I have a running xterm and I want to get a program to pipe some commands to it. Is this possible? If yes, how could this be done?
Not without help. Someone recently asked a similar question about screen. It turns out that screen can accept commands, as discussed in Run commands in screen after creating one per bash.
So, you could run (a named session of) screen in an xterm and send commands to that.
Related
I have recently changed my MAC and was setting my work environment from scratch. I have noticed that now I have a feature that I've never used before. When I press up arrow up a couple of times iterm basically chooses one of the previously used commands by itself and prompts the window with all the options I have used a specific command with. For instance I recently used ls with flags -lh -ls etc. I would like to get rid off this prompt as I cannot let's say press arrow up a couple of times to look for a different command I've previously used. Screenshot below for some clarification.
enter image description here
I first need to offer the disclaimer that I am barely a novice when it comes to scripting or coding, so I might be doing this all wrong in the first place. I'm running into an issue with a script I had written in powershell a while ago that is used on several hundred computers in my company daily to automate starting a certain app that everyone uses. So far everyone else hasn't had an issue except one machine.
Normally when I run the script, it starts the services and cli for the program which opens in a new window. Then the script, still open behind that, sends all of the key commands to that cli window, pauses for a brief line of user input after which it closes that cli window, does a few other clean up tasks and closes out itself.
The only difference on this one machine that's not working is the script won't pass the keystrokes to the cli window. If I put them in manually including the normal user input, it finishes the rest of the script just fine, but the cli window is just not receiving the keystroke input from the main script.
The only part of the script that send the keystrokes to the cli window is a few lines of this:
[System.Windows.Forms.SendKeys]::SendWait("Text{Enter}")
I have tried using the sleep command before and in between the key commands to make sure it's not going through the keystrokes to early. I've checked and windows had gone through an Update two days ago, but we would've heard about this issue right then if that was it. I'm at a loss for what the issue could be and would apreciate and help, tips, or direction to help figure this one out.
Is the console window the active window when the keys are sent? The documentation for the class you are calling indicates that it sends the keys to the active window. Not only that, but the documentation also seems to indicate that there are some issues that developers have run into when using that class to sends keys. I would try using the autoit powershell module instead. Autoit is its own scripting language which specializes in automating windows processes and being capable of automating interactions with windows forms, but also comes bundled with its own powershell module that I think is exactly what you need, so I would download the portable "zip" package, extract the powershell module from "Autoitx", and that should help you accomplish what you need
PowerShell automation especially when using SendKeys can / is glitchy due to many varying reasons. Can you use SendKeys sure, but you have to know the environment it will be run in and the needed performance details. Hence your futzing/guessing with Sleep.
There are purpose-built tools to help.
Auto HotKey
'PowerShell auto hotkey'
or the UIAutomation tool
'PowerShell automating other applications'
We have a new server running and we got some new programs doing import routines. So far so good... But there is one program that is put into autostart folder. So it doesn't run until admin logs in and it stops if we logout.
I'd like to put this one into a seperate session so it may work without any interaction by simply starting it with the task scheduler at startup. Is this the right way to do this? Is it safe if I log in later and log out?
Many thanks!
Edit: The applications shows as a symbol in the task bar if running, it can be configured by this. Anything I must know about this if I change?
Edit: It is not my application, I cannot rewrite it as a service.
I successfully added the application by using task schelduler on startup. Login and logout will not quit the application but no symbol is shown. Please add details to my side questions and I'll mark your answer as the accepted one.
Edit: Ended up using this one. If I have to configure, I stop the application in task manager and start it again by link. After that I quit the application and restart it by task scheduler manual start.
You need to run your program as a Windows Service. One way of doing it is using the sc.exe program:
> sc create <new_service_name> binPath= "c:\myapp\myapp.exe"
You can read about it here.
You need to separate your application in two.
To allow it to run without a user session, you need a windows service. That should handle all the background stuff. You can then register the service and set it to start when the system starts.
To allow it to have a UI, and show up in the notification area, you need a windows application. This will be in autostart as usual, and will communicate with the service - for example, over named pipes.
While it is still (barely) possible to run an UI application without a user session, it's only maintained for backwards compatibility, and already shows a lot of problems. It will likely be removed altogether in the future, because it breaks quite a few contracts. Do not rely on hacks like this.
I also used the task scheduler to create the application at system startup. It should be noted that if you want to use for mining, you have to disable an option in "settings" where it says that if the application lasts more than three days in a row it will end.
It really works wonderfully!
it is a old question but I recently solved in another way...
(before I was using a scheduled-task for startup but this gave me diverse problems with lots software...)
Some programs also for diverse reasons must be run at a user level... or even inside a specific user session...
So the best way I found was to use a tool like Sysinternal/Autoruns to program the auto-logon to a specific user (it is a registry setting)... and in the startup-folder of that user (or any other "autorun/autolaunch" task)... run a script that first locks the screen... and next runs the other intended programs... that will run under that user profile...
so you can choose a standard user or a administrator... or even launch programs from a standard user in adminsitrator mode...
I hope will help...
This "hack" solved me many problems with startup apps...
I could not get the "sc create" command to work. Instead I manually edited the registry using regedit. I added a new key in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services.
I used the following page to figure out required parameters and their values. Note that the names do not map.
https://learn.microsoft.com/en-us/windows-hardware/drivers/install/inf-addservice-directive
Old question, but for anyone that stumbles here. Use srvany to set the program as a custom service.
Note that when you do this with for example dropbox, googledrive, etc., you will need stop the service, then open the program normally to make changes like password, updates, etc.
below is a well enough intro.
https://www.iceflatline.com/2015/12/run-a-windows-application-as-a-service-with-srvany/
Download the tool kit here
https://www.microsoft.com/en-us/download/details.aspx?id=17657
Convert user application to Service and Register it using Regsvr32 or installutil.exe. It will start the service using SYSTEM user account. Which is a high privilege account.
Note : You can`t run any Window based application. Even a Message only window.
I'd like to configure emacs a little differently when coming in over remote desktop. I can detect the rdp session, but I'd like to automatically run the function that checks when emacs wakes from sleep. I believe Windows issues a PBT_APMRESUMESUSPEND event when awakening because of user activity -- is there a way to hook this from within emacs?
This would be for emacs 24.4 on Windows. Some code or a pointer to the right documentation would be great. I've looked but am not seeing anything -- maybe I'm not looking in the right place. Thanks in advance.
I don't know of any hooks that are triggered in your situation, would it be possible to solve your situation using the input focus hooks?
Specifically, focus-in-hook.
I'm running Console2, which I believe is just an interface to windows cmd
I have a custom batch file that does most of my dirty work for me, but there are lot of commands in it now. Is there a way I can get a tap autocomplete working for it in the windows command prompt?
For example: my script is called rob.bat and it takes in a various number of arguments
It'd like to type rob set{Tab} and then have it cycle through
setup_envvars
setup_userprefs
setup_whateverothersetupscriptsIhave
Is there a way to do this?
Console2 has no special provisions for tab completion and instead relies on the program running within it to provide such features. Picture Console2 as little more than something that runs a console program hidden somewhere, regularly polls that hidden window for changes, and forwards all input to that window; this is, in essence, what's happening.
Note that Console2 does nothing special with cmd. You can run any shell within it. As for customizing tab completion, cmd offers nothing of that sort. You may be able to change this by installing clink, which has extension points for Lua code. Another option would be PowerShell, which has customizable tab completion out of the box, either by wrapping your program in a function that provides the necessary parameters, or by writing a custom TabExpansion or TabExpansion2 function.