I am trying to debug multiple devices at once with openocd on eclipse. I have 2x STM32F303 discovery borards, I have set the hla_serial flag to a proper board, but still no luck.
Separate boards are doing ok, but when trying to debug it's Eclipse saying it'came to error in last sequence.
So if anyone had experience with that. Thanks
We can use hla_serial option within openocd 0.9+ ONLY. I'd recommend to download from
GNU ARM Eclipse project or compile yourself.
To obtain hla_serial, the easiest way found after reading the patch that included this option (http://openocd.zylin.com/#/c/2198/), more specific function "string_descriptor_equal", was to provide a wrong serial, so it would print the correct one.
The command below will create file log_with_correct_serial.txt. Switch board config file for the one currently being used.
openocd.exe -d3 -f board/stm32f4discovery.cfg -c "hla_serial wrong_serial" 2>log_with_correct_serial.txt
Opening log_with_correct_serial.txt you will find correct serial in line containing something like
Debug: 229 23 libusb1_common.c:67 string_descriptor_equal(): Device serial number 'xxxxxxxxxxx' doesn't match requested serial 'wrong_serial'
So create a derived config (for example stm32f4discovery-mydevice1.cfg, assuming stm32f4discovery is used) inside folder board on openocd root directory. Use something like Notepad++ to copy serial as it is hex numbers.
# This is an STM32F4 discovery board with a single STM32F407VGT6 chip.
# http://www.st.com/internet/evalboard/product/252419.jsp
# hla_serial thanks to http://wunderkis.de/stlink-serialno/index.html
source [find board/stm32f4discovery.cfg]
hla_serial V?nIpSU)?
Now to open your device you can use the command below to start debugging using ST-Link adapter.
openocd.exe -f board/stm32f4discovery-mydevice1.cfg
In each eclipse project provides a different board config for each project and you are good to go.
Related
I can't get local debug of IoT Edge modules working on VS Code, but part of the problem could be that I don't understand what I'm doing in the steps.
I'm following the Microsoft guide here. Can anyone explain to me when I run the command "Azure IoT Edge: Start IoT Edge Hub Simulator for Single Module" in VS Code, why do I need to pass an "input name"? Why doesn the simulator need to know this. I've got multiple input commands on my edge module and the fact I need to pass it is making me question what the simulator actually does. I want to be able to debug multiple inputs.
Also on the same documentation, I can't see how it defines which module I want to run in the simulator. Am I missing something or is the process confusing?
When you Start the IoT Edge Hub Simulator for a Single Module, you spawn two Docker containers. One is the edgeHub and the other is a testing utility. The testing utility acts as a server that you can send HTTP requests to, the requests specify the input name and the data. You can use this to send messages to various inputs on your module. Just looking at that, I understand why it is confusing to supply the input name to the simulator. But when you inspect the edgeHub container, you'll see the following environment values being passed:
"routes__output=FROM /messages/modules/target/outputs/* INTO BrokeredEndpoint(\"/modules/input/inputs/print\")",
"routes__r1=FROM /messages/modules/input/outputs/input2 INTO BrokeredEndpoint(\"/modules/target/inputs/input2\")",
"routes__r2=FROM /messages/modules/input/outputs/foo INTO BrokeredEndpoint(\"/modules/target/inputs/foo\")",
"routes__r3=FROM /messages/modules/input/outputs/input1 INTO BrokeredEndpoint(\"/modules/target/inputs/input1\")"
Just like on a real device, you need routes to talk to your module. The edgeHub container registers these routes with the values you supplied during the starting of the simulator. That input can be a comma-separated list. So if you are using more inputs, feel free to supply them when you start the simulator. Under the covers, that command runs:
iotedgehubdev start -i "input1,input2,foo"
Note: when I was testing this with the latest VS Code Extension, the first time I ran it, the textbox contained: "input1,input2".
I'm sorry for that stupid question but I really can't find what I need.
I made a code to use a ESP Wrover 32 with PlatformIO/VScode and I need to upload the code to the ESP32 (connected to the computer using USB) but I can't find how to select the right USB port to upload the code.
The error is :
Please specify 'upload_port' for environment or use global
'--upload-port' option.
