I am trying to install the MATLAB Runtime (see www.mathworks.com/products/compiler/mcr) on Cent0S 7. I think I have installed MCR correctly because the install finishes through saying it completed after running
sudo ./install -mode silent -agreeToLicense yes
However, I am currently getting a error of:
Fatal error loading library /usr/local/MATLAB/MATLAB_Compiler_Runtime/v80/bin/glnxa64/libmwmclmcr.so Error: libXmu.so.6: cannot open shared object file
I have searched around on the forums and found a couple of post that indicate this may be an issue with either 32-bit vs. 64-bit libraries and/or X Windows. Also, I am pretty sure I am setting the following environment LD_LIBRARY_PATH and XAPPLRESDIR set variables correctly.
Has anyone out there successfully installed MATLAB Runtime on CentOS 7? Any help would be appreciated.
Thanks,
Derek
In case anyone else has this issue the following library install fixed the issue for me:
sudo yum install libXmu.x86_64
Related
I have met a problem with hdf5 libraries on eclipse CDT. When running a test C++ program, I got prompt information as below:
/home/lsl/Documents/CODE/eclipse-workspace/ReadWriteHDF5/Debug/ReadWriteHDF5:
error while loading shared libraries: libhdf5.so.103: cannot open
shared object file: No such file or directory.
libhdf5.so is confirmed to exist in /usr/local/lib/hdf5-1.10.4/lib and /usr/local/lib/hdf5-1.10.4/lib is within LD_LIBRARY_PATH. Do you have any indications?
Thanks very much!
It looks like Linux is your main operating system. See what happens when you type
sudo apt install libhdf5-dev
since it might supplant the package you're looking for. It worked for me.
I come across similar issue while compiling C++ code that uses Armadillo. Since I have anaconda installed, I find the libhdf5.so.103 file located at ~/anaconda3/lib. After I add the path to LD_LIBRARY_PATH, the error disappears.
I came across exactly the same problem today (perhaps the only difference is that it complaint libhdf5.so.200 was missing). What I eventually found out is that the system (Ubuntu 20.04) already shipped with libhdf5-dev at version 1.10.4, and this conflicted somehow with my installed version 1.12.2. My build command line is as below:
clang++ <...> -L/my/custom/path/to/hdf5-1.12.2/hdf5/lib <...>
Since the system hdf5 is in standard location, the linker finds simultaneously two versions, causing problem.
My solution is:
sudo apt purge libhdf5-dev
Hope it helps.
After conscientiously following the install instructions on Linux from swift.org, I encounter an issue where it is not possible to compile anything on a Ubuntu 18.04 machine. The REPL seems to work but during compilation (when calling swift build) the following error appears:
/usr/bin/ld: cannot find -lstdc++
There are more details in the full bug report [SR-9093]. I don't know at all what to do to solve this issue, there are similar problems already mentioned in other bug reports, for instance on this really old one [SR-35].
What should I do?
Thank you
I am assuming that you had already installed the libstdc++ successfully and you have set the permissions properly. But I really doubt that it was installed correctly but it was installed with corruption of some sort. The corruption occurred because you didn't install libstdc++ via a package manager. Result was some form of weirdness in the package manager database which effected the overall functioning system. Exactly why adding something to a folder should change anything at all. I don't know why this happens, unless the folder is hot i.e symbolically linked to a program which doesn't have any tolerance for hacks like simply copying a file into the folder. So for now try to install the libstdc++ again. Below is the link to the file to again download the correct program and this is compatible with amd64.
http://security.ubuntu.com/ubuntu/pool/main/g/gcc-5/libstdc++6_5.4.0-6ubuntu1~16.04.10_amd64.deb
And below are some link to help
https://ubuntuforums.org/showthread.php?t=1425470
https://ubuntuforums.org/showthread.php?t=808045
https://ubuntuforums.org/showthread.php?t=808045
https://packages.ubuntu.com/search?keywords=libstdc%2B%2B
https://packages.ubuntu.com/xenial/amd64/libstdc++6
Install libstdc++
sudo apt install libstdc++6
It seems possible that the apt install did not run the ldconfig program, which should be run to add the library to the list of those which ld.so knows about.
It looks like you can do it manually:
sudo ldconfig
IMPORTANT CAVEAT: I don't have Ubuntu and haven't been able to test this. And it's a sudo command. Run at your own risk, YMMV, etc.
If this does not work, it's possible that a file called /etc/ld.so.conf is not set up to search the directory where libstdc++ ended up. I wouldn't dare try to describe how to fix that.
sudo apt install -f
The command above should install any missing dependencies.
