I want to start creating games for Android/IOS. I have already created 2D games using XNA and I want to publish them on other platforms even PCs but my highest priority is Mobile platforms. As I said I am familiar with XNA so I need a similar Engine for 2D. It would be great if I could write once and publish on many platforms. Please dont suggest Unity or Unreal. They are not that easy when it comes to 2D.
By similar I mean, for example, how easy to draw a sprite on the screen.
Note: I am working on Windows so no Mac suggestions please.
Regards,
You may also want to consider MonoGame ( https://github.com/mono/MonoGame/ ) as that is also an Open Source, OpenGL implementation of XNA that currently has support for iOS, Android, MacOS X, Windows and recently Linux. It is now all ES 2.0 on the mobile platforms. Our biggest change is that we now support Windows 8, and have a DirectX 11 backend thanks to SharpDX. We now also have initial PlayStation mobile support.
Actually ExEn, is a fork of MonoGame( originally called XNATouch ).
For a list of games on the AppStore or Android Market place and even NaLC, currently using MonoGame look here -
http://monogame.codeplex.com/
I hope this helps.
D.
You might want to keep up on the project called ExEn, which has already successfully ported some XNA samples and smaller games to iPhone and Android. It requires relatively little work to port and refactor to these platforms.
I suggest you check out AndEngine, its an open-source 2d open-gl based game engine that has a strong community. If you want something that you can make cross platform games with check out LibGDX It too is free, open source and based on openGl but it also allows for 3d games. It is also cross platform so a game you write for android can be compiled for, Windows, MacOS (see below), Linux. It also has a really strong community.
Regarding iOS and OSX games you really can't make them unless you buy a Mac. Apple doesn't distribute their SDK for use on any other platform but their own. That said you could maybe get something working under VMWare
Check out MOAI SDK. It's completely free and open-source. It is in beta right now but it is still pretty good. Crimson Pirates for iOS was developed with it.
Right now it supports iOS, Android, Mac, Windows, and Linux. Really good. I thought I liked Cocos2D-x, which is a C++ variant of Cocos2d-iphone supporting windows, iOS (not Mac), and Android but not truely supporting desktop kinda made me like MOAI more.
You can use C++ with MOAI or you can use Lua (they highly encourage using Lua). Being built in C++ is really great because you get access to a vast amount of libraries and you can easily bind them to Lua.
You should try games development with cocos2d.
Cocos2d is one of the best 2d engines for ios/Android I have come across.
http://www.cocos2d-iphone.org/
It is openGL based free engine.
Regards,
Sam
These might be useful to you. However, the first two aren't free, but they have editions for both iOS and Android.
iOS:
http://ios.xamarin.com/
Android:
http://android.xamarin.com/
I've never used either of them, but it's something I've been looking into a bit.
Apparently it lets you run C# and .NET code on both iOS and Android which is pretty cool considering how much easier drawing and things like that are in XNA compared to Open GL ES 2.0. Not to mention the fact that you'd be using C# instead of objective C.
There's also a free open source version sponsored by the same people who make the two I listed above. This one lets you run C# and .NET code on Windows, Linux, and Mac OS X.
http://www.mono-project.com/Main_Page
I have been researching this topic intensively over the last few weeks.
I think the best solution for you is Marmalade, formerly known as Airplay SDK. It is actually more Windows-oriented than Mac (work in Visual Studio), although you still need a Mac for the final step of getting a signed app onto the store. It sounds like a very capable pure C++ product with iOS and Android as well as a bunch of other platforms, Personal license with splash screen $150 pa, single seat Professional $500 pa for all platforms. They have a 45 day trial license which I'm currently using.
I was tempted by MonoGame, could live with the $400 price tag for each platform (for the needed MonoTouch) but it is just way too buggy. The final straw was a combination of a bug causing it to crash all the samples on iOS5 and that keyboard input is broken on iOS.
