I have set up a Liferay Tomcat Server in Eclipse. After the server starts and I go to localhost:8181 (where I configured the server), the page is empty. Also, if I right click the server in Eclipse and select Open Liferay Portal Home, a 404 Page Not Found is displayed.
When I start the server outside Eclipse, with startup.bat, the page loads just fine.
Does anyone have a clue about why this might happen?
This answer assumes you're using Liferay IDE in Eclipse. It might be accurate even if you're not.
Try making your edits in the Eclipse workspace's server.xml file. The workspace should have a Servers folder, with your Tomcat Liferay server underneath it. The path in my workspace is as follows:
eclipse-luna-workspace/Servers/Liferay v6.2 CE Server (Tomcat 7) at localhost-config
Underneath the directory for the server are copies of the Tomcat configuration files, including server.xml. Make your edits to this server.xml file, restart your server in Eclipse, and Eclipse should copy it to the Tomcat instance at startup.
Where you defined Tomcat http port? And in which way Tomcat is configured in Eclipse?
These questions because Eclipse is able (but it's not mandatory) to override Tomcat default configurations.
Just a note: do you try to use Liferay plugin for Eclipse? It can help you to proper configure a Liferay server in Eclipse (and help you for development also).
Related
I'm currently using Eclipse Mars on OS X to build a PHP based application which requires a web server for a form submission. However, upon attempting to add Tomcat 7.0 as a server, the server list is empty (shown below).
I've been following several tutorials for setting up and configuring a Tomcat server and each one says to place the extracted Tomcat folder in the Eclipse workspace directory so they'll be detected when adding them in Eclipse. The Apache Tomcat folder is in the workspace directory but it still isn't being detected. I've tried reinstalling Eclipse and deleting any duplicate files but I keep getting the same result. How can I properly set up and configure an Apache Tomcat server in Eclipse Mars?
You can tell it about the Tomcat installation using the Server Runtime Environments preference page.
If Tomcat isn't already a known server type, you might need to install a few more. The WTP FAQ has instructions.
All of those tutorials are wrong. You do want to download a copy of Tomcat from Apache so it has the expected layout when Eclipse looks for the jars needed to launch it, but there's no reason to actually put it in the workspace.
I am also using Eclipse neon and I faced the same problem and the answer was available in a question Apache Tomcat Not Showing in Eclipse Server Runtime Environments in the same site already posted
Of the Available Answers the below steps Worked for me:
1.Help-->Eclipse Marketplace
2.Type Tomcat in search box and choose the Option JST Server Adapters(Apache Tomcat,...) and click on Install
3.Then complete the Simple installation steps and after installation Eclipse prompts for a restart accept and then you can see the Target Run time updated with Tomcat server
Note:I am using Windows
I'm running Tomcat in Eclipse. I would like to see the Tomcat home page, however it doesn't show up. When I browse http://localhost:8080, then I get a HTTP 404 Page Not Found error.
How is this caused and how can I solve it?
Eclipse does by default not use Tomcat standalone. Instead, it overtakes its sole server engine and uses the workspace as deployment space instead of Tomcat's own /webapps folder. It also creates copies of configuration files like server.xml in the Servers project. It untouches the Tomcat installation. It untouches the Tomcat default homepage (and manager). It untouches existing deployments.
As the Tomcat homepage is not one of Eclipse projects (nor would become one), you won't see it when starting Tomcat from inside Eclipse like that. You would only see Eclipse projects which are deployed to the server by Add/Remove projects. I'm not sure why you need to see the Tomcat homepage as it has no utter value while developing Java EE web projects. But if you are really dead set on seeing it for some unclear reason, then you'd need to tell Eclipse to not only overtake its engine, but instead use the standalone installation at its entirety.
To configure that, double click Tomcat's entry in Servers view to open its configuration and in the Server Locations section, choose the option Use Tomcat installation.
You'll now be able to see Tomcat's homepage.