I tried to use the command lines but nothing works.
How can I upload my code ?
Thanks
To find the USB port: Hit WindowsKey-X, select Device Manager, plug in the device and observe what's listed under Ports (COM & LPT) - the one that just appeared has the port in brackets (COMn).
Then in platformio.ini in your PlatformIo initialised project folder, you specify the port as a line under the platform section (env: square brackets line): upload_port = com9 or whatever you got from Device Manager.
I hope this helps.
I am learning to write character device drivers from the Kernel Module Programming Guide, and used mknod to create a node in /dev to talk to my driver.
However, I cannot find any obvious way to remove it, after checking the manpage and observing that rmnod is a non-existent command.
What is the correct way to reverse the effect of mknod, and safely remove the node created in /dev?
The correct command is just rm :)
A device node created by mknod is just a file that contains a device major and minor number. When you access that file the first time, Linux looks for a driver that advertises that major/minor and loads it. Your driver then handles all I/O with that file.
When you delete a device node, the usual Un*x file behavior aplies: Linux will wait until there are no more references to the file and then it will be deleted from disk.
Your driver doesn't really notice anything of this. Linux does not automatically unload modules. Your driver wil simply no longer receive requests to do anything. But it will be ready in case anybody recreates the device node.
You are probably looking for a function rather than a command. unlink() is the answer. unlink() will remove the file/special file if no process has the file open. If any processes have the file open, then the file will remain until the last file descriptor referring to it is closed. Read more here: http://man7.org/linux/man-pages/man2/unlink.2.html
I am trying to make a 'dual core' RaspberryPi for a project I am working on. I had followed this tutorial by Simon Cox. Unfortunately I could not get the two RasPi to talk to each other. (This was using Hydra as the process manager)
After looking more carefully at the MPICH installers guide, which can be found here, I tried to use the -phrase to pass the passphrase I had created. However I could not find it as part of the hydra commands. So I re-installed with smpd and after many compiling attempts. I configured with:
/configure -prefix=/home/pi/mpich-install --with-pm=smpd --with-pmi=smpd
I also had to install libbsl-dev to get the MD5 that smpd requires. I also exported the path that the commands mpiexec and mpicc are in. After setting the passphrase I copied the image to a second SD card and put it in a second RasPi. I then set up the passphrase using ssh-keygen.
I was able to run the cpi program on the master Pi and the slave Pi individually but when I tried to run multiple processes on both at the same time I got the error
Fatal error in MPI_Init: Other MPI error, error stack:
MPIR_Init``_thread(392).................:
MPID_Init(139)........................: channel initialization failed
MPIDI_CH3_Init(38)....................:
MPID_nem_init(196)....................:
MPIDI_CH3I_Seg_commit(366)............:
MPIU_SHMW_Hnd_deserialize(324)........:
MPIU_SHMW_Seg_open(863)...............:
MPIU_SHMW_Seg_create_attach_templ(637): open failed - No such file or directory
Can someone please suggest how I can either fix this problem or get the RaspberryPis to communicate using MPICH?
Thanks
E.Lee
If anyone else has this problem make sure your hosts don't have the same name!
You can change it by following this tutorial http://raspi.tv/2012/how-to-change-the-name-of-your-raspberry-pi-new-hostname
I am looking for assistance with the proper GDB / OpenOCD initializion and running commands (external tools) to use within Eclipse for flash and RAM debugging, as well as the proper modifications or additions that need to be incorporated in a makefile for flash vs RAM building for this MCU, if this matters of course.
MCU: STM32F103VET6
I am using Eclipse Helios with Zylin Embedded CDT, Yagarto Tools and Bins, OpenOCD 0.4, and have an Olimex ARM-USB-OCD JTAG adapter.
I have already configured the ARM-USB-OCD and added it as an external tool in Eclipse. For initializing OpenOCD I used the following command in Eclipse. The board config file references the stm32 MCU:
openocd -f interface/olimex-arm-usb-ocd-h.cfg -f board/stm32f10x_128k_eval.cfg
When I run this within Eclipse everything appears to be working (GDB Interface, OpenOCD finds the MCU, etc). I can also telnet into OpenOCD and run commands.
