We have a new server running and we got some new programs doing import routines. So far so good... But there is one program that is put into autostart folder. So it doesn't run until admin logs in and it stops if we logout.
I'd like to put this one into a seperate session so it may work without any interaction by simply starting it with the task scheduler at startup. Is this the right way to do this? Is it safe if I log in later and log out?
Many thanks!
Edit: The applications shows as a symbol in the task bar if running, it can be configured by this. Anything I must know about this if I change?
Edit: It is not my application, I cannot rewrite it as a service.
I successfully added the application by using task schelduler on startup. Login and logout will not quit the application but no symbol is shown. Please add details to my side questions and I'll mark your answer as the accepted one.
Edit: Ended up using this one. If I have to configure, I stop the application in task manager and start it again by link. After that I quit the application and restart it by task scheduler manual start.
You need to run your program as a Windows Service. One way of doing it is using the sc.exe program:
> sc create <new_service_name> binPath= "c:\myapp\myapp.exe"
You can read about it here.
You need to separate your application in two.
To allow it to run without a user session, you need a windows service. That should handle all the background stuff. You can then register the service and set it to start when the system starts.
To allow it to have a UI, and show up in the notification area, you need a windows application. This will be in autostart as usual, and will communicate with the service - for example, over named pipes.
While it is still (barely) possible to run an UI application without a user session, it's only maintained for backwards compatibility, and already shows a lot of problems. It will likely be removed altogether in the future, because it breaks quite a few contracts. Do not rely on hacks like this.
I also used the task scheduler to create the application at system startup. It should be noted that if you want to use for mining, you have to disable an option in "settings" where it says that if the application lasts more than three days in a row it will end.
It really works wonderfully!
it is a old question but I recently solved in another way...
(before I was using a scheduled-task for startup but this gave me diverse problems with lots software...)
Some programs also for diverse reasons must be run at a user level... or even inside a specific user session...
So the best way I found was to use a tool like Sysinternal/Autoruns to program the auto-logon to a specific user (it is a registry setting)... and in the startup-folder of that user (or any other "autorun/autolaunch" task)... run a script that first locks the screen... and next runs the other intended programs... that will run under that user profile...
so you can choose a standard user or a administrator... or even launch programs from a standard user in adminsitrator mode...
I hope will help...
This "hack" solved me many problems with startup apps...
I could not get the "sc create" command to work. Instead I manually edited the registry using regedit. I added a new key in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services.
I used the following page to figure out required parameters and their values. Note that the names do not map.
https://learn.microsoft.com/en-us/windows-hardware/drivers/install/inf-addservice-directive
Old question, but for anyone that stumbles here. Use srvany to set the program as a custom service.
Note that when you do this with for example dropbox, googledrive, etc., you will need stop the service, then open the program normally to make changes like password, updates, etc.
below is a well enough intro.
https://www.iceflatline.com/2015/12/run-a-windows-application-as-a-service-with-srvany/
Download the tool kit here
https://www.microsoft.com/en-us/download/details.aspx?id=17657
Convert user application to Service and Register it using Regsvr32 or installutil.exe. It will start the service using SYSTEM user account. Which is a high privilege account.
Note : You can`t run any Window based application. Even a Message only window.
Related
I'm testing a custom WPF application using pywinauto.
When connecting with win32, I don't get any dependents, so I'm connecting with uia.
After I launch the application, I can immediately connect with pywinauto, but it takes 30s+ before I'm able to access any elements. After the initial delay, interacting and searching for controls is quick.
I call windows() as a way to wait until the application lets me interact with it.
main_app = Application(backend="uia").connect(path=APP_PATH)
main_app.windows()
On investigation, the hanging seems to occur during: "application.py" > "windows" > "findwindows.find_elements(...)" > "element.children(...).
If I open the application, and wait for 1 minute, and then run the script, then it occurs almost immediately. And finding subsequent controls is quick.
I appear to see this same behaviour when using inspect.exe to view the hierarchy. If I refresh immediately after opening the application, it takes 30s+ to show anything. But If I wait a minute before refreshing, it updates immediately.
I was wondering if someone else had experienced this before, and what might be the cause/solution.
I am running:
Windows 10, python 3.8.3, pywinauto 0.6.8
Sometimes setting an application as an firewall exceptions helps them boot/open faster.
Granting Firewall exception on Windows 10 for an application:
Go to Control Panel.
Click Windows Firewall or Windows Defender Firewall option.
Choose option "Allow an app or feature through Windows Firewall" (on left side).
Select your application in the list or click on Add Another App to find it and add it to list.
After debugging some more, I have resolved the issue, although it's not clear to me what the root cause actually was.
The custom application I'm testing launches a background application as a non-visible console. Testing showed that not running this background application allowed me to conenct immediately. Running the background application by itself would cause the same delay in inspect.exe loading.
The application was a dotnet framework application, that in theory was a console only application, but had code supporting a WPF interface (which was not displayed). By removing the WPF aspects of the project, I was able to build the application as a purely console application, and I no longer experienced the earlier delays.
I am trying to updating a software that is company wide. When the update is applied to the server, the client machines recognize they need an update and ask if you wish to update or not. To update, the user would need to run as admin, which is'nt an option in this case.
