When I use DataTable in client-side mode (on an existing table), only the displayed rows are inserted in the DOM (I use the paginator). This is annoying as my table displays a form, so the hidden rows aren't sent when I submit the form.
Is it possible to only hide the rows and not remove them from DOM ?
I didn't test it yet but the documentation says there is an API, from which we can get the whole form content and even modify the form - even rows that aren't displayed - so that answers my question.
Related
I need to change two columns in a Sales Order's item line section (bottom of the page) in NetSuite: https://i.ibb.co/27vx9Dr/2019-06-20-10-41-13-Window.png
It feels like the solution ties these two together as they are both perceived as item line fields or "Sublist Fields" (according to NetSuite's customization form page).
INVENTORY DETAIL needs to be enabled or set to "normal" so I can be able to specify bins associated from my selected item or be able to interact and fill in this column at the basic level.
AMOUNT needs to be set as "inline-text" so that other people handling sales orders cannot disturb it at all and still be able to see the value of this particular column.
I have attempted to search through Customization > Lists, Records & Fields and searched the following options: (which I thought were relevant to the fields that I wanted to modify)
Item Fields to no success
Transaction Body Fields to no success
Transaction Line Fields found out that AMOUNT and INVENTORY DETAIL are both padlocked
I also attempted to search through Customization > Forms and I have spent a long time looking through my Sales Order custom transaction form (possibly missing out on menus unintentionally) to no success.
I know that inside Customization > Forms > Entry Forms there is an Inventory Detail form in there that shows exactly the window I'm expecting, but I haven't figured out how to customise anything in the columns item line for transaction forms yet so I can create a custom column containing a link to INVENTORY DETAIL simulating the typical behavior of the original one while hiding the disabled one.
Near the top of a Sales Order form, I went to Customise > Customise Form and found out that I can find both AMOUNT and INVENTORY DETAIL inside the Sublist Fields tab.
Unfortunately, it only has SHOW toggles and this does not do what I need for it to do.
It is clear that I am confusing Sublist Fields with Screen Fields where I expected there would typically be a DISPLAY TYPE column that bears the drop-down selections containing "Normal", "Inline-Text" and "Disabled" options.
In actuality, they have SHOW checkbox toggles for both INVENTORY DETAIL and AMOUNT where the AMOUNT checkbox is greyed out. (This still does not achieve or reflect what I need it to do)
I am unaware of the conditions that needs to be met for AMOUNT to behave as an inline-text. There is probably another condition that needs to be met for the INVENTORY DETAIL column to be made available somehow.
I admit that I missed something crucial, so please kindly mention about it.
Any help would be greatly appreciated.
I was able to create a new column by creating a Transaction Line Field that contains two separate fields which are applied to Sales Orders.
For the INVENTORY DETAIL, I went to Customization > Entry Forms and copied the link for "Standard Inventory Detail Form" and then produced my own HTML code inside the Default Value when creating a new Transaction Line Field.
For AMOUNT, I created a new transaction line field and then set the Default Value as the appropriate value found in https://system.netsuite.com/help/helpcenter/en_US/srbrowser/Browser2018_1/schema/record/billingaccount.html and I used the curly bracket notation {} to fetch the data for the edittable AMOUNT but changed the Access to View-only, which makes this exactly what I needed.
After previewing the changes into an existing Sales Order, I can see my results reflected as expected. Consider this question solved.
I had search some relative question which had been asked, but seem not too much my condition.
My problem is simpler to this problem
Table in iTextSharp is not page breaking as desired?
The different between my problem and his is I need header in each extend page.
Currently I put a long table in one of cell, it make me has header in each page, but if the table to long, all table will shift to second page, and first page is empty.
I have tried table.KeepRowsTogether, but the 15 rows stay in second page and rest in third..
I determine what is the length of list. if number of items more than 15 then I separate list into 0 ~ 14 and 15th to the end, keep all content in the same table then there will having header in second page. Case close
I am trying to display a list of open indents with check boxes before them each line. Based on the selection a report will be generated next with further details.
Table: xxind_mstr (xxind_nbr, xxind_shipto, xxind_askedby, xxind_date).
Is there any way that I can bring the records from xxind_mstr and place them in the FORM with check boxes ?
Note: This only works if dynamic. Never hardcode this approach.
Name each check box with the value of ROWID(xxind_mstr).
This way on the post you can read back through the each xxind_mstr getting the value of the the rowid.
Rod
I'd like some more info, just to know if I'm not talking rubbish here. You want to display the records in xxind_mstr as checkboxes, then upon selection of the report setup, fire the report respecting the checkboxes flagged? If so, then I'd use a browse pre-built with a temp-table containing the xxind_mstr records, and a "flagged" field, this being a logical view-as checkbox, and when they run the report, do a
FOR EACH ttxxind_mstr WHERE flagged = true, and you should have what you want.
Is there any way to find the current page is going to end in iTextSharp. For example,
say there are some 10 records which needs two pages to be written down at the end of the first page i wish to add '(contd on nex page'). IS there a way to do this. Will finding the end of page be an answer for this or is there a way to find the line number on which writing is done, so that i can make a calculation to decide whether to add a message of my choice and proceed to the next page.
any advise is much appreciated :)
Thanks a zillion
Usually, this is done by defining a footer for the table. When the table breaks automatically, iText will show that footer. Of course: you don't want this footer to show up on the last page (after the final row of the table). That's why there's also a method to skip the last row.
This example shows you how to create a table with headers and footers. This is the link to SkipLastFooter.
Note that saying that "finding the line number" would solve your problem is wrong for two reasons:
There is no such thing as a line number in a PDF file. You have a MediaBox and you draw content on the canvas defined by the MediaBox using coordinates.
There's a way to get the current Y-position on a page after adding an object to a document. You can get the Y-position before adding a table and after adding a table, but not while you're still creating the table.
An alternative solution to the one I suggested above, woult be to use table events.
If you really need to find the end of the page, and are not using a table with a footer row that will be printed at the end of each page, you can use the PdfWriter object as follows:
var remainingPageSpace = pdfWriter.GetVerticalPosition(false) - pdfDocument.BottomMargin;
This will give you the remaining space on the page, from which you can determine what you want to do next.
If you are using tabular data however, it is much preferred to use a PdfPTable and take advantage of the footer row feature.
I'm using a form for edit some records. Each time When Edit link is clicked i'm loading one record data into form, changing the values and updating, its worked fine for the first time.
When i load another record data into form and update it, the present record is updating and the previous record is also updating with the new data.
If i update 3 rows after that when updated the 4th row, 4th row and previous 3 are updating with new data entered for 4th row.
I think form is submitting multiple times,
I used form reset property each time loading the values, but its not worked.
How to do this Please help me
Are you holding your formpanel into a Ext.Window component ? Check if the window is actually closed or hidden. Try putting closeAction: 'close' in your window config.