I have hosted the jorani Open Source LMS, under local server and after logging in, redirects me to home page (http://localhost/lms/home), but I get a 404 - File or directory not found. error.
What can I do to fix this? I know I need a server configuration but I don't know what. Thanks
It seems that you didn't activate the rewrite module.
Jorani contains a page at the root of the installation (e.g. http://localhost/lms/requirements.php) that checks your system and tell you what is missing.
You should read the manual of installation.
Related
I have a ZF3 project with a controller which opens excel-files and compares them with an template which will be openened, too.
On my development notebook (xampp) everything works fine, at my production system (ubuntu) the phpspreadsheet causes errors (I think it is the one).
here a snippet from my code:
$fileName="./public/files/" . $fileName; //.\ neu
echo $fileName;
$template= new Spreadsheet();
$importdcl= new Spreadsheet();
$template= \PhpOffice\PhpSpreadsheet\IOFactory::load('./public/files/Template_DCL_final.xlsx');
$importdcl= \PhpOffice\PhpSpreadsheet\IOFactory::load( $fileName);
echo "filename geladen";
I already have the folders in non relative paths because basePath() doesn't work, it won't give any result.
The echo statement is just because the server log won't give any errors. On my development system I get the echo text on my production system the error seems to be at the load statements.
First question: How could I use relative paths in here?
Second question: How can I get an idea wether is something wrong with the spreadsheet class?
This is what composer loaded:
"phpoffice/phpspreadsheet" : "dev-develop",
Is it a problem, because it has this dev version? At this point I'm quite confused because I played with the pathes of the files, I changed the rights manually in the folder, I checked server logs and now I don't have any idea left.
Here the rights in the folder:
Any helpful suggestions appreciated.
Answer (hopefully) to the first question: if your application is based on ZendSkeletonApplication, then you can use paths relative to your application root (from index.php):
/**
* This makes our life easier when dealing with paths. Everything is relative
* to the application root now.
*/
chdir(dirname(__DIR__));
So if your data files are located in <application root>/public/files, then you should be able to read them from controller/service/etc. using public/files/<file name> path. You can test it with eg. the file_exists function.
I’m unable to answer your second question, but here are some suggestions (OK, questions…):
what is the status code of your (production) server’s response?
Do you have read/write permissions to the data files from the server’s account (www-data?)?
Does phpspreadsheet depend on any PHP extensions? Do you have them installed on both your development machine and the server?
What PHP version is installed on the server? Do you or phpspreadsheet use any features that may be unavailable on that version?
Try running your project not through Apache, but with PHP’s builtin server (but don’t do it long-term) and try to reproduce the issue.
I have, in order to process some big data, to set up ckan on a local machine. I've set up the whole system following this guide : http://docs.ckan.org/en/latest/maintaining/installing/install-from-source.html
I wanted to display a preview of a locally loaded file, so the user can actually see it before downloading it. And it doesn't work, because it only works for online files. For instance, it DOES work with this online file but NOT with my own file I upload.
So, I've been interested about Datastore and Datapusher. I've followed every part of the guide, and it appears on my ckan. However, I have an error. Specifically this one :
Upload error: An Error occurred while sending the job: 403 Client Error: Forbidden for url: http://127.0.0.1:8800/job
Here's my most important parts about my production.ini file (copying the whole would be very long) :
ckan.site_url = http://localhost
ckan.plugins = datastore datapusher stats text_view image_view
recline_view recline_graph_view recline_map_view webpage_view
ckan.datapusher.formats = csv xls xlsx tsv application/csv
application/vnd.ms-excel
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
ckan.datapusher.url = http://127.0.0.1:8800/
I truly have no idea about what my problem could be, I tried to change the datapusher.url to 0.0.0.0 as the guide suggested, but it doesn't work either.
If the data to be added to CKAN is in a file on your computer, select “Upload a file” option. CKAN will give you a file browser to select it. You should use link to a file option just for publicly available resources.
Have you installed datapusher also? Its a separate process running on port 8800. CKAN uses datastore to be able to have a grid view of tabular data. Data needs to be pushed through datapusher to be used by datastore.
Yes, you need to set up the Datapusher.It's not activated by default.
Pull the datapusher code, install the dependencies and run it using:
python datapusher/main.py deployment/settings.py
The instructions to configure the settings are on the repository.
Here's the datapusher manual: http://docs.ckan.org/projects/datapusher/en/latest/
Here's the repository: https://github.com/ckan/datapusher
Had the exact same error message.
This post solved my issue though.
short: insert/check the following in your virtualhost in /etc/apache2/sites-enabled/datapusher.conf
<Directory /etc/ckan>
Options All
AllowOverride All
Require all granted
</Directory>
I’ve a shared hosting account and installed SugarCRM. Everything is fine except the message i get for the module loader. Here i get the message to add suhosin.executor.include.whitelist = “upload://” to the php.ini file.
The message is:
Upload stream is blocked by Suhosin, please add "upload" to
suhosin.executor.include.whitelist (See sugarcrm.log for more
information)
Because i have a shared hosting account i don’t have access to my etc map and therefore also not to my php.ini file.
I want to use the .htaccess file for this but don't know exact code. Can anyone help me?