We would like to automate this process using powershell, using the Invoke-Command feature. For the most part, the only thing that the update does is copy new files to the programs folder, which we have achieved with robocopy. However, there is one registry key that needs to be added in multiple locations. There is a setup file that does this, but requires a user (with admin privileges) click a couple buttons, and we want this to be completely automated.
So I guess the short version of my question is, what is the best way to handle the registry changes that setup.exe does? It would be nice if there was a way to invoke the script that the executable does.
As for my question, I solved the problem with a slightly diferent approach. (One that should have been tried initially)
When (ProgramName).exe is run, if it sees that it needs updated, it runs a program called (ProgramName).setup.exe with the parameters :
Client="Local folder" server="server location"
These parameters did NOT work from the command line, however, and so I ended up using a powershell script to make a scheduled task that ran (ProgramName).setup.exe with said parameters.
Another huge advantage to this was the fact that I could create an icon that allowed a regular user to run the scheduled task with admin privileges. I couldn't setup a shortcut directly, however, I wrote an AUTO-it Executable that would run the task as admin.
I hope someone can get some level of help out of this post!
I was doing a small project and everytime I run the program, I can feel more lag and delay, until it is completely not working anymore.
I checked with the task managers and found many "Javaw.exe" Instances. Then I opened the debug field and realize that it runs a new instance everytime I run the same project.
here is the link to image of the instances in debug area.
http://i50.tinypic.com/2hz4spu.png
The temporary solution for me is to terminate them from the debug area. Is there any way to prevent the same project from creating a new instance everytime it is run ? I only need one instance that can be reused everytime I run again and again.
Thanks for any response in advance.
No, I'm sure that's not what you want. If you restart an application, it's probably that you want to test some changes you've just made in the code. So Eclipse needs to start a new instance of your application. You could also want to start two instances of an app because they need to talk to each other.
If you want previously launched applications to stop, then stop them. Your app seems to be a GUI app. Use the close button on the main frame of the app to close it. As simple as that.
It's often not desired to kill an application, because it might need to properly close resources, or tell the server it's leaving before exiting, or whatever. Having Eclipse kill apps without a conscious request from the user would not be wise.
I've been searching for this for awhile now, and I am not sure if I am just not using the correct search terms or if the answer is really that hard to find.
What I am trying to do is to create a new Windows service for a game server from a batch file, and then have a task run another batch file every 30 minutes or more that would run two commands on the game server's command line and do some file work.
Specifically, I am running a Minecraft server using Bukkit for a gaming community I help run, and I want to make sure that the thing is always up unless I specifically tell it to stop (like a service). Bukkit is run directly from a batch file and has it's own command line thing running on it.
I am told that you CAN run this type of thing as a service, but the command line will be hidden from view and/or interaction. This is the second part of my query. I have a handy little backup.bat file that copies all the world files and userdata files into a backup directory, 7zips it, and deletes the directory. The only thing is, is that Minecraft likes to always have the worlds' region files open and writing at all times, meaning that it could cause map corruption if I just run it straight off. To compensate, I need to run the command "save-off" on the server to disable the file hooks temporarily, run the backup, and as soon as it finishes, run "save-on" so that the game can continue without lost data.
What I would like to know about this second one is, is it possible to interface with the game service through a batch file, or do I need to create an application to do that? If the latter, how exactly does one go about doing that? I have moderate C++ knowledge (up through my second OO-C++ course in college), and can possibly learn another language if absolutely necessary.
So, in short, two questions:
1. Is it possible to, and how to run a BAT file as a Windows Service?
2. How to interface with said service via BAT files, and if not possible, what kind of application do I need to write (redirection to or writing a tutorial works for me).
Thank you in advance for any and all help!
Old question, user account doesn't seem active on SO anymore, but hey, if you stumble upon this because you have a similar problem:
Since we are speaking about a Bukkit Minecraft server, turn to the "Essentials" plugin for Bukkit.
It now includes a Backup function that does exactly what the OP asks for, namely stop the save so the files can be manipulated without corruption, launch a script, then starts again.
The script can be a backup one (examples provided in the linked page) but can be used to run any operation on the world's files.
How to set a specific logon time for a specific user on Windows XP?
For example, the computer is an "always on machine" and most of the time no one is logged on. I want to set a time for my user to log on, without someone actually having to be in front of the machine. I've tried a workaround with the built-in auto logon function (control userpassword2), but I still need a secure system as I'm not the only user, and would still want a password even if I was the only user.
I have searched for third party software, but to no avail. I've a good knowledge of batch and Python scripting and a little of Java, so any pointers with any of those would help.
How can it be "secure" if it logs you on without you being there? Surely it would be better for it to wait for you to type in a password (i.e. the login prompt)?
If you want a fast "startup" time, then you can lock the workstation (ctrl+alt+del to open the Task Manager and then click 'Lock'. This shows a dialog just like the login prompt, but when you enter your password you instantly continue your existing session). Or if you want to be more eco friendly, put your PC into Sleep mode, which most PCs will return from (again with an optional password prompt) in less than 5 seconds.
One way I just thought of: Run a Vnc Server, and hack into an open source viewer program. Then you can rig it with some code to pass keyboard commands back into the computer, maybe implement some screen scraping to make sure it only does it when appropriate.
But seriously, there has to be a better way. Why are you trying to do this?