I am trying to display a list of open indents with check boxes before them each line. Based on the selection a report will be generated next with further details.
Table: xxind_mstr (xxind_nbr, xxind_shipto, xxind_askedby, xxind_date).
Is there any way that I can bring the records from xxind_mstr and place them in the FORM with check boxes ?
Note: This only works if dynamic. Never hardcode this approach.
Name each check box with the value of ROWID(xxind_mstr).
This way on the post you can read back through the each xxind_mstr getting the value of the the rowid.
Rod
I'd like some more info, just to know if I'm not talking rubbish here. You want to display the records in xxind_mstr as checkboxes, then upon selection of the report setup, fire the report respecting the checkboxes flagged? If so, then I'd use a browse pre-built with a temp-table containing the xxind_mstr records, and a "flagged" field, this being a logical view-as checkbox, and when they run the report, do a
FOR EACH ttxxind_mstr WHERE flagged = true, and you should have what you want.
Related
I need to change two columns in a Sales Order's item line section (bottom of the page) in NetSuite: https://i.ibb.co/27vx9Dr/2019-06-20-10-41-13-Window.png
It feels like the solution ties these two together as they are both perceived as item line fields or "Sublist Fields" (according to NetSuite's customization form page).
INVENTORY DETAIL needs to be enabled or set to "normal" so I can be able to specify bins associated from my selected item or be able to interact and fill in this column at the basic level.
AMOUNT needs to be set as "inline-text" so that other people handling sales orders cannot disturb it at all and still be able to see the value of this particular column.
I have attempted to search through Customization > Lists, Records & Fields and searched the following options: (which I thought were relevant to the fields that I wanted to modify)
Item Fields to no success
Transaction Body Fields to no success
Transaction Line Fields found out that AMOUNT and INVENTORY DETAIL are both padlocked
I also attempted to search through Customization > Forms and I have spent a long time looking through my Sales Order custom transaction form (possibly missing out on menus unintentionally) to no success.
I know that inside Customization > Forms > Entry Forms there is an Inventory Detail form in there that shows exactly the window I'm expecting, but I haven't figured out how to customise anything in the columns item line for transaction forms yet so I can create a custom column containing a link to INVENTORY DETAIL simulating the typical behavior of the original one while hiding the disabled one.
Near the top of a Sales Order form, I went to Customise > Customise Form and found out that I can find both AMOUNT and INVENTORY DETAIL inside the Sublist Fields tab.
Unfortunately, it only has SHOW toggles and this does not do what I need for it to do.
It is clear that I am confusing Sublist Fields with Screen Fields where I expected there would typically be a DISPLAY TYPE column that bears the drop-down selections containing "Normal", "Inline-Text" and "Disabled" options.
In actuality, they have SHOW checkbox toggles for both INVENTORY DETAIL and AMOUNT where the AMOUNT checkbox is greyed out. (This still does not achieve or reflect what I need it to do)
I am unaware of the conditions that needs to be met for AMOUNT to behave as an inline-text. There is probably another condition that needs to be met for the INVENTORY DETAIL column to be made available somehow.
I admit that I missed something crucial, so please kindly mention about it.
Any help would be greatly appreciated.
I was able to create a new column by creating a Transaction Line Field that contains two separate fields which are applied to Sales Orders.
For the INVENTORY DETAIL, I went to Customization > Entry Forms and copied the link for "Standard Inventory Detail Form" and then produced my own HTML code inside the Default Value when creating a new Transaction Line Field.
For AMOUNT, I created a new transaction line field and then set the Default Value as the appropriate value found in https://system.netsuite.com/help/helpcenter/en_US/srbrowser/Browser2018_1/schema/record/billingaccount.html and I used the curly bracket notation {} to fetch the data for the edittable AMOUNT but changed the Access to View-only, which makes this exactly what I needed.
After previewing the changes into an existing Sales Order, I can see my results reflected as expected. Consider this question solved.
!https://i.imgur.com/tfr0N27.png "Qlik Layout"
So I have this screen and I would like to make it so the user can choose the amount of each selected item. I would also like for the KPI to show 0 if nothing is selected. Any ideas?
I'll try Measure like this:
IF(GetSelectedCount(ProductName)>0,SUM(ListPrice), 0)
The amount of item can be set using input boxes. Problem is input box is per variable so you would have to define input boxes for each product and then make long list... even for that you need input box extension from Qlik Branch. In Qlikview there is functionality to add inputSum function in table which could be perfect in your case but is not implemented in QLikSense. If it is really necessary you can create own extension in Qliksense with html table of all products and form which is updating variables.
I'm new to SSRS. These may be very trivial questions.
I've a SSRS report, which shows employees in row by row format. Is there any way that I can double click on a row and get the corresponding employeeID of the row. And another question is can I have check boxes in each of the rows so that I can do something based on the rows that was checked? Please help.
Thanks in advance.