Too be fair, I'm pretty sure that is all on the MonoGame side and was very impressed with how well MonoTouch worked and was looking forward to programming in c# with LINQ et al.
Since it is not obvious from the other answers, it should be noted to those who are unaware that the ExEn project and the MonoGame projects both build on the Monotouch platform from Xamarin (formerly from Novell) - which is a prerequisite for both for iOS games.
The Xamarin projects was mentioned in another answer as an alternative to Xna, but is really not. Monotouch and Mono for Android are a way to run C# and .NET on iPhone/iPad and Android.
Game development at least on the iPhone side, is typically done using OpenGL and OpenGL is also wrapped in Monotouch. The Xna implementations in Exen and MonoGame also uses OpenGL as the foundation as far as I know.
It should also be noted that Monotouch and Mono for Android are commercial products.
BTW: Exen also compiles to other platforms e.g. silverlight.
I am interested in writing games for the iPhone and the Web. Ideally, there would be one language that I could write my games in and it would work on both platforms. I know this is not the case, so what is the best way to leverage code between iPhone apps (Objective-C/C++) and Flash SWFs (ActionScript)?
This maybe of some help
It uses the NME library which will allows code to mostly be written to the Flash 9 API and create the C++ for XCode to compile and run on the iPhone and Touch. This creates a path to port Flash games to iPhone/Touch.
Unfortunately, Flash and Objective-C are very, very different - and it's unlikely that a Flash player will be available for the iPhone in the near future. The native input methods used in Flash games - the keyboard and mouse - don't lend themselves well to the iPhone. While Apple could make Flash run on the iPhone, most Flash games would be totally unplayable (or feel very unnatural. They'd have to overlay a keyboard probably?). With the success of the App Store and native iPhone games, I think it's very unlikely you'll see Flash support anytime soon.
You might want to consider using a game development tool like Unity instead of Flash in the future. Unity allows you to create both 2D and 3D games, and you can program them in various .NET scripting languages. Once you've created the game, you can cross-compile it for web (their own plugin, not Flash), iPhone, or the desktop.
I know that doesn't help much since you have an existing codebase, but it might be something to consider for the future!
My company is developing a toolchain that allows compiling ActionScript3 to native code for mobile devices.
It now supports Windows Mobile and Symbian, and iPhone supported will be released in a couple of weeks.
Check it out at: http://developer.openplug.com/
BR
Guilhem
Adobe Alchemy looks promising. It is not released yet, but from their website:
Alchemy is a research project that allows users to compile C and C++ code that is targeted to run on the open source ActionScript Virtual Machine (AVM2).
This would allow iPhone apps and Web apps to share non OS-dependent C/C++ code, which is a very exciting prospect.
One option would be building everything in unity. The engine facilitates building the same game project to any of the following platforms:
Webplayer
OS X
Windows
iPhone
Wii
Actually, the iPhone supports Flash technically (see Developer creates Flash for iPhone and Flash Installer Update #2). It is just Apple's crippleware restrictions that prevent installation.
Other than that, there's really not much you can do. Flash/ActionScript and Objective-C are radically different. You can have a central server store data, but that doesn't solve the duplicated logic.
If you're already willing to use ActionScript you could go all the way over to the dark side and switch to Javascript. That's the only common language supported by your clients (web and iPhone).
How comfortable you are with either development environment certainly plays a role here. If you are a die-hard Objective C and a super star Actionscript programmer then doing both shouldn't be much of a problem. It will be lots of work of course, but not a problem.
However, if you are neither or only skilled at Actionscript then I suggest you focus on Flash/Actionscript for the time being. Eventually Flash will be available on the iPhone anyway. When that happens you can already have a number of apps ready to be quickly ported to iPhone. Also keep in mind. There are more portable devices out there than just iPhone. Getting your apps running on other devices might be worth it in the mean time.
