I am making an AutoHotKey script so that I have media keys on my media key-less keyboard.
All of the shortcuts are working but i want to make one that will set the volume to max, unless it is already, in which case it would set it to 10.
Here is my script as it is:
SoundGet, master_volume
^!Down::SendInput {Media_Play_Pause}
^!Left::SendInput {Media_Prev}
^!Right::SendInput {Media_Next}
^!Up::SendInput {Media_Stop}
^!+Down::SendInput {Volume_Mute}
^!+Left::SendInput {Volume_Down}
^!+Right::SendInput {Volume_Up}
^!+Up::if (%master_volume% = 100) {
SoundSet, 10
} else {
SoundSet, 100
}
But I keep getting the error "Error: The following variable name contains an illegal character: "100.000000"" (the 100.000000 is what my volume is set to, e.g. if it's set to half maximum, it'll read 50.000000) and it highlights "if (%master_volume% = 100)" line ...
I'm pretty new to AutoHotKey, but I have read through a lot of (what I thought were) relevant docs and can't figure it out
The error comes from you using the `%master_volume% the way you are. Consider:
When you do this:
somevariable = george
the value of somevariable is set to "george"
But when you do this:
%somevariable% = george
the variable name is set to "george"
That means when you do this:
%master_volume% = 100
You are taking the value of variable_name and turning it into a variable, too. Effectively, you are trying to create a variable called 100.000000 and assign it the value of 100.
Since the value of master_volume is 100.000000 it is illegal because you can't use . in a variable name.
However, if you used SetFormat, "D", 0, then you would force your decimals not to have any floating point (no .000000) and then you would be able to create a variable out of 100 or 75 or whatever the value of master_volume happens to be.
However, you probably don't want it to work that way. You should use the simple answer proposed by alpha bravo, and just use:
master_volume = 100
this should work
^!+Up::
if (master_volume = 100) {
SoundSet, 10
} else {
SoundSet, 100
}
return
remove %'s around "master_volume"
Related
I have the formula
=IF(AND(HOUR(D2)<=8,HOUR(D2)>=19), "OPEN", "OOH")
This should return the required text values "OPEN" or "OOH" depending if the hour falls within the noted range.
When trying in cell E2 of this sheet https://docs.google.com/spreadsheets/d/1xNFVHLnQGkRgZdLmejCyU0BByOPBY8NMoIYj6SkTFGY/edit#gid=431567503 it returns a text value but not always the correct one. What could be missing from this formula?
I have also tried swapping the range around without success
=IF(AND(HOUR(D2)>=19),HOUR(D2)<=8, "OPEN", "OOH")
Update: also tried with OR instead of AND but it does no better
=IF(OR(HOUR(C3) >=19, HOUR(C3) <=8), "OPEN", "OOH")
if from 8 to 19 = OPEN then use this in E2:
=INDEX(IF((HOUR(C2:C)>=8)*(HOUR(C2:C)<19), "OPEN", "OOH"))
Your conditions are a bit wrong. The IF form is:
=IF(condition, value_if_true, value_if_false)
In your question, you say hour >=19 OR hour <= 8, so you should be using OR, as you do in your update. However, you switched the true and false values in your updated statement. Try:
=IF(OR(HOUR(C3) >=19, HOUR(C3) <=8), "OOH", "OPEN")
With 8:01, this returns "OOH"
With 9:01, this returns "OPEN"
With 18:01, this returns "OPEN"
With 19:01, this returns "OOH"
Logic error. The thing can't be <=8 and >=19 at the same time.
If you reverse the signs to >8 and <19, you might get closer to what you want.
New to reactive programming and pretty lost.
I have a number (which can be positive or negative) coming into a script from a patch in SparkAR and I'd like to add the number to itself once every frame.
ie if the incoming number is 1 and it comes in 9 times the variable would be 9.
let intoScript = Patches.getScalarValue('intoScript').pinLastValue;
let myValue = Reactive.add(myValue, intoScript);
The above doesnt work.
