" text,"BE1280" text,"BE1281" text,"BE1282" text,"BE1351" text,"BE1400" text,"BE1401" text,"BE1404" text,"BE141" text,"BE142" text,"BE193" text,"BE194" text,"BE2125" text,"BE2126" text,"BE2127" text,"BE2128" text,"BE3001" text,"BE3002" text,"BE3005" text,"BE3006" text,"BE3009" text,"BE3010" text,"BE3031" text,"BE3032" text,"BE3121" text,"BE3122" text,"BE3123" text,"BE3124" text,"BE3127" text,"BE3128" text,"BE3131" text,"BE3132" text,"BE3203" text,"BE3204" text,"BE325" text,"BE3253" text,"BE3254" text,"BE326" text,"BE332" text,"BE3503" text,"BE3504" text,"BE355" text,"BE356" text,"BE365" text,"BE366" text,"BE381" text,"BE382" text,"BE383" text,"BE384" text,"BE400" text,"BE401" text,"BE402" text,"BE403" text,"BE405" text,"BE406" text,"BE408" text,"BE409" text,"BE411" text,"BE412" text,"BE4311" text,"BE4316" text,"BE4401" text,"BE4402" text,"BE4521" text,"BE4522" text,"BE4551" text,"BE4552" text,"BE470" text,"BE473" text,"BE475" text,"BE481" text,"BE482" text,"BE601" text,"BE604" text,"BE609" text,"BE610" text,"BE7040" text,"BE7043" text,"BE7045" text,"BE7046" text,"BE7048" text,"BE7049" text,"BE708" text,"BE7111" text,"BE7112" text,"BE7127" text,"BE7128" text,"BE7217" text,"BE7218" text,"BE7307" text,"BE7308" text,"BE7351" text,"BE7352" text,"BE801" text,"BE802" text,"BE803" text,"BE804" text,"BE831" text,"BE832" text,"BE860" text,"BE861" text,"BE862" text,"BE863" text,"BE865" text,"BE981" text,"BE982" text
AND
SELECT l.locationcode FROM locationinfo l INNER JOIN invoiceinfo b ON b.location = l.locationid
WHERE b.status !=2 AND l.locationtype = 1 AND l.status = 1 AND TO_CHAR (b.invoicedate, ''YYYY-MM-DD'')>=''2018-03-01'' AND TO_CHAR (b.invoicedate, ''YYYY-MM-DD'')<=''2018-03-03'' GROUP BY l.locationcode order by l.locationcode
When run seperately, I get 295 results which is correct. However putting it together in the whole query gets the error.
The manual:
The remaining output columns must have the type of the last column of the source_sql query's result, and there must be exactly as many of them as there are rows in the category_sql query's result.
crosstab(text, text) with a dynamic (!) SELECT query as 2nd parameter is very error prone, since the output column list is static. You should also generate the output column list dynamically. Example:
Dynamic alternative to pivot with CASE and GROUP BY
That aside, the different number of rows returned from the same query, may very well be due to a different timezone setting in the two different sessions.
You have the expression TO_CHAR(b.invoicedate, 'YYYY-MM-DD') in your predicates. If b.invoicedate is type timestamptz the result depends on the timezone setting. Consider:
SET timezone = '+10';
SELECT TO_CHAR(timestamptz '2018-04-07 23:30+0', 'YYYY-MM-DD');
to_char
----------
2018-04-08
SET timezone = '-10';
SELECT TO_CHAR(timestamptz '2018-04-07 23:30+0', 'YYYY-MM-DD');
to_char
----------
2018-04-07
Solution
To remove the dependency on the timezone setting, use absolute values.
to_char() is expensive complication in this place to begin with. Drop that and adjust the predicate.
Provide timestamptz values to match your column. This also allows indexes to be used (if applicable).
Return Table Type from A function in PostgreSQL
Use time zone names (not offsets or abbreviations) to avoid more misunderstandings.
Ignoring timezones altogether in Rails and PostgreSQL
Use dollar-quoting to clean up the quote mess.