Just keep in mind when you're developing your apps now that at one point you also want to run these apps on the iPhone. So make 'm in such a way that they can be controlled with an iPhone as well.
Updating this old QA with new information. The recently released monkey development framework deploys to both iOS and Flash: http://www.monkeycoder.co.nz/
It's so new that I wouldn't necessarily recommend it, but it has a great pedigree: the creator made Blitz3D and BlitzMax before, and those were great game development tools.
That said, I would strongly recommend a combo like Corona for iOS and Flash for web, so that you're using optimal tools for each platform.
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
Is there any way to tinker with the iPhone SDK on a Windows machine? Are there plans for an iPhone SDK version for Windows?
The only other way I can think of doing this is to run a Mac VM image on a VMWare server running on Windows, although I'm not too sure how legal this is.
It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)
There are three routes;
Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
Use a framework and/or toolset, which allows developing on Windows, like Delphi XE4 with the mac-in-cloud service, which can build without MacOS device need. This is a commercial toolset, but the component and lib support is growing.
Other honorable mentions are Flutter, Xamarin and similar; which may at end need actual MacOS device for final build (but you can test on Android till then, as they're cross-platform).
The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.
If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.
The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.
If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.
I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.
Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.
Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase
Xamarin is a solid choice. It was purchased by Microsoft and is now built directly into Visual Studio. You code in C#. With all the updates and features they are adding, you can do everything but submit to the App Store from Windows, even compile, build and deploy to an iOS device.
For games, Unity 3D is a great option. The editor is free to use for development, and even for distribution (if you have less than 100K USD in annual revenue). Unity supports iOS, Android and most other platforms. It may be possible to use Unity's "Cloud Build" feature to avoid having to use a Mac for deployment, although by default Unity actually spits out an Xcode project when building for iOS.
Other options:
PhoneGap (html/javascript) also works. It isn't quite as nice for gaming, but it's pretty decent for regular GUI applications.
Flutter (dart) is a free cross platform mobile app development framework from Google. Write your code in Dart.
React Native (javascript) is another popular cross-platform framework created by Facebook.
Note that: for all of these options, all or most of the development can be done on Windows, but a MacOS device is still required to build a binary for submission to the App Store. One option is to get a cheap MAC Mini to do your final build.
If you have a jailbroken iPhone, you can install the iphone-gcc toolchain onto the iPhone through Cydia and that way you can just compilie the apps on the iPhone. Apps that are developed this way can still be submitted to the App Store.
And although Mr Valdez said it is a grey area (which it is), jailbreaking is incredibly easy and pretty much risk free. Yes, it voids your warrenty but you can just do a restore and they will never know.
Most of "so called Windows solutions for iOS development without Mac" require Mac at the end just to sign and send to app store. I checked a few, not all though (who has the time?)
At the end it's just too much trouble to learn "their super special easy way to program iOS without Objective-C", they have lots of bugs. Really the goal they are setting is unachievable in my view.
Also a lot of time they make you use Objective-C equivalent statements simply in another language. They kind of look the same but there are always subtle differences that you have to learn on top of obj-c. Which also makes even less sense, because now instead of learning less you have to learn more. So where is the gain?
Also they cost a lot, because they are very hard to develop.
Many lack any debugging abilities whatsoever.
In my honest opinion, if you are a hard-core iOS developer then for sure buy the best Mac and learn objective-c. It's expensive and takes time, but if it's your path, it's worth it.
For an occasional use, it's just easier to rent a remote Mac service, like XCodeClub.com
The SDK is only available on OS X, forcing you to use a mac. If you don't want to purchase a mac you can either run OS X on a virtual machine on your windows box, or you can install OS X on your PC.
In my experience the virtual machine solution is unusably slow (on a core2 duo laptop with 2G ram). If you feel like trying it search for the torrent. It's probably not worthwhile.
The other option is to install OS X on your PC, commonly referred to as a hackintosh. Hackintoshes work quite well - my friend just sold his mac because his Dell quad core hackintosh was actually much faster than the apple hardware (and cost about 1/3).
