I'm trying to specify a specific CA file for use with a proxy. When I use wget --ca-certificate=file.cer, it works fine. But when I try to put ca_certificate = file.cer in $HOME/.wgetrc, it doesn't work and I get the following error:
Unable to locally verify the issuer's authority.
The docs say that these should both do the same thing, so I don't know what is causing the difference.
I'm on SLES 15 SP1 and using GNU Wget 1.20.3.
According to Wgetrc Location manual
If the environmental variable WGETRC is set, Wget will try to load
that file. Failing that, no further attempts will be made.
If WGETRC is not set, Wget will try to load $HOME/.wgetrc.
So first thing to check is if WGETRC is set. If it is and is other than $HOME/.wgetrc then wget will not load latter.
what is causing the difference.
I am not sure in relation to what is wget looking for files, so I would try using absolute path rather than relative.
Related
I am getting the below errors while using cpan command line:
Reading 'C:\Perl64\cpan\sources\modules\02packages.details.txt.gz'
Warning: Your C:\Perl64\cpan\sources\modules\02packages.details.txt.gz does not
contain a Line-Count header.
Please check the validity of the index file by comparing it to more
than one CPAN mirror. I'll continue but problems seem likely to
happen.
CPAN: Time::HiRes loaded ok (v1.9741)
Warning: Your C:\Perl64\cpan\sources\modules\02packages.details.txt.gz does not
contain a Last-Updated header.
Please check the validity of the index file by comparing it to more
than one CPAN mirror. I'll continue but problems seem likely to
happen.
........Could not split line[" return \"DIRECT\";"]
Could not split line[""]
........Could not split line[" return \"DIRECT\";"]
Could not split line[""]
Giving up parsing your C:\Perl64\cpan\sources\modules\02packages.details.txt.gz,
too many errors
I was trying to install cpanm using cpan App::cpanminus command in command prompt.
I am behind a firewall and have configured the pac file in the http_proxy env variable also. I am using ActivePerl.
return "DIRECT"; is something you will often see in a proxy configuration file, so that's what you probably downloaded into 02packages.details.txt.gz before your proxy was set up correctly.
Once you're sure that your proxy is set up correctly, delete this file and run cpan again. Then cpan will download a fresh copy of the package file.
Once you're sure that your proxy is set up correctly ...
cpan has proxy settings that may need to be configured to get this working.
Run o conf /proxy/ from the cpan prompt to see them.
On my work machine, for example, I have the settings
http_proxy [http://proxymachine.mycompany.com:82]
no_proxy [localhost,127.0.0.1,internalsite.mycompany.com]
I'm trying to use this code to pull a bunch of data from the ModelNet data base located at vision.cs.princeton.edu I'm using the already written matlab code from the website itself; however, I'm encountering permissions errors whenever I run the code because wget (which the code uses) is located in a restricted directory in the server. Normally I would just use sudo; however, I can't seem to run sudo matlab as a command. My question is does anybody know a way to remotely run matlab code from a server and somehow give it permissions that sudo normally would give? Also, could someone try ftping to vision.cs.princeton.edu at port 80? For some reason I'm able to connect to that port, but the connection seems to be closed and I can't ping that address either I get 100% package loss.
Thanks
Use urlread instead of wget, this should fix your issues.
using this set of instructions to make an OSM tile server (on Ubuntu 14.04).
When I run this sudo -u my_username renderd -f -c /usr/local/etc/renderd.conf the terminal reports renderd: command not found.
Any ideas why this would be? I have everything in the instructions up to this point working and i dont see a note on how exactly to install renderd, its just part of mod_tile. I thought about trying to get around the issues by running the renderd.py file and supplying the file path to my renderd.conf file, but i get more issues as the OSMBright.xml file contains fonts mapnik can't find, despite setting all the font dirs correctly...maybe more on this issues later.
For now I'd be grateful if anyone can shed light on why my install cant find the command renderd
Solved it. The instructions are missing a line after doing the make step for mod_tile, there should be a make renderd command too. That way the binary for renderd is actually generated and will respond
try to find correct path to renderd. like /usr/local/bin/renderd
Whenever I try to upload an Image larger than 125Kb, I receive Upload HTTP Error. How can I increase this limit so I can upload Hi-res images?
Thank you,
FD
This has nothing to do with Magento and everything to do with your server settings.
You will likely have to bump up post_max_size and upload_max_filesize in your php.ini
Also, if you're running NGINX you may also have to increase client_max_body_size
Please note, however, that settings and restrictions can vary greatly from one hosting environment to the next. If you're not sure how to alter the config files properly or do not have the necessary access to do so - then you may have to contact your hosting provider and ask them to do it for you.
First of all, make sure that you have correct permissions for your media dir using command line:
sudo chmod -R 775 [magento_root]/media
If it doesn't help, try to check your php config:
php -i | egrep 'upload_max_filesize|post_max_size|memory_limit'
If you see the small values there, you, probably, need to change limits by editing these limits in your php.ini file. You can find this file by running the following command
php -i | grep php.ini
Also, do not forget to restart your apache/php servers after some config changes have been made. Usually, you are able to do it by running:
sudo /etc/init.d/apache2 restart
or
sudo service apache2 restart
Also, I noticed that sometimes mod_security might cause such kind of issues. Try to check your [magento_root]/.htaccess file for the following configuration and try to add it if it's absent:
<IfModule mod_security.c>
SecFilterEngine Off
SecFilterScanPOST Off
</IfModule>
And, the last thing: try to upload images from another browser/computer. Magento has flash uploader for product images and we have cases when the flash player caused the similar issues on some computers.
You have to change both post_max_size and upload_max_filesize in the php.ini
And don’t forget to restart your server afterwards.
I am facing a problem in downloading some documents programmatically.
For example this link
https://www-950.ibm.com/events/wwe/grp/grp019.nsf/vLookupPDFs/Introduction_to_Storwize_V7000_Unified_T3/$file/Introduction_to_Storwize_V7000_Unified_T3.pdf
can be downloaded from browser, but when I try to get it from wget it doesn't work.
I have tried
wget https://www-950.ibm.com/events/wwe/grp/grp004.nsf/vLookupPDFs/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012/\$file/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012.pdf
It gave me this output
--2012-04-18 17:09:42--
https://www-950.ibm.com/events/wwe/grp/grp004.nsf/vLookupPDFs/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012/$file/3-Mobile%20Platform%20--%20Truty%20--%20March%208%202012.pdf
Resolving www-950.ibm.com... 216.208.176.98
Connecting to www-950.ibm.com|216.208.176.98|:443... connected.
Unable to establish SSL connection.
Can any one help me solve this problem. Thanks in advance.
Add the --no-check-certificate to your original wget command.
Plus you need to ensure that you are using a proxy.
On Linux:
export http_proxy=http://myproxyserver.com:8080
On Windows:
set http_proxy=http://myproxyserver.com:8080
I also found that on windows, because this is a https request, that in order to make it work, I also had to set https_proxy. So
set https_proxy=http://myproxyserver.com:8080
Obviously, change the proxy settings to suite your particular situation.