I have a PDF "student record" that we need to print the values on. Because of this, all values must be printed where they are listed on the pdf and I can't just put everything in a list format. I have attached a screenshot of the bottom lefthand corner of the PDF as an example.
Obviously, grouping wouldn't allow me to print out different values of the same record like this. It probably wouldn't allow me top specify which record goes on which line exactly either.
Is it possible to make a formula field that pulls the correct record for each line?
For example, dragging the "Student.Relationship.FirstName" field always lists whatever 'first' relationship is on their record.
Can I make a formula that specifies that will pull the second relationship record instead of defaulting to the first?
Can I make a formula that can specify "student.relationship.firstname" WHERE student.relationship.type = "father"?
SUBREPORTS.. I think that is what you need. Create a grouping on STUDENT, add Extra sections for the same group and on each section insert a different Subreport that has details as required.
Pass the Student ID as the sub-report link.
Related
I have a view that I am using to display some information in Crystal report file. In some cases, view is supposed to return more than 1 record.
By default, in these cases, Crystal report take the last record and display that one. So, if I have two records with id A and B, I will see only the details of B.
I want to have an option where both A and B are displayed separated by comma.
E.g. if EmployeeDepartment in Employee table has two records (CIS, FINANCE) for employee A, then I want to see #EmployeeDepartment return "CIS, FINANCE" instead of just "FINANCE".
I have been trying to find a way to do this. Till now, I have gotten this far:
Base formula
Shared Stringvar store;
store:=store+{TBL_MR_Header.MRHD_Customer_Ref_No}+ ", "
Display formula
Shared Stringvar store;
store
When I run the report, base formula returns "B," instead of "A,B". Display formula on the other hand displays nothing.
I am unsure what I am missing here.
Edit:
I have created a query that returns the two value comma separated, in both records. So, both records display "CIS, FINANCE" instead of "CIS" and "FINANCE" respectively. Now, I have simple problem, how do I put this query in crystal report file? Only option I can find is to use that datasource expert tool but that does not allow updating query.
Edit:
I actually decided to go different route there. I tried putting the base formula in header and display formula in detail section, but that didn't work either. Turns out, one of my colleague tried a trick to solve similar problem. He used the C# code to call a T-SQL query, got the value in CSV format, and passed it as a parameter. It requires an extra trip to database, but it made it easier.
I'm trying to display multiple values for one drive by adding a column for each additional record assigned to a drive. For example, a drive ID is unique but can have multiple promotional incentives assigned to it.
For example, if we go to a university on 1/23/2015, that will a unique event or record in the DriveMaster table, but if we are giving away T-Shirts and Pizza, those two records will be assigned to the drive in the EquipmentDetail table.
In SSRS, I'm trying to create a sub-report that will display the promotional items on one line instead of adding additional lines for each promotional item. See screenshot below.
What I'd like to have happen is have the each drive only account for 1 row, and each promotional item listed in a new column to the right. See mockup in Excel.
Is there a way to handle this? I know there is in Crytal Reports, but I can't figure this out in SSRS. I've tried using a Matrix, but I can't see to get the columns to grow if there are multiple incentives.
I added a column group on the Description field, and it looks like that it is close, but that the grouping will create blank spaces (cells) in it.
Thanks,
You have to set a Column Group for your promotional item in your Matrix.
Hope that helps.
Edit:
It looks like there are some areas that contain no data (because of your groupings)
We can do something like the following:
In your query you can use the 'over'
Select DriveID, PromotionItem, ... ,
ROW_NUMBER() Over(Partition by Select DriveID, PromotionItem, ... Order by PromotionItem)
AS ColumnGroupNumber
Then in the Promotion Item group that you have change the field it groups on to the ColumnGroupNumber (or whatever you are going to call it). Just don't change the field in the detail row, or you will not see the details.
I have used this solution before. I found it here.
I am trying to remove duplicated sections of a report. currently I am using the previous() function to do this however I am finding that this removes all references to the field passed into this function. I still want to retrieve the first section it comes across.
Thanks
In Section expert, choose the right section (Details I do suppose) click the Formula button close to the Suppress field;
Then type (you can drop field name from available fields)
{...yourfield}=previous{...yourfield}
(this mean that this section will be suppressed if some field, i.e. "id" is identical to previous one)
I would be careful doing the previous() I've used this in the past and noticed it sometimes doesn't display any of the repeated data including the original data until I found a way around it.
Instead try using a unique field for the group but also make sure your table relationships(joins) are set up correctly to reflect what data you want to return.
For example (I'm with education) so I deal with learners and qualifications.