Of course both of these options are likely counter to some licensing scheme, so proceed at your own risk.
You can use WinChain
Quoting the project page:
It's the easiest way to build the iPhone toolchain on a Windows XP/Vista computer, which in turn, can take Objective-C source code that you write using their UIKit Headers (included with winChain) and compile it into an application that you can use on your iPhone.
You don't need to own a Mac nor do you need to learn Objective-C. You can develop in different environments and compile into Objective-C later on.
developing for the iphone and ipad by runing osx 10.6(snow leopard)
This article one of our developers wrote gives a pretty comprehensive walk through on installing OS X Snow Leopard on Windows using iBoot, then installing Vmware (with instructions), then getting your iPhone dev environment going... and a few extra juicy things. Super helpful for me.
Hope that helps. It uses Phonegap so you can develop on multiple smart phone platforms at once.
You can use Tersus (free, open source).
A devkit that allows one to develop iPhone apps in Objective-C, C++ or just plain C with Visual Studio:
Check it out at iOS build env
You can build iPhone apps directly within Visual Studio (2008, 2010, Express).
Pretty neat, it even builds IPA files for your app after a successful compilation. The code works as is on jailbroken devices, for the rest of the planet I believe the final compilation & submission to the App Store has to be done on a Mac. But still, it enables you to develop using a well-known IDE.
Of course, you can write Objective-C code in notepad or other programs and then move it to a Mac to compile.
But seriously, it depends on whether you are developing official applications to put in App Store or developing applications for jailbroken iPhone. To write official applications, Apple iPhone SDK which requires an Intel Mac seems to be the only practical way. However, there is an unofficial toolchain to write applications for jailbroken iPhones. You can run it on Linux and Windows (using Cygwin).
Try macincloud.com It allows you to rent a mac and access it through RDP remote control. You can then use your PC to access a mac and then develop your apps.
You will soon be able to use Adobe Flash CS 5 to create Apps for the iPhone on Windows:
flashcs 5
flashcs5 apps for iphone
Hooray! You can now more easily accomplish this with the latest Xamarin.iOS, using a network-linked mac providing the build and deployment capabilities.
See here for more details:
introduction to xamarin ios for visual studio
If you want it to be legitimate, you have two options, cloud based Mac solutions or cross-platform development tools.
You may consider the hackintosh approach or virtual machines if you don't care about legal stuff. If you have a decent PC, running a virtual machine would be the easiest way to go. You may never know which hardware will have driver issues on a hackintosh.
I've tried all these approaches and they all have pros and cons, but for the second group, I feel kind of guilty. I develop apps to make a living and I wouldn't want to rip off someone else for it.
If you are making a small project, cloud based Macs may prove useful. Rent it for a short time, develop your project and off you go. Don't bother learning anything new.
However, if your project is getting big, cross-platform frameworks seem to be the only alternative. The critical thing is that you need to choose wisely. There are so many hybrid frameworks, but what they do can be summarized in one sentence as "diplaying web pages in an app wrapper" and developers' negative experience with hybrid frameworks also affects native frameworks.
I tried three of these (Titanium, Smartface and Xamarin) and they all claim to produce "real native output" and in my opinion their claims are correct. You need to test and see it yoursrlf, it's not easy to describe the native feeling. In a previous comment, it was indicated that it takes some effort to learn these platforms, but once you get to know them, you can develop not just iOS applications but Android applications as well, all with the common code base. And of course, they are much cheaper than a cloud Mac. Some of them are even free. You would need a Mac only for store submission.
If you know JavaScript, try Titanium and Smartface and if you know C#, try Xamarin. Just note that for the device simuator, Titanium is dependent on a Mac, but Smartface has a simulator app for Windows development and it works better than I expected. On the other hand, Xamarin requires a Mac in your network.