Insert text with single quotes in PostgreSQL
I suggest this as 2nd parameter:
$$
SELECT l.locationcode
FROM locationinfo l
JOIN invoiceinfo b ON b.location = l.locationid
WHERE b.status <> 2 AND l.locationtype = 1 AND l.status = 1
AND b.invoicedate >= timestamptz '2018-03-01 Europe/Vienna'
AND b.invoicedate < timestamptz '2018-03-04 Europe/Vienna'
GROUP BY 1
ORDER BY 1
$$
Replace Europe/Vienna in my example with the time zone name defining your dates.
Note 2018-03-04 to include all of 2018-03-03 like you intended.
My problem is, when I run the following query in MySQL, it looks like this
Query;
SELECT
CONCAT(b.tarih, '#', CONCAT(b.enlem, ',', b.boylam), '#', b.aldigi_yol) AS IlkMesaiEnlemBoylamImei,
CONCAT(tson.max_tarih, '#', CONCAT(tson.max_enlem, ',', tson.max_boylam), '#', tson.max_aldigi_yol) AS SonMesaiEnlemBoylamImei,
Max(CAST(b.hiz AS UNSIGNED)) As EnYuksekHiz,
TIME_FORMAT(Sec_TO_TIME(TIMESTAMPDIFF(SECOND, (b.tarih), (tson.max_tarih))), '%H:%i') AS DurmaSuresi
FROM
(Select id as max_id, tarih as max_tarih, enlem as max_enlem, boylam as max_boylam, aldigi_yol as max_aldigi_yol from _213gl2015016424 where id in(
SELECT MAX(id)
FROM _213gl2015016424 where (tarih between DATE('2016-11-30 05:45:00') AND Date('2017-01-13 14:19:06')) AND CAST(hiz AS UNSIGNED) > 0
GROUP BY DATE(tarih))
) tson
LEFT JOIN _213gl2015016424 a ON a.id = tson.max_id
LEFT JOIN _213gl2015016424 b ON DATE(b.tarih) = DATE(a.tarih)
WHERE b.tarih is not null And (b.tarih between DATE('2016-11-30 05:45:00') AND Date('2017-01-13 14:19:06')) AND b.hiz > 0
GROUP BY tson.max_tarih
Output is order by date;
Result query
When I try to run a query in PostgreSQL, I get group by mistake.
Query;
SELECT
CONCAT(b.tarih, '#', CONCAT(b.enlem, ',', b.boylam), '#', b.toplamyol) AS IlkMesaiEnlemBoylamImei,
CONCAT(tson.max_tarih, '#', CONCAT(tson.max_enlem, ',', tson.max_boylam), '#', tson.max_toplamyol) AS SonMesaiEnlemBoylamImei,
Max(CAST(b.hiz AS OID)) As EnYuksekHiz,
to_char(to_timestamp((extract(epoch from (tson.max_tarih)) - extract(epoch from (b.tarih)))) - interval '2 hour','HH24:MI') AS DurmaSuresi
FROM
(Select id as max_id, tarih as max_tarih, enlem as max_enlem, boylam as max_boylam, toplamyol as max_toplamyol from _213GL2016008691 where id in(
SELECT MAX(id)
FROM _213GL2016008691 where (tarih between DATE('2018-02-01 03:31:54') AND DATE('2018-03-01 03:31:54')) AND CAST(hiz AS OID) > 0
GROUP BY DATE(tarih))
) tson
LEFT JOIN _213GL2016008691 a ON a.id = tson.max_id
LEFT JOIN _213GL2016008691 b ON DATE(b.tarih) = DATE(a.tarih)
WHERE b.tarih is not null And (b.tarih between DATE('2018-02-12 03:31:54') AND DATE('2018-02-13 03:31:54')) AND b.hiz > 0
GROUP BY tson.max_tarih
Group by error is : To use the aggregate function, you must add the column "b.tarih" to the GROUP BY list.
When I add it I get the same error for another column.I'm waiting for your help.
You are using a feature of MySQL that is not standard SQL and you can also deactivate.
You are grouping by tson.max_tarih in your query. That means that for all rows that share the same value in that field, you will get only one row as a result of that group.
If you have several different values in the rest of the fields (enlem, boylam, etc...) which one are you trying to get in as the result of the query? That's the question that PostgreSQL is asking you.
MySQL is just returning any value for those fields among the rows in the group. PostgreSQL requires you to actually specify it.
Two typical solutions would be grouping by the rest of the fields (b.tarih, b.enlem) or specifying the value those fields to something like MAX(b.tarih), etc.
