I'm trying to set up an IRC server using charbdyis and atheme. Charbdyis installed just fine, but I ran into an error while trying to run $ make install on atheme. It runs and I get the error:
CompileModule: http.so
Install: http.so
/usr/bin/install: ‘http.so’ and ‘/home/nick/atheme/modules/api/http.so’ are the same file
make[2]: *** [install] Error 1
make[1]: *** [install] Error 2
make: *** [install] Error 2
I've tried googling for this problem, but it seems my Google-fu isn't strong enough. Any help or suggestion will be greatly appreciated.
you need to set a different install target to the build location.
When running configure, you can specify --prefix which specifies the install location to place atheme to when running 'make install'.
The same goes for most programs built using autotools.
It is also recommended that you set the prefix to a location within your home directory and run atheme as an unprivileged user, as this is a more secure configuration and root privileges are not required for irc services.
There is more information on ./configure --prefix in the following answered question: Linux configure/make, --prefix?
Related
The specific error is:
11634 verbose node v12.14.1
11635 verbose npm v6.13.4
11636 error Error while executing:
11636 error /home/openbmc/code/openbmc/rpi-build/tmp/hosttools/git ls-remote -h -t https://github.com/novnc/noVNC.git
11636 error
11636 error fatal: unable to access 'https://github.com/novnc/noVNC.git/': error setting certificate verify locations:
11636 error CAfile: /opt/poky/3.1/sysroots/x86_64-pokysdk-linux/etc/ssl/certs/ca-certificates.crt
11636 error CApath: none
Testing manually:
If I run the command manually in a new shell, it fails the same, indicating it is using a default certificate path. If I run it in the shell with the environment for bitbake, it works. This is because GIT_SSL_CAINFO is properly defined.
The behavior suggests that when git is run from hosttools, it is not using the bitbake shell environment, because that environment defines a correct GIT_SSL_CAINFO with a path to the buildtools area with a valid certificate.
I assume that poky is creating a special environment for running hosttools independently from my main shell. If this is the case, there needs to be a way to add GIT_SSL_CAINFO into this environment, which I have no idea how to do.
I poked around other targets looking for clues but could not find anything that suggested to me this variable would be defined.
A search of the tree on GIT_SSL_CAINFO did not turn anything up, but it is possible there is a variable with another name.
perhaps there is a way to set http.sslCAInfo to take the place of GIT_SSL_CAINFO?
The context:
I first compiled up the raspberry pi build and tested that it runs. Then I added in meta-phosphor, which also pulls in webui.
webui has a dependency on noVNC, but with a specific version, which appears to cause this command to run and fail.
How I setup the build:
git clone https://github.com/openbmc/openbmc.git
git checkout cb91a77
# Modify layers to include meta-phosphor and webui
scripts/install-buildtools
. /home/openbmc/code/openbmc/poky/buildtools/environment-setup-x86_64-pokysdk-linux
bitbake bmap-tools-native -caddto_recipe_sysroot
. oe-init-build-env rpi-build (per session)
# Modify conf files in rpi-build
bitbake core-image-base
My work around:
sudo git config --system http.sslcainfo /home/openbmc/code/openbmc/poky/buildtools/sysroots/x86_64-pokysdk-linux/etc/ssl/certs/ca-certificates.crt
I would rather handle the problem in the build, but could not find a way to do so.
Using drush commands to update Drupal 8 Core on a localhost build in MAMP, I've found that drush won't acknowledge my mysql.
From reading a few threads apparently this is due to MAMP's default locations for MYSQL location not being compatible with drush's expectation.
I've followed a few forum suggestions for fixed but so far have not had any luck.
The Latest attempt gives me this permission error:
[warning] The command 'mysql' is required for preflight but cannot be found.
Please install it and retry. Drush Commandline Tool 9.2.3
Other attempts:
I followed the suggestion from March 14th on this thread:
https://github.com/drush-ops/drush/issues/3464
which gave me this error:
[info] Executing: mysql --defaults-file=/private/tmp/drush_iBYWVg --database=drupal20180405 --host=localhost --port=3306 --silent < /private/tmp/drush_7T1mwj [info] Executing: mysql --defaults-file=/private/tmp/drush_bvCyn3 --database=drupal20180405 --host=localhost --port=3306 --silent < /private/tmp/drush_a9aRha In Connection.php line 149: [PDOException (2002)] SQLSTATE[HY000] [2002] No such file or directory
Another potential solution I tried came from Chrisblomm's answer on this thread:
Drush cannot connect to MySQL on MAMP?