If you want to create iPhone apps but no Mac, then you should try http://www.pmbaty.com/iosbuildenv/
It allows you to easily develop native iOS apps, like with XCode, deployable on any iPhone, iPod or iPad (jailbroken or not).
Use your favourite IDE to code in Objective-C, C++, C or ARM assembly, like in XCode. ARC and blocks are supported.
Compile your iPhone apps directly inside Visual Studio
It works on Windows all versions (XP, 7, 8), FreeBSD and Linux
Now with iOS8 support.
Check out this:
Over view
It is a project that attempts to be able to cross-compile programs written in a variety of source languages to a variety of target languages. One of the initial test cases was to write programs in Java and run them on an iPhone. Watching the video on the site is worthwhile.
With that said, I haven't tried it. The project seems quite beta, and there isn't a lot of activity on their SourceForge site.
You can use Intel XDK with that you can develop and publish app for iOS without mac.
Click here for detail.
Interesting that no one has mentioned the cross-platform wxWidgets option.
It's less than an optimal solution, though.
IMHO, the business-wisest way to go is to invest the money in Apple's endorsed framework. That way, if you find yourself stuck with some mind-boggling problem, you have a much larger community of developers to consult with.
YOU CAN DEVELOP IPHONE APPS ON WINDOWS PC. I've done it, with complex apps. And it works perfectly. You can develop iphone apps without ever seeing a mac or iphone.
You can develop on windows an HTML (or better: HTML5) app, using tools like Sencha or JQTouch, or mobi1. (They used to all be free for a while)
Then you use openSSL to sign the app. And Adobe PhoneGAP Build service to build IPhone App.
But you need the iphone developer licence to install it on an iphone. But you don't need a mac or iphone at any minute to compile, build or test it - all that is done ON THE PC.
I've done it, and it works perfectly. (But with Android type responsiveness - not as fast as a native IPhone app)
You could also use a program from the the Babylonian era (circa 300 bc) running C and C++ called dragonfly. If your app has one or two screens with limited interactivity, and many calculations, go for it. It includes an emulator. You compile to the iphone at the press of a button. (Not sure, but I think you do need a developers license in any case)
And then there is Xamarin. You develop in C# with special calls to native code. You'll have to learn the environment.
Oracle VirtualBox allows users to install Mac OS X in a virtual machine. If you are comfortable with it, you could just use that way to use Xcode. This is legal if you "dual boot" your mac into windows, then install the VirtualBox within windows (or linux).
Other possibilities are cross-compilers such as Appcelerator Titanium (HTML, CSS and JavaScript) or MonoTouch (.NET).
You can use Sentenza for make applications for iPhone, on Windows.
Tested with success.
It's not a solution but a good alternative !
Two other options
Titanium Developer - free community edition - write in HTML/JavaScript - compile with Xcode (requires a Mac or VM)
OpenPlus ELIPS Studio - write in Flex, compile on Xcode (requires a Mac or VM) - they just started charging for their product however.
I think there may be 'toolchain' options for these and some of the others mentioned, which allow you to compile to binary on Windows, and I have seen that you can upload a zip file and have a toolchain style compile done for you online, but this goes against the Apple licensing.
If I am not mistaken, a product such as Titanium that outputs/works with Xcode and does not use any 3rd party / alternative / restricted libraries should be in compliance, because you are ultimately compiling in xcode - normal Objective-C code and libraries.
As has been pointed you can attempt to use the WinChain but if you are a newbie coder it won't be easy.
The iPhone SDK will work on Hackintoshes (a normal PC with OS X installed on it). I know as I have one and it does.
So after you go buy an OSX license you could TRY to install it on your PC on a different drive using Boot-132 or one of the other installers like iDeneb. The issue you will have to do a lot of tinkering and things still won't work quite right.
Using Xamarin now we can develop iPhone applications in Windows machine itself with the help of Xamarin Live Player.