I am getting a bunch of compile errors when I try to install the MySQL DBD::mysql Perl library. I am trying to install this library on OpenSuse linux (SUSE Linux Enterprise server 10 (x86_64) version 10, patch level 4)
The install fails when trying to compile dbdimp.h. There are hundreds of complile errors but I have reason to believe they all stem from the first 3:
dbdimp.h:23:49: error: mysql.h: No such file or directory
dbdimp.h:24:45: error: mysqld_error.h: No such file or directory
dbdimp.h:26:49: error: errmsg.h: No such file or directory
I believe that the reason I am getting the errors above is that I have no MySql Client installed. I do not know how to install mysql client (I believe I am supposed to get some version of libmysqlclient).
I am brand new to opensuse and vaguely familar with installing packages on Linux in general have used yum, yast, apt-get on ubuntu + centOS previously but the only package manager tools that seem to be on OpenSuse 10 are rpm and zypper. I have not managed to install the required mysql client using either of these. If anyone knows how to install MySql Client to resolve my issue I would greatly appreciate any recomendations
Thanks
You need to install MySQL or the MySQL client libraries, either through your system's package manager or by following the installation instructions from the source code.
It sounds like your question is really "How do I install MySQL on OpenSuse", which would be more appropriate for one of the other StackExchange sites.
I was able to resolve this to a point. In my original question, I stated that I had tried using YAST but that it had not worked. In fact, I did not fully explore the YAST install option but when I did, I managed to download install the required librarys by following an article I found (http://adminramble.com/install-mysql-yast/#chitika_close_button)
I was able to open the YAST GUI in the terminal window (not an X-window display) and navigate through the "software management" section wherein I was able to do a search for MySql. Amoung the search results were mysql client libraries, which I then selected and hit "Accept". The installation started and completed successully.
In order to complile the PERL DBD::mysql module, I had to create a new makefile with the ccflags specified so that the header files could be found:
perl Makefile.PL --cflags -I/usr/include/mysql
I say "to a point" at the top of this comment because I then ran into further problems compiling but my original issue posted has been partially resolved and getting this far may help someone else who is experiencing the same problem. Will update if I get a solution to the compile problem.
I am new to Omnet++. I installed Omnetpp-3.3p1 and am having trouble opening it. I tried creating a makefile within the project which has simulation codes with command opp_makemake -f -N, but I am getting command opp_makemake not found error. Am I missing something here?
The error might raise if OMNeT++ is not properly installed or the lib is not properly linked. This PDF should be what you are looking for, since it explains how to properly install version 3.3p1. - Hope to help!
I have installed Eclipse 3.5.2 and the plugin Subversion JavaHL Native Library Adapter 1.6.9.2 and this worked without any problems. However, this morning I was forced to change the password to logon to my Mac and since then I get the message that "Subversion native library not available" when I try to save any changes. Can anyone help? I have tried to add this line (-Djava.library.path=/usr/lib/jni) to the eclipse.ini file but this didn´t seem to make any difference.
Can anyone help?
Install MacPorts or HomeBrew, then run the following command:
For MacPorts, the commands to run are:
sudo port install subversion-javahlbindings +no_bdb +universal
For HomeBrew, the command is:
brew install --universal --java subversion
I was having a similar problem on Mac OS X Snow Leopard. I suspect your libraries are there but just need permissions changed, whereas I didn't have the libs at all.
The directory to check is /opt/subversion/lib, see if it has any libsvnjavahl files. In your case they may be there and just need new permissions.
To get the files I followed the the instructions they give for installing JavaHL on OS X, which is to download and install Open CollabNet. (login required, although it's free)
Then you just need to update your environment variable in .profile, something like:
export PATH=.:/opt/subversion/bin:$HOME/bin:$PATH
Then ran:
. .profile
Then I tested with javahltests.jar as mentioned here.
The easiest thing to do is download and install the OSX package that is provided on openCollabNet.
MacPorts also provides an easy Subversion and JavaHL package, however on Snow Leopard ?MacPorts is still compiling these packages as simple 32-bit binaries. If you use the default Snow Leopard JVM which is 64-bit you will get an error...
Failed to load JavaHL Library.
These are the errors that were encountered:
no libsvnjavahl-1 in java.library.path
no svnjavahl-1 in java.library.path
/opt/local/lib/libsvnjavahl-1.0.0.0.dylib: no suitable image found. Did find: /opt/local/lib/libsvnjavahl-1.0.0.0.dylib: mach-o, but wrong architecture
Note the error about wrong architecture. This is because the 64-bit JVM cannot load a 32-bit native library. The ?CollabNet binaries for OSX do not have this problem because they include both 32-bit and 64-bit versions.
Source: subclipse.tigris.org
Here is a blog entry that gives a solution:
http://blog.mattwoodward.com/getting-rid-of-subversion-native-library-not
I don't know whether this will work in your particular situation, but it's worth a try.
(Edited to fix link that became broken after I posted. The link became broken sometime between May 3 and June 1.)
In case you already have subversion installed I'd recommend performing first a brew uninstall and then the install again. And follow the steps to create the links indicated after the install concludes. This worked for me. Regards
I fixed it installing the SVNKit Client Adapter (not required) package.