So, I am stuck on the next part; initialization and commands for flash and RAM debugging, as well as erasing flash.
I read through several tutorials, and scoured the net, but have not been able to find anything particular to this processor. I am new to this, so I might not be recognizing an equivalent product for an example.
I'm working with the same tool chain to program and debug a STM32F107 board. Following are my observations to get an STM32Fxxx chip programmed and debugged under this toolchain.
Initial Starting Point
So at this point you've got a working OpenOCD to ARM-USB-OCD connection and so you should be all set on that end. Now the work is on getting Eclipse/Zylin/Yagarto GDB combination to properly talk to the STM32Fxxx through the OpenOCD/Olimex connection. One thing to keep in mind is that all the OpenOCD commands to issue are the run mode commands. The configuration scripts and command-line options to invoke the OpenOCD server are configuration mode commands. Once you issue the init command then the server enters run mode which opens up the set of commands you'll need next. You've probably done it somewhere else but I tack on a '-c "init"' option when I call the OpenOCD server like so:
openocd -f /path to scripts/olimex-arm-usb-ocd-h.cfg -f /path to targets/stm32f107.cfg -c "init"
The following commands I issue next are done by the Eclipse Debug Configurations dialogue. Under the Zylin Embedded debug (Native) section, I create a new configuration, give it a name, Project (optional), and absolute path to the binary that I want to program. Under the Debugger tab I set the debugger to Embedded GDB, point to the Yagarto GDB binary path, don't set a GDB command file, set GDB command set to Standard, and the protocol to mi.
The Commands Tab - Connect GDB to OpenOCD
So the next tab is the Commands tab and that's where the meat of the issue lies. You have two spaces Initialize and Run. Not sure exactly what the difference is except to guess that they occur pre- and post-invocation of GDB. Either way I haven't noticed a difference in how my commands are run.
But anyway, following the examples I found on the net, I filled the Initialize box with the following commands:
set remote hardware-breakpoint limit 6
set remote hardware-watchoint-limit 4
target remote localhost:3333
monitor halt
monitor poll
First two lines tell GDB how many breakpoints and watchpoints you have. Open OCD Manual Section 20.3 says GDB can't query for that information so I tell it myself. Next line commands GDB to connect to the remote target at the localhost over port 3333. The last line is a monitor command which tells GDB to pass the command on to the target without taking any action itself. In this case the target is OpenOCD and I'm giving it the command halt. After that I tell OpenOCD to switch to asynchronous mode of operation. As some of the following operations take a while, it's useful not to have OpenOCD block and wait for every operation.
Sidenote #1: If you're ever in doubt about the state of GDB or OpenOCD then you can use the Eclipse debug console to send commands to GDB or OpenOCD (via GDB monitor commands) after invoking this debug configuration.
The Commands Tab - Setting up the User Flash
Next are commands I give in the Run commands section:
monitor flash probe 0
monitor flash protect 0 0 127 off
monitor reset halt
monitor stm32x mass_erase 0
monitor flash write_image STM3210CTest/test_rom.elf
monitor flash protect 0 0 127 on
disconnect
target remote localhost:3333
monitor soft_reset_halt
to be explained in the following sections...
Setting up Access to User Flash Memory
First I issue an OpenOCD query to see if it can find the flash module and report the proper address. If it responds that it found the flash at address 0x08000000 then we're good. The 0 at the end specifies to get information about flash bank 0.
Sidenote #2: The STM32Fxxx part-specific data sheets have a memory map in section 4. Very useful to keep on hand as you work with the chip. Also as everything is accessed as a memory address, you'll come to know this layout like the back of your hand after a little programming time!
So after confirming that the flash has been properly configured we invoke the command to turn off write protection to the flash bank. PM0075 describes everything you need to know about programming the flash memory. What you need to know for this command is the flash bank, starting sector, ending sector, and whether to enable or disable write protection. The flash bank is defined in the configuration files you passed to OpenOCD and was confirmed by the previous command. Since I want to disable protection for the entire flash space I specify sectors 0 to 127. PM0075 explains how I got that number as it refers to how the flash memory is organized into 2KB pages for my (and your) device. My device has 256KB of flash so that means I have 128 pages. Your device has 512KB of flash so you'll have 256 pages. To confirm that your device's write-protection has been disabled properly, you can check the FLASH_WRPR register at address 0x40022020 using the OpenOCD command:
monitor mdw 0x40022020
The resulting word that it prints will be 0xffffffff which means all pages have their write protection disabled. 0x00000000 means all pages have write protection enabled.