Using this Xamarin live player dev/deploy/debug cycle can now be done without an Apple system.
But to sign and release the app Apple system is required.
Find the reference here
I checked the reference nothing dodgy
Yes and you don't need to learn Objective-C and buying Apple software and hardware.
Adobe have created compilator from ActionScript 3 to program for iOS. And later Apple approved this method of application creation.
This is best way to create Apple applications under Windows or Linux/BSD (and another one for MacOS-X)
If you want to develop an application on Windows environment then there is an option, you can install MAC OS in your windows Platform name is : "Niresh'MAC OS" , you can search that text on Google
then you can download the whole MAC OS Source and easily installed MAC OS in your Windows PC, Niresh is able to Hack the whole OS.
Hope this will help you.
You can install OSX on PC but experience wont be great and it needs lot of work. Alternate is to use a framework/SDK Codename one: which is based on JAVA and can be used to code in WP8, Android, iOS on Windows (eclipse) with all extensive features
Features Overview:
Full Android environment with super fast android simulator
An iPhone/iPad simulator with easy to take iPhone apps to large screen iPad in minutes.
Full support for standard java debugging, profiling for apps on any platform.
Easy themeing / styling – Only a click away
More at Develop Android, iOS iPhone, WP8 apps using Java
Disclaimer: This is my review for the product
Develop iOS Apps on Windows With Cross-Platform Tools
Cross-platform tools are awesome: you code your app once, and export it to iOS and Android. That could potentially cut your app development time and cost in half. Several cross-platform tools allow you to develop iOS apps on a Windows PC, or allow you to compile the app if there’s a Mac in your local network.
Well, not so fast…
The cross-platform tool ecosystem is very large. On the one side you have complete Integrated Development Environments (IDEs) like Xamarin, that allow you to build cross-platform apps with C#.
The middle ground is covered by tools like PhoneGap, Cordova, Ionic and Appcelerator, that let you build native apps with HTML5 components. The far end includes smaller platforms like React Native that allow you to write native apps with a JavaScript wrapper.
The one thing that stands out for all cross-platform tools is this: they’re not beginner friendly! It’s much easier to get access to a Mac, learn Swift, and build a simple app, than it is to get started with Xamarin.
Most of the cross-platform tools require you to have a basic understanding of programming, compilation options, and the iOS and Android ecosystems. That’s something you don’t really have as a beginner developer!
Having said that, let’s look at a couple of options:
If you’re familiar with Windows-based development tools and IDEs, and if you already know how to code, it’s worthwhile to check out Xamarin. With Xamarin you code apps in C#, for multiple platforms, using the Mono and MonoTouch frameworks.
If you’re familiar with web-based development, check out PhoneGap or Ionic. You’ll feel right at home with HTML 5, CSS and JavaScript. Don’t forget: a native app works different than a website…
If you’re familiar with JavaScript, or if you’d rather learn to code JavaScript than Swift, check out React Native. With React Native you can code native apps for iOS and Android using a “wrapper”.
Always deliberately choose for cross-platform tools because it’s a smart option, not because you think a native platform language is bad. The fact that one option isn’t right, doesn’t immediately make another option smarter!
If you don’t want to join the proprietary closed Apple universe, don’t forget that many cross-platform tools are operated by equally evil companies like Google, Facebook, Microsoft, Adobe and Amazon.
An often heard argument against cross-platform tools is that they offer limited access to and support for smartphone hardware, and are less “snappy” than their native counterparts. Keep in mind that any cross-platform tool will require you to write platform-specific code at one point, especially if you want to code custom features.
If you have ssh access to a Mac, then you can use a VNC (like Vine VNC, which allows multiple uses at once - thin thin client) to control XCode.
This could be useful if you wanted to access a Mac Mini from a laptop, or your S.O. is hogging your MacBook.
You may try to develop web apps for iPhone using HTML, JavaScript, CSS. Check the getting started info at Apple's site.