If I want to display learner qualifications I would do it as follows:
Relationship - Learner ---> L_Quals
Create a group, grouped by Learner.learnerID
Create another group, grouped by L_Quals.QualRef
Suppress the details section
Now this will display like this:
LearnerID
-Qualref1
-Qualref2
If I was to show the qualifications in the details section and had other tables linked up this could get a little messy with repeating qualrefs and such
Hope this resolves
I've been working on a report that uses subreports to print records.
The problem is: for the same information, there may be several records - i.e.:
There may be several records for the same product if those records differ in one single column. My goal here is to make a Record Selection Formula that says: "if that item is already shown, then don't show it once again."
I've tried to use (shared) variables for this, but can't seem to find the way, because of the evaluation time.
Selection formulas are already being used to apply some filtering criteria. The column that may differ between two ocurrences of the same record is not always the same, so using a simple Selection Formula is not likely to work...
Any suggestions?
Example:
I used the record selection to tell the report:
"Show me all the products according to these criteria (warehouse=parameter1 and category=parameter2 for example)".
But there may be more than one record for the same product of the same category and inside the same warehouse, if one or more fields are different (for example, different price, different lot)
I want not to display those repetitions.
Your approach is wrong... Record Selection Forumula is something that is applied at report level not on the row level or column level.
If you requirement is not to show the records that duplicates then you need to write the supress condition for those, As per your requirement apply supress condition to the rows or columns.
Ok, this might be a weird request, but is it possible to essentially flatten my dataset inside a crystal report?
I have a datatable in C# that was created with a join, so when it hits the report its 2 records. Most of the columns have identical data, with the last few displaying a different address.
Instead of printing the detail section multiple times with mostly similar data, I need to display 1 'record' with the common data printed once, and each records address arranged next it. As in, all the common fields displayed in one area, and then next to that the address fields from the record where 'AddressType = 1', then next to that the address fields where 'AddressType = 2'
Is this a subreport thing? Because even with subreports I can't get it to only print 1 detail section with the data from just the first record.
Is this even possible with crystal? For long drawn out reasons, I can't flatten the data before it gets to the report.
Ok, someone here in the office showed me the way, so I'll put this out there.
Given data with cols A,B,C all common and D,E different across multiple rows, this is how I 'flattened' the dataset in crystal:
Create a group based on col A, and put A,B,C inside that group header - get rid of the details section entirely
Create a subreport in the group header for each row of data, in my case 2 subreports
Inside each subreport, put fields D,E. Important: There are NO links for these subreports!
For each subreport go into the Select Expert and create a condition that shows only 1 particular row of data. This conditional will have the same field for each subreport, but different values. In my case it was AddressType='A', and AddressType='B'
This will produce 1 report, with A,B,C listed once, and D,E listed once for each subreport(once for each row of data)
This was confusing, time consuming, and I hate crystal reports now more than ever.
It would be pretty ugly, but you could add a group for each common field in Group Expert and then display the data for the common fields in the last group header. So if your common fields are field1 through field5, you would create five groups and put all five fields in the group header of field5. Then you would put the unique address fields (call them field field6 through field8) in the details section.
Now the trick is getting everything to line up correctly. You can set "underlay following sections" on the group header for field5; this will cause field1 through field5 to "fall down" into the details section. You just need to make sure that field6 through field8 are all to the right of field1 through field5 so the text does not overlap.
Now, if you want the two address records to print horizontally, I think you will need a subreport with multiple columns for that. But the same principle applies -- just make sure the subreport is to the right of field1 through field5 so the data doesn't overlap.
Have you tried the suppress if duplicated option on each non-address field?
Otherwise, you could group by the common id, put the common fields in that header, and then display the multiple addresses in the details section.
Or, you could remove the addresses from the datasource and use a subreport to fetch this data for each record. This would bypass the join and be the slowest option performance wise, due to having to select the addresses for each record.
Ok, firstly let's see if I understand this right :
You want a report that would be in the format
MainDetails Address(type1)
MainDetails Address(type2)
to instead be in the format
MainDetails Address(type1) Address(type2)
?
Assuming there are only two address types, you can do the following :
1) Group by Main details (whatever the unique entry is
2) Put the address details in the group header next to them, on the right
3) Also put the address details in the details section, but positioned as if they were in the Address(type2) column positions, so it looks like :
GH MainDetails Address
D.......................................Address
4) Next, add a sort to the report on the AddressType field, so that AddressType=1 shows first.
5) Add a conditional suppression formula to the Details section saying {AddressType=1}
6) Using the Section Expert, in the Group Header tick the 'underlay following sections' box
This should work as long as the number of addresses is either 1 or 2.