So https://technet.microsoft.com/en-us/library/cc771254.aspx describes the /d parameter of the xcopy command as allowing you to only copy the source file changed on or after the specified date, so I wanted to use the underneath command but with the current date. Does anyone know how to get the current date in batch and properly format it within the below command?
xcopy /d [:MM-DD-YYYY]
#echo off
for /F "usebackq tokens=1,2 delims==" %%i in (`wmic os get LocalDateTime /VALUE 2^>NUL`) do if '.%%i.'=='.LocalDateTime.' set ldt=%%j
set yyyy=%ldt:~0,4%
set mm=%ldt:~4,2%
set dd=%ldt:~6,2%
echo xcopy source destination /D:%mm%-%dd%-%yyyy% /L
remove echo in front of xcopy, edit source and destination. /L is to list only, no destructive command.
Related
I have multiple files with dates on them I would like to strip.
exOpTimer01232018.txt
exOpProcess01232018.txt
exOpFac01232018.txt
exOpProd01232018.txt
I would like to have a batch script remove the date and leave result such as
exOpTimer.txt
exOpProcess.txt
exOpFac.txt
exOpProd.txt
These are monthly file and the date stamp changes every month.
I have tried doing
RENAME C:\temp\*????????.txt *.txt
But wasn't successful.
Example based on my comment:
#Echo Off
For /F "Delims=" %%A In ('Where .:exOp*.txt 2^>Nul') Do Call :Loop "%%A"
Pause
Exit
:Loop
Set "fName=%~n1"
Ren %1 "%fName:~,-8%%~x1"
I would like to robocopy a directory and it's subdirectories to another directory. If a file at source is newer then I would like to make a copy of this file by adding a date/time stamp at end of the filename at destination and do the copy to destination.
I do not see any switches in the robocopy to do this. Can someone guide me how to do this.
Robocopy doesn't have a renaming switch, but you can use the rename command on the resulting files to add timestamps. Here's an example batch file:
#echo off
for /f "tokens=1-3 delims=. " %%a in ('date /t') do (set mydate=%%c-%%a-%%b)
for /f "tokens=1-2 delims=/:" %%a in ("%TIME%") do (set mytime=%%a%%b)
dir Directory1\ /b > list
robocopy Directory1\ Backup\
for /f %%f in (list) do rename Backup\%%f %%~nf%mydate%_%mytime%%%~xf
Note that you will need to change the delimiters of the date depending on which country standard you follow. You can get that by executing date /t
I'm trying to figure this out need some help. I need to make a program that copy's my Log file and rename with date and time to different directory. Prior to loading the program not sure how to do it if any help would be great.
Here's a batch file that will copy all log files to an archive folder appending the date to each:
#Echo Off
#For /F "tokens=1,2,3 delims=/ " %%A in ('Date /t') do #(
Set Day=%%A
Set Month=%%B
Set Year=%%C
Set All=%%C%%B%%A
)
#For %%a in ("*.log") do copy %%a "archive\%%~na_%All%.LOG"
I can't seem to understand how batch files add yyyy/mo/dd/hh/mm/ss to the beginning of filenames. (Using Windows 7) Accuracy to the second is important.
It doesn't actually have to be a batch file, it just has to be a small program which can be executed by Directory Monitor whenever I add files to a folder: http://brutaldev.com/page/Directory-Monitor.aspx
I only imagine that a batch file would be the simplest and most efficient approach, but any other suggestions are welcome.
I work with many sequentially numbered files with overlapping filenames and I need a quick way to rename them whenever I add them to a folder such that there will never be any file with the same name yet they will still remain in sequential order. This is how I thought of adding the current date and time to the beginning of the filename and why seconds are important, since I can easily add multiple sets to a folder in under a minute but certainly not under a second. It would be ideal if the batch file could ignore file extensions and simply add the current date/time to the beginning of any file added to the folder.
The first four lines of this code will give you reliable YY DD MM YYYY HH Min Sec variables in XP Pro and higher.
#echo off
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set "YY=%dt:~2,2%" & set "YYYY=%dt:~0,4%" & set "MM=%dt:~4,2%" & set "DD=%dt:~6,2%"
set "HH=%dt:~8,2%" & set "Min=%dt:~10,2%" & set "Sec=%dt:~12,2%"
set "datestamp=%YYYY%%MM%%DD%" & set "timestamp=%HH%%Min%%Sec%" & set "fullstamp=%YYYY%-%MM%-%DD%_%HH%-%Min%-%Sec%"
echo datestamp: "%datestamp%"
echo timestamp: "%timestamp%"
echo fullstamp: "%fullstamp%"
:: this line will rename the files in the current folder which haven't already
:: been renamed by checking for the fullstamp format at the start of the line
:: but it will skip this batch file
for /f "delims=" %%a in ('dir /b /a-d ^|findstr /v "^[0-9]*-[0-9]*-[0-9]*_[0-9]*-[0-9]*-[0-9]*" ') do if /i not "%%a"=="%~nx0" ren "%%a" "%fullstamp% - %%a"
pause
#ECHO off
SETLOCAL
IF [%1] NEQ [] goto s_start
:: Author - Simon Sheppard, July 2003
:: Tested for Windows NT, 2K, XP
ECHO STAMPME.cmd
ECHO REName a file with the DATE/Time
ECHO.
ECHO SYNTAX
ECHO STAMPME TestFile.txt
ECHO.
ECHO STAMPME "Test File.txt"
ECHO.
