I've successfully configured ZSS Server on my internal system (Win Server 2008R2 + IIS 7.5), and everything works fine.
Now I'm trying to install the same system on a customer machine; I've done this through the installer (latest version), he has applied the necessary security permissions, the home page of the site is visible, but syncing the db give the 1992 error.
Taking a look at IIS logs, I see that every call with GET /pull result in a 404 error code, subcode 0; there are several consecutive statements like this, all terminating wi9th 404.0 error code.
The web.config is the same as my system. What else can I check ?
You say you can reach the home page of the site - do you mean the "main" IIS home page, or the root of the ZSS site? That is, assuming Zumero is running on port 8080, what do you see when you point a browser at http://your.customer.site:8080?
I my case it was caused by the Application pool being configured for 32 bit (which it should not be). Version 1.4 has an improved installer, that should prevent this from happening
Related
I'm trying to deploy an application via web deploy to a windows 2012 r2 server.
First tried installing iis, web deploy using the msi. After getting an unreachable error I saw somewhere that I needed wmsvc to be installed and installed it via powershell command Install-WindowsFeature Web-Mgmt-Service.
I stopped getting the unreachable error and started getting this error ->
Error: Could not complete the request to remote agent URL 'http://xx.x.xx.xx:8172/MSDEPLOYAGENTSERVICE'.
Error: The operation has timed out
On the server's event viewer under system I get the following error ->
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Any idea of what could be going on? Did I miss something on the installation?
After this I also tried installing everything but without iis and I get the same error.
So, this is really not a PoSH issue.
Maybe you should consider movin gthis question to another forum.
Anyway, you have either real server config issues (this can sometimes mean wipe and rebuild - very ugly option - but if it's a virtual machine and you have a snapshot, just roll back), or an app causing this.
Typically for Schannel type of error, it has to do with application or service in machine not able to complete any SSL connection sort of connection.
The error state parameter of 1203 means client error connecting to server, ie invalid ClientHello from the client
See if you can collect more data by...
https://support.microsoft.com/en-us/help/260729/how-to-enable-schannel-event-logging-in-iis
I realized this is an old question, but in case somebody ran into the same issue, here are my solution.
I had to follow this guidelines : https://learn.microsoft.com/en-us/aspnet/web-forms/overview/deployment/configuring-server-environments-for-web-deployment/configuring-a-web-server-for-web-deploy-publishing-web-deploy-handler
Copy the resulting publishsetting file. In the Publish/Profile page import it.
In the Publish/Connection page, change the server to the server address with the 8172 port. Add the password. Change the Destination URL to the site to go to after the publish is completed.
Then after Validate connection was completed, go ahead and publish it!
I have set up AEM 6.3 on remote Linux machine. But when I try to access the AEM from browser, it says "Connection has timed out".
I am not getting any error in the error.log file. Also, in stdout.log file, it says "Startup completed".
Also, I checked that port(4502) is not blocked on the server.
When I put command "curl http://localhost:4502/" on the server, I am not getting any error, which makes me assume that the connection is established.
Do I need to do any other configuration or something in order to access it from the browser? I am using http://ip:4502/ in the browser..
Almost certainly a firewall issue, check and check again :)
Look in the AEM Access log (same folder as the other logs you looked in) can you see any requests coming in from your browser? There is no other config required on AEM to access other than starting it up, assuming there is nothing network/firewall related blocking then you should be able to access it.
One of my Drupal websites homepage (just the homepage) is constantly redirecting when the site is visited. Tends to happen randomly. Which I don't understand why it would do this. I talked a bit on the Drupal community and it is said to be a server issue. Not Drupal.
Error 310 (net::ERR_TOO_MANY_REDIRECTS): There were too many redirects.
I don't currently have CPanel access to check the server logs though. I am somewhat fluent in terminal and I have root SSH access to the server.
Where and what commands would I have to run to find and access the logs that could possible help me figure where to start with fixing this? Would they just be located in /var/? What would I be looking for once I get access to the logs, just a steady stream of the duplicated IP address that it keeps being redirected too?
Found out this IS a Drupal Commerce Kickstart core issue.
Found follow errors in php logs:
PHP Warning: Unknown: Input variables exceeded 1000. To increase the limit change max_input_vars in php.ini
PHP Fatal error: Unsupported operand types in public_html/dev/profiles/commerce_kickstart/modules/contrib/search_api_db/service.inc on line 970
Got the redirect loop to stop after increasing the max_input_vars to 9000. I feel it's more of a bandaid fix though. So I'm taking this further into the Commerice Kickstart community.
I have terrible issue with Webtop 6.7 SP1 P12 (I have tried also testing P26) with SSO (kerberos) login into Webtop application.
On the user enviroment Web browser is in version IE 8.0.7601.17514 and operation system is Windows 7.
When I login into application (SSO authentication is succesful) result screen is missing some frame:
Sometimes frames are not behaving like this:
in this case URL is also strangely modified (part of it was deleted).
Java (1.6.0.27) is installed correctly. I also checked security setttings on JAVA and IE, but I don't see any incorrect parameters here.
When I use web browser Firefox 3.5.19 to login into the Webtop (SSO is active too) GUI is loaded correctly with frames..
My another test was under operation system Windows XP, IE 8.0.6001.18702. The Webtop GUI workiing correctly.
When I tried logging into Webtop instead of the hostname by use IP address application server, GUI working correctly. In this case SSO is off.
I tried change verzion JAVA vs IE but nothing helps.
Wireshark network protocol analyze capture this HTTP issue:
this problem occurs on 6 users of total 100.
Please, do you have any ideas for me?
Thank you so much.
Lukas
Investigating further we found that non-working users were part of 100+ AD groups resulting in a large kerberos token size.
I changed tomcat config file "server.xml" to increase http header limit to "maxHttpHeaderSize="16384"".
<Connector port="8080" maxHttpHeaderSize="16384" protocol="HTTP/1.1" ... />
Here is the link to fix:
http://blogs.adobe.com/livecycle/2012/08/avoiding-livecycle-kerberos-based-sso-problems-for-active-directory-users-with-large-group-memberships.html
To whom it may respond to,
We have deployed a web service to Windows 2003 Server SP2 , .net framework 3.5 .
"The service is not running , we are getting the error :
The website declined to show this webpage
HTTP 403
Most likely causes:
•This website requires you to log in.
What you can try:
Go back to the previous page.
More information
This error (HTTP 403 Forbidden) means that Internet Explorer was able to connect to the website, but it does not have permission to view the webpage.
For more information about HTTP errors, see Help."
We have played around with the permissions but the situation didn't change a bit.
We would be very glad ideas on it,
Thank you for your concern,
Best Regards,
Kayhan YUKSEL
Make sure you have aspnet_isapi.dll as your wildcard handler in the Virtual Directory setup. Properties --> Virtual Directory --> Configuration --> Insert... --> aspnet_isapi.dll, make sure you uncheck Verify that file exists.