I am developing a TSQL stored proc using SSMS 2008 and am receiving the above error while generating a CTE. I want to add logic to this SP to return every day, not just the days with data. How do I do this? Here is my SP so far:
ALTER Proc [dbo].[rpt_rd_CensusWithChart]
#program uniqueidentifier = NULL,
#office uniqueidentifier = NULL
AS
DECLARE #a_date datetime
SET #a_date = case when MONTH(GETDATE()) >= 7 THEN '7/1/' + CAST(YEAR(GETDATE()) AS VARCHAR(30))
ELSE '7/1/' + CAST(YEAR(GETDATE())-1 AS VARCHAR(30)) END
if exists (
select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#ENROLLEES')
) DROP TABLE #ENROLLEES;
if exists (
select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#DISCHARGES')
) DROP TABLE #DISCHARGES;
declare #sum_enrollment int
set #sum_enrollment =
(select sum(1)
from enrollment_view A
join enrollment_info_expanded_view C on A.enrollment_id = C.enroll_el_id
where
(#office is NULL OR A.group_profile_id = #office)
AND (#program is NULL OR A.program_info_id = #program)
and (C.pe_end_date IS NULL OR C.pe_end_date > #a_date)
AND C.pe_start_date IS NOT NULL and C.pe_start_date < #a_date)
select
A.program_info_id as [Program code],
A.[program_name],
A.profile_name as Facility,
A.group_profile_id as Facility_code,
A.people_id,
1 as enrollment_id,
C.pe_start_date,
C.pe_end_date,
LEFT(datename(month,(C.pe_start_date)),3) as a_month,
day(C.pe_start_date) as a_day,
#sum_enrollment as sum_enrollment
into #ENROLLEES
from enrollment_view A
join enrollment_info_expanded_view C on A.enrollment_id = C.enroll_el_id
where
(#office is NULL OR A.group_profile_id = #office)
AND (#program is NULL OR A.program_info_id = #program)
and (C.pe_end_date IS NULL OR C.pe_end_date > #a_date)
AND C.pe_start_date IS NOT NULL and C.pe_start_date >= #a_date
;WITH #ENROLLEES AS (
SELECT '7/1/11' AS dt
UNION ALL
SELECT DATEADD(d, 1, pe_start_date) as dt
FROM #ENROLLEES s
WHERE DATEADD(d, 1, pe_start_date) <= '12/1/11')
The most obvious issue (and probably the one that causes the error message too) is the absence of the actual statement to which the last CTE is supposed to pertain. I presume it should be a SELECT statement, one that would combine the result set of the CTE with the data from the #ENROLLEES table.
And that's where another issue emerges.
You see, apart from the fact that a name that starts with a single # is hardly advisable for anything that is not a local temporary table (a CTE is not a table indeed), you've also chosen for your CTE a particular name that already belongs to an existing table (more precisely, to the already mentioned #ENROLLEES temporary table), and the one you are going to pull data from too. You should definitely not use an existing table's name for a CTE, or you will not be able to join it with the CTE due to the name conflict.
It also appears that, based on its code, the last CTE represents an unfinished implementation of the logic you say you want to add to the SP. I can suggest some idea, but before I go on I'd like you to realise that there are actually two different requests in your post. One is about finding the cause of the error message, the other is about code for a new logic. Generally you are probably better off separating such requests into distinct questions, and so you might be in this case as well.
Anyway, here's my suggestion:
build a complete list of dates you want to be accounted for in the result set (that's what the CTE will be used for);
left-join that list with the #ENROLLEES table to pick data for the existing dates and some defaults or NULLs for the non-existing ones.
It might be implemented like this:
… /* all your code up until the last WITH */
;
WITH cte AS (
SELECT CAST('7/1/11' AS date) AS dt
UNION ALL
SELECT DATEADD(d, 1, dt) as dt
FROM cte
WHERE dt < '12/1/11'
)
SELECT
cte.dt,
tmp.[Program code],
tmp.[program_name],
… /* other columns as necessary; you might also consider
enveloping some or all of the "tmp" columns in ISNULLs,
like in
ISNULL(tmp.[Program code], '(none)') AS [Program code]
to provide default values for absent data */
FROM cte
LEFT JOIN #ENROLLEES tmp ON cte.dt = tmp.pe_start_date
;