[root#localhost ~]# service snortd start
Starting snort: /usr/sbin/snort: error while loading shared libraries: libdnet.1: cannot open shared object file: No such file or directory
[FAILED]
But libdnet is installed:
root#localhost ~]# rpm -qa libdnet
libdnet-1.11-1.2.el6.rf.x86_64
I had a similar problem using snort-2.9.6.2-1.centos6.x86_64.rpm downloaded from snort.org.
yum install snort-2.9.6.2-1.centos6.x86_64.rpm would not work because it needed version 1.11-1.2.el6 and the current version is 1.12-6.el6 so I had to download the rpm and from http://pkgs.repoforge.org/libdnet. After installing that my snort would install.
That aside I see you are already using the right version but it still doesn't work. So try this
# find / -name 'libdnet*'
/usr/lib64/libdnet.so.1.0.1
/usr/lib64/libdnet.so.1
# cd /usr/lib64
# ln -s libdnet.so.1.0.1 libdnet.1
Snort should now start assuming everything else such as the conf files are set up ok
Related
i'm trying to install Docker-compose on my Raspberry Pi 3+ which installed Raspbian buster.
I followed instruction on docker.com. After I entered command : sudo curl -L https://github.com/docker/compose/releases/download/1.20.0/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose.
It show a table for downloading
Result
It seems nothing downloaded, just have a file docker-compose saved in /usr/local/bin/docker-compose. When I opened it, it empty. Then I enter command docker-compose -v, it displayed error /usr/local/bin/docker-compose : line 1: Not: command not found.
Anyone have solution?
UPDATE:
Added the following command to my answer to download the LATEST version without specifying any version number at all so the download can be scripted.
curl -L "https://github.com/docker/compose/releases/download/$(curl https://github.com/docker/compose/releases | grep -m1 '<a href="/docker/compose/releases/download/' | grep -o 'v[0-9:].[0-9].[0-9]')/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
It's a bit untidy, but it works. If you have a more elegant way than mine, ping it to me in the comments and I'll update my answer.
Just need to set the perms on the file:
chmod +x /usr/local/bin/docker-compose
Use the file command to validate that you pulled the correct arch for your system.
Intro:
Although docker-compose can be installed from a repo per the accepted answer, apt-cache show docker-compose reveals that as of 20211201 the repo version is only v1.25; about 2 years behind the current v2.1.1 release. In order to take advantage of more modern docker file versions, I needed to get the Github download working.
Short Answer:
The Docker documentation for Docker-Compose is WRONG. They forgot to preface the version number in the command with a "v"; consequently the download fails. Apparently this has been wrong for ages...
Longer Answer:
I ran the below command from the Docker-Compose documentation, and substituted the version "2.1.1" for "1.29.1" per Docker's guidance:
To install a different version of Compose, substitute 1.29.2 with the
version of Compose you want to use.
sudo curl -L "https://github.com/docker/compose/releases/download/2.1.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
The resulting download was 9 KB for a 23 MB binary. Clearly the link was bogus. So I went to the root of the address used in the command "https://github.com/docker/compose/releases" and right-clicked on the version of Docker-Compose that I wanted and chose "Copy Link Address"
This revealed the link Docker was telling folks to use didn't have a "v" prefaced before the version number in the https:// address part of the command.
Solution:
Preface a "v" before the version number you want in the link as below and the command executes successfully:
sudo curl -L "https://github.com/docker/compose/releases/download/v2.1.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
BTW, I too was downloading docker-compose for a Raspberry Pi using the aarch64 binary for Ubuntu 20.04 LTS. However, the missing "v" fix for the broken download address should work for any platform.
This is because on a raspberry pi the url part of the command results in
https://github.com/docker/compose/releases/download/1.24.1/docker-compose-Linux-armv7l
Looking at the latest stable release at https://github.com/docker/compose/releases/tag/1.24.1 you can see there is no download for the armv7l architecture so the file is empty because there is nothing to download.
Will update answer once I figured out how to install docker-compose on Raspian.
Edit:
Via apt-get. Note: Currently (Nov. 8 2019) this installs version 1.21 which is not the latest available.
sudo apt-get install docker-compose
Via pip3. (Installs latest)
sudo apt-get install python3-pip
sudo pip3 install docker-compose
And then restart your system with
sudo shutdown -r
I need install PHP 7.2.0. But the problem is, when i execute apt-get install the last version 7.2.17:
apt install php7.2-fpm php7.2 php7.2-common php7.2-gmp php7.2-curl php7.2-soap php7.2-bcmath php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-mysql php7.2-gd php7.2-xml php7.2-cli php7.2-zip
Theres a easy way to install this specific version?
I'm running a vps with Ubuntu 16
apt-get didnt work for me. The solution was install PHP 7.2.0 from sources.
# curl -O -L https://github.com/php/php-src/archive/php-7.2.0.tar.gz
# tar -zxvf php-7.2.0.tar.gz
# cd php-src-php-7.2.0/
# ./configure --prefix=/usr/local/php --enable-fpm --disable-short-tags --with-openssl --with-pcre-regex --with-pcre-jit --with-zlib --enable-bcmath --with-bz2 --enable-calendar --with-curl --enable-exif
--with-gd --enable-intl --enable-mbstring --with-mysqli --enable-pcntl --with-pdo-mysql --enable-soap --enable-sockets --with-xmlrpc --enable-zip --with-webp-dir --with-jpeg-dir --with-png-dir --with-xls --enable-fpm
# make
# make install
I have created a simple RPM on Fedora27 and it worked fine. It just copied files from tar.gz to /usr/bin/.
