We are trialing a test migration of a project on TFS 2010 (on prem) to #visual-studio-online using #OpsHub . During the migration phase at the user mapping window we are getting the below error message.
2015-07-08 15:10:49,916 [4] ERROR Error : The operation has timed out
at System.Net.HttpWebRequest.GetResponse() at
Microsoft.TeamFoundation.Client.Channels.TfsHttpWebRequest.SendRequestAndGetResponse(HttpWebRequest
webRequest, WebException& webException)
I am not able to find much information on-line about this error. I tried doing the migration as a TFS administrator and as a domain user who has project admin access to the project but still get these time out errors.
I saw online a user upgraded to #OpsHub 1.3 from 1.2 to overcome this issue which I tried but still doesn't help. Do we need to open any other ports for this to work apart from 80 and 443? Any suggestion as to how to over come this issue?
From the logs we find out that error is about time out from your local tfs server.
Server Error : TF400324: Team Foundation services are not available from server tfs.nextdigital.com\Next Digital.
Technical information (for administrator):
The operation has timed out
Here you need to work with your tfs admin to increase timeout parameter of your tfs.
Following thread might help you in this.
http://blogs.msdn.com/b/ablock/archive/2008/09/16/increasing-the-time-out-time.aspx
Thanks & Regards,OpsHub Support
Related
I'm trying to deploy an application via web deploy to a windows 2012 r2 server.
First tried installing iis, web deploy using the msi. After getting an unreachable error I saw somewhere that I needed wmsvc to be installed and installed it via powershell command Install-WindowsFeature Web-Mgmt-Service.
I stopped getting the unreachable error and started getting this error ->
Error: Could not complete the request to remote agent URL 'http://xx.x.xx.xx:8172/MSDEPLOYAGENTSERVICE'.
Error: The operation has timed out
On the server's event viewer under system I get the following error ->
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Any idea of what could be going on? Did I miss something on the installation?
After this I also tried installing everything but without iis and I get the same error.
So, this is really not a PoSH issue.
Maybe you should consider movin gthis question to another forum.
Anyway, you have either real server config issues (this can sometimes mean wipe and rebuild - very ugly option - but if it's a virtual machine and you have a snapshot, just roll back), or an app causing this.
Typically for Schannel type of error, it has to do with application or service in machine not able to complete any SSL connection sort of connection.
The error state parameter of 1203 means client error connecting to server, ie invalid ClientHello from the client
See if you can collect more data by...
https://support.microsoft.com/en-us/help/260729/how-to-enable-schannel-event-logging-in-iis
I realized this is an old question, but in case somebody ran into the same issue, here are my solution.
I had to follow this guidelines : https://learn.microsoft.com/en-us/aspnet/web-forms/overview/deployment/configuring-server-environments-for-web-deployment/configuring-a-web-server-for-web-deploy-publishing-web-deploy-handler
Copy the resulting publishsetting file. In the Publish/Profile page import it.
In the Publish/Connection page, change the server to the server address with the 8172 port. Add the password. Change the Destination URL to the site to go to after the publish is completed.
Then after Validate connection was completed, go ahead and publish it!
I have downloaded opshub tool for the migration, trying to migrate from on premises to visualstydio team service. Getting error On the migration summary page with error message:
"Unable to communicate with the required process opshubtfsservice.Because probably it is not running. Restart application & try again"
I verified the opshub service is running as local service. I tried to restart & tried with Network service/local account etc. But no lock.
Can you please help me on this here.
Thank you.
It seems that your machine is behind a proxy and all traffic in-out is being routed through it. (Including the communication of local traffic)
You will have to bypass local addresses from the proxy as well as enable OVSMU to communicate through the proxy.
Please refer the C:\Program Files\OpsHub Visual Studio Migration Utility\Other_Resources\Resources\ProxyUtility.zip to configure OVSMU to utilize your proxy. There should be a user guide document which lists the steps.Keep the bypass local address value as default.
I posted on friday regarding this issue and received no response, however since then some updates have occurred which might affect whether people have an answer to my question or not.
I'm trying to deploy an MVC website to Azure, and in this particular project the web deploy receives a Socket Error 10054 and gives up after 10 attempts saying it was Unable to write data to the transport connection. It makes varying progress in between the socket failures but never completes within the 10 attempts.