Again, the benefit is highly questionable. Do note that this way Eclipse will modify the Tomcat installation. So the Tomcat installation may not be reuseable across other IDEs/workspaces. You'd need to create a whole new Tomcat installation.
In eclipse,right click over tomcat server in servier view.
tomcate->properties.click switch location.
Try the following steps once:
1.Remove schoolManagementsystem folder and war file from webapps folder
2.Task Manager--> end the all java process
3.Now execute the command catalina.bat run in command prompt.
Hope this will help you .
I installed tomcat on my ubuntu. When i create a new Dynamic Web Project I choose the tomcat 7 server. When I launch my page it works on localhost:8080/app/page but if I go on localhost:8080 it give me a 404 error.
If i start tomcat server with an external script like /etc/init.d/tomcat start, it works but I cannot launch my app because it says that the port 8080 is already occupied (by the other instance of tomcat).
I'm confused on how set everything, I would start tomcat at boot and link that instance for my apps.
Can you explain how I hato to do?
Open the server configuration in the Servers tab on Eclipse. On "Server Locations", mark "Use Tomcat installation".
EDIT: to be more precise, this will make Eclipse "take control" of your Tomcat folder. So it will not just make a replica on eclipse .metadata and deploy only your apps on it; instead it will be like if you ran bin/startup, but using some of the configuration defined on Servers view. So if you go localhost:8080 you will see the Welcome page, because /ROOT is now started by Eclipse.
So, I am not against "Starting/Stopping" the server from eclipse but to keep it simple, I think you can stop the server from eclipse (Click on windows/showview/Servers and then stop the server). Then I think you should not get an error if you start tomcat again from external script. Then you can right click on your dynamic web project in eclipse and export it as a war file inside tomcat-install--dir/webapps. Where your web application is available (on which context) depends on the web.xml file. If you need further info on this plz let me know.
When I launch my web application from Eclipse Indigo, where does Tomcat 7 store web application folder? It is not located in Tomcat's own webapp folder. Why I can not access Tomcat's default home page (I talk about http://localhost:8080), if it started under Eclipse? If I start tomcat manually (thruogh the startup.bat), I can access http://localhost:8080.
Doubleclick the Tomcat server entry in Servers view and check the Server Locations section. The path is in there and you can also configure in there if Eclipse should use the Tomcat installation instead of the workspace metadata (which is the default setting).
Note that the server must be published with no modules present to make changes. I.e. stop the server, remove all projects and publish the server.
This will also make the Tomcat homepage available.
See also:
Tomcat started in Eclipse but unable to connect to http://localhost:8085/
Per default it will deploy your application in a subfolder of .metadata-folder from your workspace.
I am very new to Tomcat and web development in general and apologize for what may be a very silly question.
Consider 2 situations:
1.
I start Tomcat outside of Eclipse.
I use eclipse to create a war file.
I deploy it via admin console.
All is ok
2.
I start Tomcat via Eclipse
I can't access admin console
http://localhost:8080/manager/html greets me with 404 error
Same page is behaving properly when Tomcat is started outside of Eclipse
Please advise
Why might the issue be?
Why might the issue be?
You need to configure Eclipse to take control of your Tomcat installation. To do so:
double click on the Tomcat Server in the Servers view
under Server Locations, select Use Tomcat installation
This is illustrated on the screenshot below:
Eclipse creates a new Tomcat configuration separate to your Tomcat installation, in the 'Servers' project. This allows Eclipse to deploy webapps without interfering with anything you've done in your installation (via the manager app or by editing config files manually).
You can reconfigure Eclipse so that it uses the config from your Tomcat installation (see Pascal's answer), or to re-enable the manager app - but read the WTP Tomcat FAQ first as there are good reasons for it working the way it does. I don't recall ever needing to do this - the 'Servers' tab in Eclipse lets you deploy/start/stop/debug/configure apps as required.