You Can Try Add this to your .htaccess file as suggested in http://forums.sugarcrm.com/f6/upload-stream-blocked-suhosin-82116/
<IfModule mod_php.c>
php_value suhosin.executor.include.whitelist upload://
</IfModule>
In my case I'm using php-fpm so I modified the php.ini locater in /etc/php5/fpm/conf.d/suhosin.ini and I have no more warnings from SugarCRM
; configuration for php suhosin module
extension=suhosin.so
suhosin.executor.include.whitelist="phar"
suhosin.executor.include.whitelist="upload"
The solution posted by Carlos Quijano didn't work for me.
I've found that the solution is different depending if PHP is run as module, CGI or FASTCGI .
This is the documentation I've found about the different methods you can use to use a custom php.ini file for your domain (or even subdomains)
First you should check which one is your case.
For this, you can use the phpinfo command:
Create a php file called phpinfo.php with this content: <?php phpinfo(); ?>
and upload it into your domain root, then visit www.yourdomain.com/phpinfo.php,
you'll see a table and next to "Server API" you'll see which way PHP is run.
For me it was "CGI/FastCGI", so I had to get a copy of the global php.ini, which I didn't know how to get since it was not accessible by FTP access. I've found a solution in a Drupal forum:
Create a php file you can call gettheini.php with this content:
<?php system("cp /usr/local/php5/lib/php.ini /home/YOURCPANELUSERNAME/php.ini"); ?>
*The first path must be the path next to "Configuration File (php.ini) Path" in the table obtained before (phpinfo.php), with php.ini at the end. The second path is the path where you want to copy it to.
Upload it into your domain root, then visit www.yourdomain.com/gettheini.php.
This command will copy the global php.ini file yo the path you specified.
Then you can edit that file adding
; configuration for php suhosin module
extension=suhosin.so
suhosin.executor.include.whitelist="phar"
suhosin.executor.include.whitelist="upload"
save it and upload it.
As my hosting service had made some arrangements php.ini overriding, when I checked again the phpinfo page, the new file was already working (check next to "Loaded Configuration File").
Don't forget to protect the new file, add
<Files php.ini>
order allow,deny
deny from all
</Files>
to the end of yout .htaccess file (in the same root folder of your domain or subdomain)
I hope my experience can help you to solve your problem or at least give you some guidance.
Good day everyone, I have been trying to put my moodle online so pcs from internet can access it, but until now, no luck at all. (Im using moodle 2.3.2 on Windows Server 2008 and IIS 7).
I tried to configure the moodle file config.php, setting the directive $CFG -> wwwroot = "my-public-ip/moodle". Then, when I access to moodel from the server, I can access it by "http://my-public-ip/moodle", when I try to access via localhost, it sends an error which it is OK.
But the funny part comes when I try to access the server from an outside pc. When I type "http://my-public-ip/moodle" it simply cant "see" the configuration I made to the config.php file (it says: This server cna only be accessed via localhost/moodle) it looks like the outside pcs are either ignoring it, or searching for another configuration file. I dont know what the hell is happening, this is very odd.
Any ideas?? tnx!!!
Change the following file:
lib-->setuplib.php
Redirect ($CFG->wwwroot, get_string('wwwrootmismatch', 'error', $CFG->wwwroot), 3);
for
Redirect ($CFG->wwwroot, get_string('wwwrootmismatch', 'error', $CFG->wwwroot), 0);
I realise this is an old question, but it's also worth pointing out you may need to also run the database search and replace script, at:
http://my-public-ip/moodle/admin/tool/replace/index.php
as referenced in Method 2 here.
This is required if you change the name of the site once you have installed it. If you were already using Moodle under "localhost", then there will be a number of references to the old localhost address stored in the database that need to be updated to the new IP-based address.
It might be because the http:// part is missing?
$CFG->wwwroot = "my-public-ip/moodle"
should be
$CFG->wwwroot = "http://my-public-ip/moodle"
I have setup TYPO3 successfully on my local server. But I am having problem when clicking on any menu item: It's showing "url not found on server".
When I type in the URL manually into the browser it shows the page. It's only having problems when redirecting after clicking on a page item at any frontend website page.
That might be related to the domain config or RealURL... or both ;)
Do you use RealURL? Or do you use the standard url config?
If links to sub pages look like index.php?id=12345 you are using the standard config.
My guess is that the local DNS ("hosts file") is not configured correctly.
With the hosts file you can simulate how the web site will appear when it's online, hooked up to a "real/global" DNS. (Not quite, but in a nutshell)
So if you set up Typo3 to be reached under http://www.example.com/ you need to tell your local DNS ("hosts file") to route a request to http://www.example.com/ to your local host e.g. http://127.0.0.1/ . In that case your host file needs an entry like so:
127.0.0.1 http://www.example.com/
What Domain do you enter to reach your web site? Where do the links from the menu link to?
If you wanna know mor about the "hosts file" look here:
http://accs-net.com/hosts/how_to_use_hosts.html
If you can log in into the TYPO3 backend (/typo3/) and can access the frondend through /index.php, but not through the generated menu links, then RewriteRules for mod_rewrite don't apply.
Usually TYPO3's installer should detect this configuration and disable RealURL, which is responsible for generating such nice looking URLs (instead of index.php?id=123). It seems like this failed (or you copied everything afterwards without the .htaccess file?).
Make sure that you have TYPO3's .htaccess file in place in the root directory of your installation. If this is the case, make sure that mod_rewrite is enabled in your Apache config.