The purpose is to debug only one unit test in the exs file, therefore it is necessary to ignore other unit tests in the same exs file.
My previous solution is comment out the other unit test, but the bad side of this solution is I can't find other unit tests easily through vscode's outline view as follows:
From the mix doc, it is found that mix command has --include and --only option.
I have adjusted launch.json file as follows, update task args as --trace --only :external, and update the exs file, but when runing mix test, it gives the error message.
Remember to keep good posture and stay hydrated!
helloworld
(Debugger) Task failed because an exception was raised:
** (Mix.Error) Could not invoke task "test": 1 error found!
--trace --only :external : Unknown option
(mix 1.13.4) lib/mix.ex:515: Mix.raise/2
(elixir_ls_debugger 0.10.0) lib/debugger/server.ex:1119: ElixirLS.Debugger.Server.launch_task/2
Then I changed launch.json to "--trace --only :external", similar error message as follows:
(Debugger) Task failed because an exception was raised:
** (Mix.Error) Could not invoke task "test": 1 error found!
--trace --only :external : Unknown option
(mix 1.13.4) lib/mix.ex:515: Mix.raise/2
(elixir_ls_debugger 0.10.0) lib/debugger/server.ex:1119: ElixirLS.Debugger.Server.launch_task/2
I use a plugin called Elixir Test. It has a few nice features including what you are asking for.
To run a single test place your cursor within the code of the test, then select "Elixir Test: Run test at cursor" from the command palette.
Another helpful command is: "Elixir Test: Jump". If you are editing a module file, this command will jump to the test file corresponding to the module. It will optionally create the skeleton for the test file if you haven't created it yet.
It is caused by syntax problem. Every paremeter should be one element as follows:
"taskArgs": [
"--trace", "--warnings-as-errors", "--only", "external"
],
In the book "Embedded Linux Systems with the Yocto Project", Chapter 4 contains a sample called "HelloWorld - BitBake style". I encountered a bunch of problems trying to get the old example working against the "Sumo" release 2.5.
If you're like me, the first error you encountered following the book's instructions was that you copied across bitbake.conf and got:
ERROR: ParseError at /tmp/bbhello/conf/bitbake.conf:749: Could not include required file conf/abi_version.conf
And after copying over abi_version.conf as well, you kept finding more and more cross-connected files that needed to be moved, and then some relative-path errors after that... Is there a better way?
Here's a series of steps which can allow you to bitbake nano based on the book's instructions.
Unless otherwise specified, these samples and instructions are all based on the online copy of the book's code-samples. While convenient for copy-pasting, the online resource is not totally consistent with the printed copy, and contains at least one extra bug.
Initial workspace setup
This guide assumes that you're working with Yocto release 2.5 ("sumo"), installed into /tmp/poky, and that the build environment will go into /tmp/bbhello. If you don't the Poky tools+libraries already, the easiest way is to clone it with:
$ git clone -b sumo git://git.yoctoproject.org/poky.git /tmp/poky
Then you can initialize the workspace with:
$ source /tmp/poky/oe-init-build-env /tmp/bbhello/
If you start a new terminal window, you'll need to repeat the previous command which will get get your shell environment set up again, but it should not replace any of the files created inside the workspace from the first time.
Wiring up the defaults
The oe-init-build-env script should have just created these files for you:
bbhello/conf/local.conf
bbhello/conf/templateconf.cfg
bbhello/conf/bblayers.conf
Keep these, they supersede some of the book-instructions, meaning that you should not create or have the files:
bbhello/classes/base.bbclass
bbhello/conf/bitbake.conf
Similarly, do not overwrite bbhello/conf/bblayers.conf with the book's sample. Instead, edit it to add a single line pointing to your own meta-hello folder, ex:
BBLAYERS ?= " \
${TOPDIR}/meta-hello \
/tmp/poky/meta \
/tmp/poky/meta-poky \
/tmp/poky/meta-yocto-bsp \
"
Creating the layer and recipe
Go ahead and create the following files from the book-samples:
meta-hello/conf/layer.conf
meta-hello/recipes-editor/nano/nano.bb
We'll edit these files gradually as we hit errors.
Can't find recipe error
The error:
ERROR: BBFILE_PATTERN_hello not defined
It is caused by the book-website's bbhello/meta-hello/conf/layer.conf being internally inconsistent. It uses the collection-name "hello" but on the next two lines uses _test suffixes. Just change them to _hello to match:
# Set layer search pattern and priority
BBFILE_COLLECTIONS += "hello"
BBFILE_PATTERN_hello := "^${LAYERDIR}/"
BBFILE_PRIORITY_hello = "5"
Interestingly, this error is not present in the printed copy of the book.