When I tried to install this RPM on CentOS I got:
# rpm -i RPMS/x86_64/my_rpm-0.0-5.x86_64.rpm --force
error: Failed dependencies:
libc.so.6(GLIBC_2.26)(64bit) is needed by my_rpm-0.0-5.x86_64
So I assumed I will need to create the RPM on CentOS.
But when I do so I get a weird: 'No such file or directory' that I don't get on Fedora27. Here is a sketch of my spec file:
%define _topdir %(pwd)
%define name my_rpm
%define release 5
%define version 0.0
%define buildroot %{_topdir}/%{name}-%{release}-root
BuildRoot: %{buildroot}
Summary: my_rpm
License: -
Name: %{name}
Release: %{release}
Version: %{version}
Source: %{name}-%{version}-%{release}.tar.gz
Prefix: /usr
Group: Tools
%description
This is my_rpm spec file
%prep
%setup -q -n %(arch)/%{name}-%{version}
%install
install -D my_app -t %{buildroot}/usr/bin/my_rpm/
%files
/usr/bin/my_rpm/*
When I try to build the RPM for it I get:
# rpmbuild -v -bb --clean SPECS/bpf.spec
+ install -D app -t /root/rpmbuild/BUILDROOT/my_rpm-0.0-5.x86_64/usr/bin/my_rpm/
install: failed to access '/root/rpmbuild/BUILDROOT/my_rpm-0.0-5.x86_64/usr/bin/my_rpm/': No such file or directory
The same SPEC exactly runs smoothly on Fedora27.
What should I change in it my spec file so that it would work both on Fedora27 and CentOS7? or maybe I can fix my initial problem with Glibc?
EDIT 1
I added the "mkdir -p ..." command under install and the build was successful but it still gives me the same error, that I need Glibc 2.6.
What I don't understand is why during the build it says:
Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.26)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libc.so.6(GLIBC_2.9)(64bit) libelf.so.1()(64bit) libelf.so.1(ELFUTILS_1.0)(64bit) rtld(GNU_HASH)
Edit 2(solution)
I got it to work. My executables are compiled C code. So I had to re-compile everything on CentOS and then build the rpm. Now it works on both Fedora and CentOS.
I want to install MarkLogic 9 on my ubuntu machine. I tried following steps from this doc
sudo apt-get install alien
sudo alien --to-deb --verbose MarkLogic-9.0-3.1.x86_64.rpm
sudo dpkg -i marklogic_4.1-6_amd64.deb
sudo /etc/init.d/MarkLogic start
But when I tried the second one I got an error like this:
iama#learner:~$ sudo alien --to-deb --verbose MarkLogic-9.0-3.1.x86_64.rpmFile "MarkLogic-9.0-3.1.x86_64.rpm" not found.
I don't know how to proceed further. I just wanted to confirm, is there any official documentation to install MarkLogic 9 in ubuntu?
The error is "File Not Found"
Make sure the rpm file exists in the current directory with read privileges with the name given.
Make sure sudo is not changing to another directory.
To be certain, use an absolute file path.
Then, test with sudo ls -l file..
I went through fair amount of google search to install ack-grep on CentOS but I didn't find anything help. I also looked for the source codes but couldn't find it neither. Does anyone know how to install it on the OS?
Thanks a lot.
Could be essentially the same as https://stackoverflow.com/a/23155007/35946 but on CentOS 6.7 the answer is:
# yum install epel-release
# yum install ack
if you don't have the root permission, you can do as follows:
$ curl https://beyondgrep.com/ack-2.22-single-file > ~/bin/ack && chmod 0755 !#:3
or you can change to root user:
$ sudo su
# curl https://beyondgrep.com/ack-2.22-single-file > /bin/ack && chmod 0755 !#:3
You can get it from the EPEL software repository.
From the EPEL FAQ:
For EL5:
su -c 'rpm -Uvh http://download.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm'
...
su -c 'yum install ack'
For EL6:
su -c 'rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm'
...
su -c 'yum install ack'
Go to Beyond Grep and look at the section titled
Install The ack executeable
curl http://beyondgrep.com/ack-2.14-single-file > ~/bin/ack && chmod 0755 !#:3
And replace ack.2.14 with the current version of ack.
You may need to create the directory mkdir ~/bin/ first. You may
also need to modify ~/.bashrc to include this new path E.G.:
PATH=$PATH:$HOME/bin
Then reload ~/.bashrc
source ~/.bashrc
Test the installation by running ack:
rpm -qa | ack s
This should display any installed packages containing the letter s. (some linux distributions may use ack-grep as the command.
How did you try installing it? Are you using yum? The package is probably not called "ack-grep", but just "ack".
The name "ack-grep" is a Debian-specific thing because there was already a package called "ack", so they called it "ack-grep" instead. That was years ago and now they're dropping the original "ack" package and renaming "ack-grep" to "ack".
For RedHat Enterprise just do sudo yum install ack