Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
I have document that contains two pages. At first I have table from top to bottom of page. Second page consists of single unprintable paragraph character. I cannot delete that character. I want to have only one page with table. Is is possible? I tried Ctrl+Shift+Del at last table cell, but it does not work. Software version: 4.1.3.2
This may not be the answer you are looking for:
As per this blog post:
Problem: open office text document with tables ends up with a blank page at the end of the document if the last table fills the previous page. Why? A new line character refuses to be deleted on that last blank page.
Bug #254655
In OpenOffice writer it seems that tables insist on being followed by a new line. This means that you cannot get rid of new line characters between tables. It also means that you cannot get rid of a new line character when it follows a table at the end of a document.
This latter case can mean that you need to reduce the size of the bottom page margin just to make sure then new line character doesn’t get printed on a new page.
What ought to happen is that there should be no new line of text after a table unless you actually want one.
Resolution:
Not a Bug. (Seriously?)
You can click left mouse to the break line at the bottom of the page and delete page break. You can see screenshot bellow
I had the same problem and did the following:
added an empty row to the table
selected the last two rows of the table
separed the table
cancelled the second table (1 row empty table)
went on the following page and pushed the 'backward delete' key
that's it: the last page was no more there!
Related
So I'm making a form in AppSheet that will be filled out by the user of the app. I have a table with questions for the columns. Question 1 contains an EnumList of answers, so the user can select multiple answers. What I want to do is display question 2 only if any of the answers in question 1 were selected. So if none were, then don't show question 2 so the user will answer question 3 next.
On AppSheet
Go to Data
Open the corresponding table
Go to Columns
Click on the Edit button of the column to be hidden
On the Show field, add formula, i.e. ISNOTBLANK([Fruit]) (in this example Fruit is the column name).
Click Done
I think this is a tall order for Libreoffice, my regular processor. The goal is a column of narrative with annotations in one margin when needed and references on the other. The appearance of 5, 10, 15, 20 for line counting would be a welcomed perk.
I'll want the font to change and formatting to change artistically so the features have to be dynamic, not baked in. Columns in Libreoffice just accept overflow from the previous column instead of the same type of column from the previous page - so THIS is the basis of my search. I can do this on only ONE page in Libreoffice.
There are two ways to do this in LibreOffice. The first is to create a single table with one row and three columns. I found this to be the easiest to work with.
However, line numbering does not work for tables. So you may want the second way instead, which is to create 3 frames with Insert -> Frame. Specify to anchor As Character. Then go to Tools -> Line Numbering and mark Lines in text frames.
A related question is at https://ask.libreoffice.org/en/question/55855/how-can-i-get-two-separate-columns-of-text-in-librewriter/.
Closed. This question needs details or clarity. It is not currently accepting answers.
Want to improve this question? Add details and clarify the problem by editing this post.
Closed 4 years ago.
Improve this question
Kindly explain page table entry as according to my understanding total page table size = number of pages *size of each page where number of pages is given in the logical address and offset is the page size. So how page table entry is applicable and when to use?
Page table entry forms a single entry or a row inside a page table. We get to the correct entry of page table using page number of virtual address.
After getting to the correct entry of page table, the entry gives us the correct physical page number or frame number of physical memory and we use the offset to get to the correct byte(in case word = byte) or word.
This means size of page table = number of entries in page table * size of single page table entry.
Number of entries in page table is = 2 to the power of virtual page number as it is in binary.
I had search some relative question which had been asked, but seem not too much my condition.
My problem is simpler to this problem
Table in iTextSharp is not page breaking as desired?
The different between my problem and his is I need header in each extend page.
Currently I put a long table in one of cell, it make me has header in each page, but if the table to long, all table will shift to second page, and first page is empty.
I have tried table.KeepRowsTogether, but the 15 rows stay in second page and rest in third..
I determine what is the length of list. if number of items more than 15 then I separate list into 0 ~ 14 and 15th to the end, keep all content in the same table then there will having header in second page. Case close
I am already using Filemaker Pro 10, I have two questions:
I have a text field in a portal, and whenever I am entering values like "B12C45" in it, it works well, but when the string is longer like "BC12F42, B45z87" it doesn't show whole the strings and omits the letters from it. what Can I do?
My second question is that: I have a portal in a layout, in this portal every row has an id sometimes the id is repeated in other rows but the value of another field called Position is changing. Now I want to have those rows of this portal which have the same id in another layout. I have tried using scripts for it, but scripts don't work well in this case, and they are entering whole the portal in the new layout not the parts I want . How can I write a script which does this?
I will really appreciate any help.
For the first question there are many ways you could display more data in a field and the best one will depend on the particular implementation in your database. There are three main ways to solve this problem: field-size adjustments, text-size adjustments and programming adjustments to dynamically change the text-size.
Field-size adjustments include:
Making the field longer
Using the autosizing aspect of a field so that as the window grows, so does the field
Text-size adjustments include:
Making the font size for that field smaller.
Setting the font style for that field to condensed.
Programatically, though, three things stand out to me as possibilities. I like the third one the best for most of my solutions:
Set the tooltip for the field to "Self" (without the quotes). A user can see the entire contents of the field by hovering the mouse over the field.
In "Define Database" set the field's calculated value to: "TextStyleAdd(self;Condense)" (without the quotes) and make certain that "Do not replace existing value of field" is turned off
Use Conditional formatting to add the Condense style or use a smaller font when the number of the characters in the field gets long.
The steps for using conditional formatting are as follows:
In layout mode select the field and select 'Conditional Formatting...' from the pop-up menu
Add a new condition
Change the condition to 'Formula is'
In the text field enter "Length(Self) > 8" (without the quotes)
Press the "More Formatting..." button
Select "Condense" as the Style from the text
You can add multiple conditions, so you might have "Condense" only for Length(Self) > 8 and another condition for Length(Self) > 16 where you set both "Condense" and reduce the Font Size.
As for your second question, I'm not able to get a picture of what you're trying to do from the question you asked. You might be able do the following in a script:
Go to Related Record [the portal relationship]
Sort Records [by ID]
And then use a summary field (Count of ID) to determine how many of each ID you have.
If you clarified what you were trying to do, gave more information about your tables and table occurrences, we might be able to provide a better answer for this instance.