I have since had a play around with other projects which are deployed to different url locations within this same Azure Account and they deploy fine! I think this means the problem is not on my end, i.e. port 8172 is open and deployment can be achieved with my current local settings.
What are the problems that can cause this socket error 10054? I saw somewhere that I should enable the "Allow untrusted certificate" option when deploying but I can't find that option within VS 2013.
Any ideas are welcome please,
This issue is driving me mad, it seems there's a real mixed bag of solution ideas which have worked for others but not me.
JK
I have a remote developer connected to my TFS via the internet. When he attempts to do a GET from source control, he fails to get a number of files with error messages as this:
D:\CaseTrakker\CaseTrakker_v6_0\CaseTrakker\CaseTrakker.ObjectModel\Framework\Factories\Value\LookupValueViewModelFactory.cs: Please contact your administrator. There was an error contacting the server.
Technical information (for administrator):
HTTP code 302: Moved Temporarily
This does not happen for all files, but for many, and repeated retries does not resolve it. I am at a complete loss.
Possibly germane, the way that I have published my TFS is to set up a rule in my firewall to route requests targetting http://publicserver:8080/tfs to http://internalserver:8080/tfs. Since this error seems to have to do with redirection, that might be some or all of the issue.
Thanks in advance for any assistance.
David Mullin
IMA Technologies
Might be worth getting the external developer to upgrade to the latest Update 3 CTP of VS 2012 as there was a fix in it to handle retries better on downloads.
However, you'll probably have more luck if you configure it so that your TFS server is accessible over the same fully qualified domain name both internally and externally (internally resolving to the internal IP - externally resolving to your external IP). Check out this word document for more information (http://www.christiano.ch/common/documents/Exposing_Team_Foundation_Server_to_the_Internet.docx) or take a look at the Pro TFS 2012 book.
We have an application server with the following spec’s:
• Windows 2008 R2 operating system.
• All prerequisites are configures successfully and correctly: Windows roles, MSDTC and connection to SQL DB server.
• MS Reporting Services 2008 R2 are installed and configured successfully, and all reports are deployed and render with no problems.
The application server connects to SQL Server 2008 R2 DB on different server - there are no firewalls between the 2 servers , and using UDL file, the connection is always successful using windows authentication or SQL authentication on SQL Server.
When we install “K2 blackpearl 4.5 (4.10060.1.0) with Update KB001040”, the setup completes successfully but the following exception appears when we open work list, when K2 setup manager is opened for reconfiguration and when rendering any report on the report manager: “A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)” although all DB’s are created successfully during the installation for K2. Also all other features at K2 (any feature at Management Console) and Report Manager (deployment of reports, management of data sources, and folder/report settings) works perfectly.
When we remove K2 components from the server the reporting services works successfully again, without any reconfiguration.
We tried to move the server to new environment to check if there is a problem with the server itself, all installation and configuration are completed with no problems and the error message disappeared.
We did check all of below points:
• MSDTC configuration.
• All ports are open between the 2 servers.
• SQL connection is always successful between the 2 servers.
• We have a third server with MOSS 2007 installed and it works perfectly with problems in connection to DB.
• All users used for windows services and SQL windows connection are active and configured correctly.
o Have SQL login with dbcreator and SecurityAdmin roles.
o Are added as Administrators on Application server.
• We have tries Windows authentication and SQL authentication and they all gave the same problem.
• We have used a newer version of K2 installation files “K2 blackpearl 4.5 (4.10060.1.0) with KB001320” and it failed at the last steps of installation with the same problem.
Please help on this.
(full disclosure i work for K2) and looked through our system as well as the support forum and could not find a reference to this error. From the people i talked to it appears to be a general network issue, with quite a few possible causes, including something as simple as the network card. Although I am not 100% clear on a few points you made. When you said
"following exception appears when we open work list" Where are you opening the worklist from?
When you said
"When we remove K2 components from the server the reporting services works successfully again, without any reconfiguration."
Are you getting this error in SQL Reporting Services?
You can also post a question in http://k2underground.com someone else may have seen this.
Edit I asked around and there does not seem to be any good answers to this at the moment. Would you be willing to open a K2 support ticket and let us look at the K2 logs or see the config via livemeeting? Thanks!