using this set of instructions to make an OSM tile server (on Ubuntu 14.04).
When I run this sudo -u my_username renderd -f -c /usr/local/etc/renderd.conf the terminal reports renderd: command not found.
Any ideas why this would be? I have everything in the instructions up to this point working and i dont see a note on how exactly to install renderd, its just part of mod_tile. I thought about trying to get around the issues by running the renderd.py file and supplying the file path to my renderd.conf file, but i get more issues as the OSMBright.xml file contains fonts mapnik can't find, despite setting all the font dirs correctly...maybe more on this issues later.
For now I'd be grateful if anyone can shed light on why my install cant find the command renderd
Solved it. The instructions are missing a line after doing the make step for mod_tile, there should be a make renderd command too. That way the binary for renderd is actually generated and will respond
try to find correct path to renderd. like /usr/local/bin/renderd
Related
I am using Neo4j on a remote server (ubuntu 20.4) and would like to stream data from MongoDB to Neo4j. I followed the instructions here. I tried both ways by using the following approaches:
Use the following command:
sudo wget https://github.com/neo4j-contrib/neo4j-apoc-procedures/releases/tag/4.3.0.7/apoc-mongodb-dependencies-4.3.0.7.jar -O /mnt/neo4j/plugins/apoc-mongodb-dependencies-4.3.0.7.jar
Note that the plugins directory has a different path due to mounting. I changed the path in the configuration file accordingly. This should not be causing any problems because I had the same problem before mounting.
Also, I tried to match the same release as the apoc-core file (4.4.0.3) in a separate attempt with no better outcome.
Changing the ownership and read permissions as follows didn't help either:
sudo chown neo4j:neo4j apoc-mongodb-dependencies-4.4.0.3.jar
sudo chmod 755 apoc-mongodb-dependencies-4.4.0.3.jar
Use the following commands:
sudo wget https://repo1.maven.org/maven2/org/mongodb/mongo-java-driver/3.12.11/mongo-java-driver-3.12.11.jar -O /mnt/neo4j/plugins/mongo-java-driver-3.12.11.jar
sudo wget https://repo1.maven.org/maven2/org/mongodb/mongodb-driver/3.12.11/mongodb-driver-3.12.11.jar -O /mnt/neo4j/plugins/mongodb-driver-3.12.11.jar
sudo wget https://repo1.maven.org/maven2/org/mongodb/mongodb-driver-core/4.7.1/mongodb-driver-core-4.7.1.jar -O /mnt/neo4j/plugins/mongodb-driver-core-4.7.1.jar
sudo wget https://repo1.maven.org/maven2/org/mongodb/bson/4.7.1/bson-4.7.1.jar -O /mnt/neo4j/plugins/bson-4.7.1.jar
Note that I used the latest versions. I tried the versions available in the instructions as well with no difference in the outcome.
Now when restarting the neo4j.service, I no longer can access the cypher-shell nor the browser. In the first case, I get "connection refused", while I get a blank page in the browser case. When I check the status, the service is active and running. But I noticed that it is missing a line compared to when I don't have the dependencies.
Starting...
This instance is ServerId{#}
======== Neo4j 4.4.5 ======== (This line is missing with the dependencies downloaded!)
When I delete the dependencies from the plugins directory and restart, everything goes back to normal and functions as expected. One more thing to note is that apoc-core procedures work just fine!
I don't know if I'm doing something wrong here or if there is some sort of underlying problem!
I'm trying to specify a specific CA file for use with a proxy. When I use wget --ca-certificate=file.cer, it works fine. But when I try to put ca_certificate = file.cer in $HOME/.wgetrc, it doesn't work and I get the following error:
Unable to locally verify the issuer's authority.
The docs say that these should both do the same thing, so I don't know what is causing the difference.
I'm on SLES 15 SP1 and using GNU Wget 1.20.3.
According to Wgetrc Location manual
If the environmental variable WGETRC is set, Wget will try to load
that file. Failing that, no further attempts will be made.
If WGETRC is not set, Wget will try to load $HOME/.wgetrc.
So first thing to check is if WGETRC is set. If it is and is other than $HOME/.wgetrc then wget will not load latter.
what is causing the difference.
I am not sure in relation to what is wget looking for files, so I would try using absolute path rather than relative.
I am really struggling to launch logstash as a service on CentOS 7. Since I cannot figure out what or where to set the
-DJava.io.tmpdir= variable (which apparently would solve my issue), I am trying to create a little script to launch the logstash command line on boot.
The following line works manually for me:
sudo /usr/share/logstash/bin/logstash -f /etc/logstash/conf.d
That successfully loads and opens port 5000.
So I am trying to create a boot time script to run that line and start logstash.
My problem is that I think I need the sudo command as it fails to run without it. Does anyone know how I can get this to work?
I have the following files /etc/systemd/system/mylogstash.service:
[Unit]
After=network.target
[Service]
ExecStart=/usr/local/bin/disk-space-check.sh
[Install]
WantedBy=default.target
and also /usr/local/bin/mylogstashstart.sh:
#!/bin/bash
/usr/share/logstash/bin/logstash -f /etc/logstash/conf.d
To make the script executable I have done:
chmod 744 /usr/local/bin/mylogstash.sh
and
chmod 664 /etc/systemd/system/mylogstash.service
It fails to execute as there are insufficient permissions. How do I replicate the Sudo in the script without storing a password and do I even need to?
Can anyone tell me where I have gone wrong please? I'm getting pretty desperate, and no-one likes to see a man desperate...
Thanks,
QR
I'm trying to use this code to pull a bunch of data from the ModelNet data base located at vision.cs.princeton.edu I'm using the already written matlab code from the website itself; however, I'm encountering permissions errors whenever I run the code because wget (which the code uses) is located in a restricted directory in the server. Normally I would just use sudo; however, I can't seem to run sudo matlab as a command. My question is does anybody know a way to remotely run matlab code from a server and somehow give it permissions that sudo normally would give? Also, could someone try ftping to vision.cs.princeton.edu at port 80? For some reason I'm able to connect to that port, but the connection seems to be closed and I can't ping that address either I get 100% package loss.
Thanks
Use urlread instead of wget, this should fix your issues.
I am facing a problem in downloading some documents programmatically.
For example this link
https://www-950.ibm.com/events/wwe/grp/grp019.nsf/vLookupPDFs/Introduction_to_Storwize_V7000_Unified_T3/$file/Introduction_to_Storwize_V7000_Unified_T3.pdf
can be downloaded from browser, but when I try to get it from wget it doesn't work.
I have tried
wget https://www-950.ibm.com/events/wwe/grp/grp004.nsf/vLookupPDFs/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012/\$file/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012.pdf
It gave me this output
--2012-04-18 17:09:42--
https://www-950.ibm.com/events/wwe/grp/grp004.nsf/vLookupPDFs/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012/$file/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012.pdf
Resolving www-950.ibm.com... 216.208.176.98
Connecting to www-950.ibm.com|216.208.176.98|:443... connected.
Unable to establish SSL connection.
Can any one help me solve this problem. Thanks in advance.
Add the --no-check-certificate to your original wget command.
Plus you need to ensure that you are using a proxy.
On Linux:
export http_proxy=http://myproxyserver.com:8080
On Windows:
set http_proxy=http://myproxyserver.com:8080
I also found that on windows, because this is a https request, that in order to make it work, I also had to set https_proxy. So
set https_proxy=http://myproxyserver.com:8080
Obviously, change the proxy settings to suite your particular situation.