ECHO STAMPME "c:\docs\Test File.txt"
ECHO.
ECHO In a batch file use CALL STAMPME ...
:: To change the filename format just change around the last line below
GOTO :eof
:s_start
SET _file=%~n1%
SET _pathname=%~f1%
SET _ext=%~x1%
::Get the date
:: note ISO 8601 date format would require 4 digit YYYY Year)
FOR /f "tokens=6-8 delims=/ " %%G IN ('NET TIME \\%computername%') DO (
SET _mm=%%G
SET _dd=%%H
SET _yy=%%I
)
:: Get the time
FOR /f "tokens=2-4 delims=:." %%G IN ('cmd /c "time<nul"') DO (
SET _hr=%%G
SET _min=%%H
SET _sec=%%I
GOTO :done
)
:done
ECHO Today is Year: [%_yy%] Month: [%_mm%] Day: [%_dd%]
ECHO The time is: [%_hr%]:[%_min%]:[%_sec%]
REN "%_pathname%" "%_hr%-%_min%-%_sec%#%_file%%_ext%"
This seems to work for me
I'd prefer solutions, that are not dependent to local settings (wmic gives always the same format):
#echo off
setlocal EnableDelayedExpansion
for %%a in (a.*) do (
for /f %%i in ( 'wmic os get localdatetime /value ^|find "Local"' ) do set %%i
set ldt=!LocalDateTime:~0,4!-!LocalDateTime:~4,2!-!LocalDateTime:~6,2!-!LocalDateTime:~8,2!-!LocalDateTime:~10,2!-!LocalDateTime:~12,2!-!LocalDateTime:~15,3!
echo seconds ### ren %%a !LocalDateTime:~0,14!%%a
echo milliseconds ### ren %%a !LocalDateTime:~0,18!%%a
echo with separator ### ren %%a !ldt!-%%a
)
#ECHO OFF
SETLOCAL EnableDelayedExpansion
REM Set variables
SET SOURCE=C:\My WebEx Recordings
SET DEST=\\XXXRD12\c$\WebExVideoArchive
SET 7ZIP=C:\Program Files\7-Zip\7z.exe
REM Compress local files with 7zip
ECHO ---------------------------------------------------------
ECHO BEGINNING VIDEO COMPRESSION OPERATIONS
ECHO ---------------------------------------------------------
CD /D "%SOURCE%"
FOR %%f in ("*.wrf") DO (
SET FILENAME=%%~nf
ECHO Compressing !FILENAME!
"!7ZIP!" a -t7z -aoa "!FILENAME!.7z" "%%f"
)
REM Copy compressed files
ECHO ---------------------------------------------------------
ECHO COMPRESSION COMPLETE - BEGINNING COPY OPERATIONS
ECHO ---------------------------------------------------------
REM XCOPY <source> <destination> <options>
XCOPY "%SOURCE%\*.7z" "%DEST%" /Y /V /I /R
REM Confirm successful copy, then delete originals
IF %ERRORLEVEL% EQU 0 (
ECHO Copy Operation Successful. Removing Originals...
DEL /Q "%SOURCE%\*.*"
)ELSE (
ECHO Error Detected During Copying. Please try again...Press Any Key to Exit
Pause
)
I am trying to edit this code to when we run the batch file it creates a folder based off the month of our file format. We ran this script a whole lot but forgot to make a folder called April now we have May mixed in with April.
The files are formatted like
Username-R705-2011.05.04-1601-Disconnected.7z
I was wondering if there is anyway it can go off the .04 and make a folder for that month so it will automatically put it in the folder it is needing to go into, so it will be easy to search for by month.
** would it be possible if we can not use the format that we format our files in to have it sort by file creation.
Erase everything below (and including) the line REM XCOPY <source> <destination> <options> and replace it with the following:
for /F "usebackq delims=" %%a in (`dir /b "%SOURCE%\*.7z"`) do (
SET CURRENT_FILE=%%a
REM Extract the month.
for /F "usebackq tokens=3 delims=-" %%i in ('!CURRENT_FILE!') do (
SET CURRENT_FILE_DATE=%%i
SET FILE_MONTH=!CURRENT_FILE_DATE:~-2!
SET MONTH_DEST=!DEST!\!FILE_MONTH!
)
XCOPY "%SOURCE%\!CURRENT_FILE!" "!MONTH_DEST!\" /Y /V /I /R
REM Confirm successful copy, then delete original
IF %ERRORLEVEL% EQU 0 (
ECHO Copy Operation Successful. Removing Original...
DEL /Q "%SOURCE%\!CURRENT_FILE!"
)ELSE (
ECHO Error while copying "%SOURCE%\!CURRENT_FILE!.
)
)
This code goes through every file matching %SOURCE%\*.7z, extracts the month, and then copies the file to %DEST%\<month>. Month is just the 2-digit number from the filename.
Seems like you have a folder full of files with different numeric-month values embedded in the filename. I was thinking of extracting that value from each file, but it would be more straightforward to use brute force wildcards with 12 different XCOPY commands:
XCOPY "%SOURCE%\*-*-20??.??.01-*.7z" "%DEST%\01" /Y /V /I /R
XCOPY "%SOURCE%\*-*-20??.??.02-*.7z" "%DEST%\02" /Y /V /I /R
[...]
XCOPY "%SOURCE%\*-*-20??.??.12-*.7z" "%DEST%\12" /Y /V /I /R
I may be misunderstanding the question but if you can make some assumptions about the filenames, this would work.