To your first question regarding dynamically hiding and showing the employeeid, you would want to use the Visibility property on the employeeid column,row or textbox and set visibility to "HIDE" and check "Display can be toggled by this report item" This will allow you to interactive show/hide the data.
Toggled Item Example
Another quick and easy option would be to set the tooltip property of one of the employee textboxes to
=Fields!EmployeeID.Value
This would give you the employeeid without clicking anything, just hovering over the field.
For your second question about checkboxes, the easy answer is no, it's not built-in to do that. But I have seen interactive "game" reports that run stored procedures to update data as you click on textboxes (which you could make to appear as checkboxes) and drill-through to itself to show refreshed data, but it's more of a hack than actual functionality. Here's a link to one of the examples I've seen.
http://blogs.msdn.com/b/robertbruckner/archive/2009/05/20/multi-player-gaming-in-rs-aka-bi-power-hour-2008.aspx
I have a combo box which is of a lookup type, i.e., I've selected the source to be a column from a table and am storing the selected value in another table. The table which I am looking up has another column and I need the value in this column to be displayed in a text box and each time I change the value in the combo box, I need the corresponding value to be displayed in the text box. How can I do this? What I have done so far is to write a Select query that selects the appropriate column based on the combo box's value. Is there a more decent way of doing this? Please help me!
Make the source of the combo box to your 2 fields e.g. SELECT id, name FROM Customers
Make sure you set the Column Count property of the combo to 2, accordingly.
Then make you unbound text box source equal to =MyCombo.Column(1) (from memory, this Column is zero based).
That's it, zero code required.
It's nicer to use an event of the combo box e.g. onChange, so when a selection is made the event sets the value of the text box.
me!txtTextBox1 = me!cboComboBox1.column(1)
That way it will work everytime.
You could also use a button with onClick etc. but the choice is yours (and as mentioned in the previous post, alter the column number based on its row source with 0 being the first.
After reading the question and answers I tried the following, and it seems to work well (so far):
In order to display more than one column of a combobox selection, I have resorted to the following:
Place a textbox over the combobox,
Size it by sampling other fields, so that it covers the text frame of the combobox.
I have purposely have left a small space to the right of the NEW textbox to indicate that it
Is NOT part of the combobox.
In the Control Source for the textbox enter the expression below:
=[DefaultAcct].[Column](1) & " " & [DefaultAcct].[Column](2)
Then, in the ‘onchange’ event of the combobox, set focus to the textbox.
Private Sub DefaultAcct_Change()
txtConcatenate1.SetFocus
End Sub
I am already using Filemaker Pro 10, I have two questions:
I have a text field in a portal, and whenever I am entering values like "B12C45" in it, it works well, but when the string is longer like "BC12F42, B45z87" it doesn't show whole the strings and omits the letters from it. what Can I do?
My second question is that: I have a portal in a layout, in this portal every row has an id sometimes the id is repeated in other rows but the value of another field called Position is changing. Now I want to have those rows of this portal which have the same id in another layout. I have tried using scripts for it, but scripts don't work well in this case, and they are entering whole the portal in the new layout not the parts I want . How can I write a script which does this?
I will really appreciate any help.
For the first question there are many ways you could display more data in a field and the best one will depend on the particular implementation in your database. There are three main ways to solve this problem: field-size adjustments, text-size adjustments and programming adjustments to dynamically change the text-size.
Field-size adjustments include:
Making the field longer
Using the autosizing aspect of a field so that as the window grows, so does the field
Text-size adjustments include:
Making the font size for that field smaller.
Setting the font style for that field to condensed.
Programatically, though, three things stand out to me as possibilities. I like the third one the best for most of my solutions:
Set the tooltip for the field to "Self" (without the quotes). A user can see the entire contents of the field by hovering the mouse over the field.
In "Define Database" set the field's calculated value to: "TextStyleAdd(self;Condense)" (without the quotes) and make certain that "Do not replace existing value of field" is turned off
Use Conditional formatting to add the Condense style or use a smaller font when the number of the characters in the field gets long.
The steps for using conditional formatting are as follows:
In layout mode select the field and select 'Conditional Formatting...' from the pop-up menu
Add a new condition
Change the condition to 'Formula is'
In the text field enter "Length(Self) > 8" (without the quotes)
Press the "More Formatting..." button
Select "Condense" as the Style from the text
You can add multiple conditions, so you might have "Condense" only for Length(Self) > 8 and another condition for Length(Self) > 16 where you set both "Condense" and reduce the Font Size.
As for your second question, I'm not able to get a picture of what you're trying to do from the question you asked. You might be able do the following in a script:
Go to Related Record [the portal relationship]
Sort Records [by ID]
And then use a summary field (Count of ID) to determine how many of each ID you have.
If you clarified what you were trying to do, gave more information about your tables and table occurrences, we might be able to provide a better answer for this instance.