One way-
Increment counter in Patch editor and send variable value to SparkAR.
(https://sparkar.facebook.com/ar-studio/learn/documentation/docs/visual-programming/javascript-to-patch-bridging/)
let originalValue = Reactive.val(0)
function increment(newValue){
Diagnostics.watch('originalValue', originalValue)
originalValue = newValue.add(originalValue)
}
Don't forget to import Reactive module. more info about logical operations here
In AnyLogic Simulation software, I have an agent that has some parameters. I just want that whenever this agent passes from a specific process, say delay, its parameter value to be changed to another value. Moreover, if I have 100 individuals (all same type of agents) passing from this process, I will change the first 40 of these individuals' parameter values to 1, and the last 60's values to 2. Is this possible? Do I need to write codes to these boxes:
Yes, you have to write some code on one of these boxes.
Create an integer variable named v_countand set the initial value to 0. If you want agent's parameters to be changed as soon as they enter the block write this code "On enter" box, else if you want them to be changed when they leave the block write it "On at exit":
if(v_count < 40)
agent.parameter = value1;
else
agent.parameter = value2;
v_count++;
//reset the count to 0 when 100 agents have passed through this block
if(v_count == 100)
v_count = 0;
How would I correctly make a recursive call within every if-statement to get the change of money? Im specifically focusing on the "change" variable.Thanks
TEST CASE 1-------------------------------------------------------------------------------
<>> [change,flag] = makeChangeRecursive(2,100)
change =
50
20
20
5
2
1
flag =
1
My code is the following
function [change,flag] = makeChangeRecursive(cost,paid)
if extra > 0
flag = true;
elseif extra == 0
change = 0;
flag = true;
return
elseif cost > paid;
flag = false;
change = [];
warning('That''s not enough to buy that item.');
return
end
if extra >= 100
change = [change; makeChangeRecursive(cost,paid - change )];
paid =paid-100;
elseif extra >= 50
change = [change; 50];
paid =paid-50;
elseif
This continues for all dollar values.
Let's take a look at your first case:
if extra >= 100
change = [change; makeChangeRecursive(cost,paid - change )];
paid =paid-100;
elseif ...
The first time we call your function, the variable change doesn't have anything in it. In fact, it will never have anything in it at the beginning of the function call because you don't pass it in as a parameter or give it a value prior to this line. So putting change on the right-hand side of the assignment will give you an error.
But that's okay, because that's not what you want to do anyway. You want to build change up from the beginning.
In addition, change is a list of values. We want to pass the recursive calls a single value, paid after updating its value.
Let's build this up step by step:
if extra >= 100
If this is true, we want subtract 100 from the amount paid (what we pass in to the recursive call) and add 100 to our list of change. Let's do the first part:
paid = paid - 100;
As I said, we want to update paid first because we're going to use this value in the recursive call, which happens next, along with adding our new change value to the list:
change = [100; makeChangeRecursive(cost, paid)];
elseif ...
And so on for the remainder of the change values. I'm sure you can take care of the rest of them now by yourself.
I also noticed that you didn't assign a value to extra. This might have been just a cut-and-paste error, but you need to make sure that you have that at the beginning of your function.
I have comp_value that gets values between 1 .. 100.
In addition I have an input variable period (of the same range). I need to cover 2 ranges of comp_values: [1..period] and [period+1 .. 100]. Something like this:
cover some_event_e is {
item period using no_collect;
item comp_val using no_collect,
ranges = {
range([1..period], "Smaller_than_period");
range([period+1..100], "Bigger_than_period");
};
};
(The code causes compilation error since no variable can be written inside range).
Is there a way to collect the coverage?
Thank you for your help.
Ranges must be constant.
But if I understood your intent correctly, you can define new items like
cover some_event_e is {
item smaller_or_equal_than_period: bool = (comp_val in [1..period]) using
ignore = (not smaller_or_equal_than_period);
item greater_than_period: bool = (comp_val in [(min(100,period+1)..100]) using
ignore = (not greater_than_period);
};
Assuming period is always in [1..100].