Unfortunately for me that triggered the first error again:
[warning] The command 'mysql' is required for preflight but cannot be found.
Please install it and retry. Drush Commandline Tool 9.2.3
UPDATE: I found a solution here:
Andrew Patton's comments on this thread solved it for me:
https://stackoverflow.com/a/29990624/2639928
Specifically his tips to "define and export mysql and mysqladmin as functions".
Once I added his suggested lines of code to to my Mac's local .bash_profile it then allowed drush to correctly identify the mysql.
This meant I was able to use all the drush commands I needed that had previously triggered drush errors.
Andrew Patton's comments here solved it for me:
https://stackoverflow.com/a/29990624/2639928
specifically his tips to "define and export mysql and mysqladmin as functions"
once I added that to my mac / user / .bash_profile my drush acknowledged the mysql and I was able to use all the commands I needed that had previously given me drush errors.
I have the same issue in my php container
[warning] The shell command 'mysql' is required but cannot be found. Please install it and retry.
The mysql client was not installed so to fix it I added mysql client
apt-get install -y default-mysql-client
I have setup a Linux server to run veins/omnet++ simulations on it. The main reason I am doing this is to decrease simulation time. The server is running Ubuntu Server 14.04.3, OMNET++ 4.6, SUMO 0.22.0 and VEINS 4a2. After installing OMNET and SUMO, I changed to VEINS root directory and run ./configure and make MODE=release -j 32. This generated an executable veins-4a2 file that I tried to run as:
./veins-4a2 -u Cmdenv -f examples/veins/omnetpp.ini //since omnetpp.ini is under examples folder
But I got the following error:
Loading NED files from /home/simulator/veins-4a2/examples/veins: 1
<!> Error: NED type `RSUExampleScenario' could not be fully resolved, due to a missing base type or interface.
Before running the previous command I did another ssh into machine to run the command ./sumo-launchd.py -vv -c sumo.
My questions is what does the error refer to? And have I missed any steps during my installation/configuration? Am I doing the make step for veins properly?
For future reference: Specifying the NED Path, or have a look at NED source folder from project properties
I'm getting the following error when trying to install Mojolicious with curl:
mkdir /home/vagrant/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/auto/Mojolicious: Permission denied at /usr/share/perl/5.14/ExtUtils/Install.pm line 494
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make: *** [pure_site_install] Error 13
-> FAIL Installing Mojolicious failed. See /home/vagrant/.cpanm/work/1406757030.29416/build.log for details. Retry with --force to force install it.
The command I'm running is:
sudo curl -L cpanmin.us | perl - Mojolicious
Is there a right way to go about this? I've made a lot of directories permissions to 777 previously as I was getting permission denied errors for other directories before this (/home/vagrant/perl5/bin & /home/vagrant/perl5/lib for example) and not sure if this is the right way to continue solving this issue.
Please advise, thank you
Edit:
After updating to version 5.16 using perlbrew, I got the following when trying to run mojo generate lite_app myapp.pl
It looks like you don't have the Mojolicious framework installed.
Please visit http://mojolicio.us for detailed installation instructions.
I was able to install the mojolicious 5.22 distribution successfully, not sure why I'm getting this error
I am following this guide here
Route-Me Offline Mapping from Database
I am on step 1 where I am installing the app that I will use to capture the maptiles for my ios map.. however I am reciving an error when I execute the last line
make install
generates this error in my console
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/Library/Perl/5.12/Geo/OSM'
mkdir /Library/Perl/5.12/Geo: Permission denied at /System/Library/Perl/5.12/ExtUtils/Install.pm line 494
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make: *** [pure_site_install] Error 13
I am not sure what this error means or how to fix it as I don't normally play around in the console.. but in order to achieve the out come I would like with my app I need some help figuring this out.
Any and all help would be appreciated.
It's a permissions problem. You can give yourself temporary root access using the sudo command (reference).
Try the following:
$ sudo make install