I'm trying to add a new 'Validate Address' service on Bluemix and must register (at Pitney Bowes) to receive my API key. I get this error from the link provided by Bluemix portal when I try to access the sign up page. Is this based on my Bluemix ID or Pitney Bowes related?
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Body>
<env:Fault>
<faultcode>env:Client</faultcode>
<faultstring>Internal Error</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
After registering a support ticket with Pitney Bowes, the issue seems to have been that the link provided initially from Bluemix > add Service > Validate Address to Developer Registration Page was 'http' and needed to be updated to 'https'.
This link seems to have been corrected and works as intended now.
Related
I recently created a chatbot via http://dev.botframework.com/bots (the page initially displayed the info that I did not have any bots). The form redirected me to Azure Portal where I chose a new "Web App Bot" option. I also created all required resources (RG and even setup a new tenant with admin rights).
After successful deployment I got the following issues:
Test in Web Chat in bot settings (Azure Portal) shows "There was an error getting a Chat authorization token. Refresh and try again."
Channels in bot settings shows "Unable to find the bot with the specified id."
dev.botframework.com/bots shows there are no bots created
Have anyone had this issue?
I also get same issue and it got resolved, Please refer below url , it may help you as well.
https://github.com/Microsoft/BotFramework-Emulator/issues/1068
Created account on Bluemix and tried subscribing Apis from Pitney Bowes, I am not able to get the key/secret to call Apis.
Trouble finding them from environment variables.
Follow these steps to get the Pitney Bowes API Key and Secret:
In the IBM Cloud dashboard open your Pitney Bowes service instance
Then, click on the Open Dashboard button to open Pitney Bowes developer hub
In the Pitney Bowes developer hub select the My Account tab and scroll down to bottom of the page to see your API Key and Secret
I'm doing the, Getting Started with AlchemyAPI Using Ruby, Ruby tutorial. But I cannot seem to find my API key.
Source: http://www.alchemyapi.com/developers/getting-started-guide/using-alchemyapi-with-ruby
At step 3:
3) Configure the Ruby SDK to use your API Key Now that you have the
Ruby SDK code on your computer, you need to do configure it to use
your API key. In the alchemyapi_ruby directory, run:
ruby alchemyapi.rb YOUR_API_KEY
Where YOUR_API_KEY is the 40 character API key you received in your
e-mail when you registered. If everything goes okay, you should see
the following output:
But I didn't get an API Key in an email...
The tutorial sent me to IBM Bluemix to register, which I have.
This is the email from signing up.
Hi XXX,
Thank you for signing up for Bluemix! During your trial, you'll have
access to Bluemix to build apps, with 2 GB of runtime and container
memory, as well as up to 10 provisioned Bluemix services. And, you
won't need to provide any form of payment for this trial.
Confirm your account to start your 30-day trial.
If you have any problems logging in, let us know at IBM Bluemix
Support.
Welcome to Bluemix!
--IBM Bluemix Team
After confirming - still no API Key. I've logged into the Bluemix site and have been searching around but also don't see it.
I apologize in advance if I've missed something obvious. But I'm wasting a lot of time here and would really appreciate any help :)
Has anyone signed up for this service recently and been able to get their API key. Can you tell me where it came from?
Login to Bluemix, go to Services & APIs. In Watson section chose AlchemyAPI and create one. After AlchemyAPI is created go to the dashboard and select created instance.
Under Service Credentials you can find the apikey:
After the acquisition of AlchemyApi by IBM the endpoints have changed hence the old legacy code in GitHub will not be able to use the key which you get from ibm bluemix.
Click on the watson --> then on the previously created credentials --> again click create. Then highlight the 'service credentials' to see the json format details.
I get the following error when linking IBM id to Bluemix:
IBM Bluemix
Failure during registration
An error occurred.
Try again in a few minutes. If you continue to have problems, click the following link to get help: https://developer.ibm.com/bluemix/support/
This is after following the email I received:
Hello there.
Your account requires attention
The authentication process for IBM Bluemix DevOps Services is integrating with IBM Bluemix. To ensure that you can continue to log in without disruption, register with Bluemix by taking a few steps.
SIGN UP
Step 1
Click SIGN UP
Step 2
Click Already have an IBM ID?
Step 3
Type your phone number and email address.
Step 4
Check your email to verify that you're registered. In the email, click Validate Email Address.
Step 5
Sign in by typing your IBM ID and password.
Step 6
Welcome to IBM Bluemix. You're done!
I have tried this a few times, and I'm not sure what I need to do next.
Please address the problem to Bluemix support using the following mail: id#bluemix.net. This team will assist you on this issue. Thanks.
Same problem here. But I realized that I already have registered in Bluemix.
So, right under "Already have an IBM ID?" there is: "Already signed up for Bluemix? Log in".
This "Log in" link points to login page which, after entering my credentials, it redirects to https://console.ng.bluemix.net/?direct=classic. I don't know what this argument "?direct=classic" means, but the page won't show. So I removed it and everything is working fine.
I'm building a CloudFoundry application in Bluemix using the API Management service. For this I'm following this tutorial http://www.ibm.com/developerworks/cloud/library/cl-bluemix-api-mgmt-app/index.html.
I can successfully create an API Plan for a custom REST API application (running on a Liberty server on Bluemix as well) and it is published.
I can also create a service in my Bluemix dashboard using the new Custom API, which I take as the API plan was successfully deployed on Bluemix.
Whenever I try to bind this new service I get the following message:
BXNUI2055E: Unable to connect to Cloud Foundry because of the
following exception: "Read timed out." If the problem persists, see
the Troubleshooting topics in the IBM Bluemix Documentation to check
service status, review troubleshooting information, or for information
about getting help.
From time to time I also get this message
The service broker returned an invalid response for the request to
https://apimasv1-stage.stage1.mybluemix.net/d118dceb-edbf-4a7f-9bab-d44371b0c9f9/privateservices/v2/service_instances/1a60830c-0796-4105-afb4-e3477424acf9/service_bindings/ebb853dc-ec88-4987-b8f2-e9acd38d1741.
Status Code: 502 Bad Gateway, Body: 502 Bad Gateway: Registered
endpoint failed to handle the request.
Also, I can open the API portal and see the services listed in there. However, whenever I try to test the service, I get the following error
A security error has occurred. If using a self-signed certificate on
your gateway, you will need to accept it in your browser, which you
can do by clicking the following link.
https://api.wawona.apim.ibmcloud.com/victorshmx1ibmcom-dev/sb/LibraryREST/rs/authors/1
Also, below in the response I get this message:
NetworkError: Failed to execute 'send' on 'XMLHttpRequest': Failed to
load
'https://api.wawona.apim.ibmcloud.com/victorshmx1ibmcom-dev/sb/LibraryREST/rs/authors/1'.
I must clarify this service (the liberty app) doesn't have any security constraint to access the REST service nor I added some kind of security in the API Management portal.
Another thing to clarify is that I can bind other services, but not this one.
Does anyone know how I can fix those problems? Is there a known issue with IBM API Management service?
this seems to be an error with the service API Management instance you are trying to bind to.
You could open a ticket to support team following the link you can find here:
https://developer.ibm.com/bluemix/support/
Click on 'Contact IBM' and open a 'Support ticket'