Sidenote #3: On the subject of the memory commands, I bricked my chip twice as I was messing with the option bytes at the block starting at address 0x1ffff800. First time I set the read protection on the flash (kind of hard to figure out what your doing if you do that), second time I set the hardware watchdog which prevented me from doing anything afterwards since the watchdog kept firing off! Fixed it by using the OpenOCD memory access commands. Moral of the story is: With great power comes great responsibility.... Or another take is that if I shoot myself in the foot I can still fix things via JTAG.
Sidenote #4: One thing that'll happen if you try to write to protected flash memory is the FLASH_SR:WRPRTERR bit will be set. OpenOCD will report a more user-friendly error message.
Erasing the Flash
So after disabling the write protection, we need to erase the memory that you want to program. I do a mass erase which erases everything, you also have the option to erase by sector or address (I think). Either way you need to erase first before programming as the hardware checks for erasure first before allowing a write to occur. If the FLASH_SR:PGERR bit (0x4002200c) ever gets set during programming then you know you haven't erased that chunk of memory yet.
Sidenote #5: Erasing a bit in flash memory means setting it to 1.
Programming Your Binary
The next two lines after erasure writes the binary image to the flash and reenables the write protection. There isn't much more to say that isn't covered by PM0075. Basically any error that occurs when you issue flash write_image is probably related to the flash protection not being disabled. It's probably NOT OpenOCD though if you're curious you can take enable the debug output and follow what it does.
GDB Debugging
So finally after programming I disconnect GDB from the remote connection and then reconnect it to the target, do a soft-reset, and my GDB is now ready to debug. This last part I just figured out last night as I was trying to figure out why, after programming, GDB wouldn't properly stop at main() after reset. It kept going off into the weeds and blowing up.
My current thinking and from what I read in the OpenOCD and GDB manuals is that the remote connection is, first and foremost, meant to be used between GDB and a target that has already been configured and running. Well I'm using GDB to configure before I run so I think the symbol table or some other important info gets messed up during the programming. The OpenOCD manual says that the server automatically reports the memory and symbols when GDB connects but all that info probably becomes invalid when the chip gets programmed. Disconnecting and reconnecting I think refreshes the info GDB needs to debug properly. So that has led me to create another Debug Configuration, this one just connects and resets the target since I don't necessarily need to program the chip every time I want to use GDB.
Whew! Done! Kind of long but this took me 3 weekends to figure out so isn't too terribly bad I think...
Final sidenote: During my time debugging I found that OpenOCD debug output to be invaluable to me understanding what OpenOCD was doing under the covers. To program a STM32x chip you need to unlock the flash registers, flip the right bits, and can only write a half-word at a time. For a while I was questioning whether OpenOCD was doing this properly but after looking through the OpenOCD debug output and comparing it against what the PM0075 instructions were, I was able to confirm that it did indeed follow the proper steps to do each operation. I also found I was duplicating steps that OpenOCD was already doing so I was able to cut out instructions that weren't helping! So moral of the story: Debug output is your friend!
I struggled getting JLink to work with a STM3240XX and found a statement in the JLink GDB server documentation saying that after loading flash you must issue a "target reset":
"When debugging in flash the stack pointer and the PC are set automatically when the target is reset after the flash download. Without reset after download, the stack pointer and the PC need to be initialized correctly, typically in the .gdbinit file."
When I added a "target reset" in the Run box of the debugger Setup of Eclipse, suddenly everything worked. I did not have this problem with a Kinetis K60.
The document also explains how to manually set the stack pointer and pc directly if you don't want to issue a reset. It may not be the disconnect/connect that solves the problem but the reset.
What i use after the last sentence in the Comannd Tab - 'Run' Commands, is:
symbol-file STM3210CTest/test_rom.elf
thbreak main
continue
The thbreak main sentence is what makes gdb stop at main.