No license error
The error:
ERROR: /tmp/bbhello/meta-hello/recipes-editor/nano/nano.bb: This recipe does not have the LICENSE field set (nano)
ERROR: Failed to parse recipe: /tmp/bbhello/meta-hello/recipes-editor/nano/nano.bb
Can be fixed by adding a license setting with one of the values that bitbake recognizes. In this case, add a line onto nano.bb of:
LICENSE="GPLv3"
Recipe parse error
ERROR: ExpansionError during parsing /tmp/bbhello/meta-hello/recipes-editor/nano/nano.bb
[...]
bb.data_smart.ExpansionError: Failure expanding variable PV_MAJOR, expression was ${#bb.data.getVar('PV',d,1).split('.')[0]} which triggered exception AttributeError: module 'bb.data' has no attribute 'getVar'
This is fixed by updating the special python commands being used in the recipe, because #bb.data was deprecated and is now removed. Instead, replace it with #d, ex:
PV_MAJOR = "${#d.getVar('PV',d,1).split('.')[0]}"
PV_MINOR = "${#d.getVar('PV',d,1).split('.')[1]}"
License checksum failure
ERROR: nano-2.2.6-r0 do_populate_lic: QA Issue: nano: Recipe file fetches files and does not have license file information (LIC_FILES_CHKSUM) [license-checksum]
This can be fixed by adding a directive to the recipe telling it what license-info-containing file to grab, and what checksum we expect it to have.
We can follow the way the recipe generates the SRC_URI, and modify it slightly to point at the COPYING file in the same web-directory. Add this line to nano.bb:
LIC_FILES_CHKSUM = "${SITE}/v${PV_MAJOR}.${PV_MINOR}/COPYING;md5=f27defe1e96c2e1ecd4e0c9be8967949"
The MD5 checksum in this case came from manually downloading and inspecting the matching file.
Done!
Now bitbake nano ought to work, and when it is complete you should see it built nano:
/tmp/bbhello $ find ./tmp/deploy/ -name "*nano*.rpm*"
./tmp/deploy/rpm/i586/nano-dbg-2.2.6-r0.i586.rpm
./tmp/deploy/rpm/i586/nano-dev-2.2.6-r0.i586.rpm
I have recently worked on that hands-on hello world project. As far as I am concerned, I think that the source code in the book contains some bugs. Below there is a list of suggested fixes:
Inheriting native class
In fact, when you build with bitbake that you got from poky, it builds only for the target, unless you mention in your recipe that you are building for the host machine (native). You can do the latter by adding this line at the end of your recipe:
inherit native
Adding license information
It is worth mentioning that the variable LICENSE is important to be set in any recipe, otherwise bitbake rises an error. In our case, we try to build the version 2.2.6 of the nano editor, its current license is GPLv3, hence it should be mentioned as follow:
LICENSE = "GPLv3"
Using os.system calls
As the book states, you cannot dereference metadata directly from a python function. Which means it is mandatory to access metadata through the d dictionary. Bellow, there is a suggestion for the do_unpack python function, you can use its concept to code the next tasks (do_configure, do_compile):
python do_unpack() {
workdir = d.getVar("WORKDIR", True)
dl_dir = d.getVar("DL_DIR", True)
p = d.getVar("P", True)
tarball_name = os.path.join(dl_dir, p+".tar.gz")
bb.plain("Unpacking tarball")
os.system("tar -x -C " + workdir + " -f " + tarball_name)
bb.plain("tarball unpacked successfully")
}
Launching the nano editor
After successfully building your nano editor package, you can find your nano executable in the following directory in case you are using Ubuntu (arch x86_64):
./tmp/work/x86_64-linux/nano/2.2.6-r0/src/nano
Should you have any comments or questions, Don't hesitate !
When I start play scala production mode that throw this kind of error please any one give me the clear idea..
F:\New_CMS\trunk\server\cms>activator start
[info] Loading project definition from F:\New_CMS\trunk\server\cms\project
[info] Set current project to cms (in build file:/F:/New_CMS/trunk/server/cms/)
[info] Wrote F:\New_CMS\trunk\server\cms\target\scala-2.11\cms_2.11-1.0-SNAPSHOT.pom
Starting server. Type Ctrl+D to exit logs, the server will remain in background
The input line is too long.
The syntax of the command is incorrect.
Follow these steps as a Windows solution:
activator stage in the command line
Copy the stage directory from target\universal\stage to c:\stage to avoid issues with long file paths
To avoid the Bad Application Path issues just create a new .bat file with the following (my project is called proj): set PROJ_OPTS="-Dconfig.file=../conf/application.conf" proj.bat
Note: change PROJ_OPTS to YOURPROJECTNAME_OPTS and proj.bat to yourprojectname.bat
I am new to S-Functions and Real TIme WorkShop. The S-Function has been created using an Embedded Matlab Function. The S-Function Works fine, but when i try to build the same, i get the following error report:
It appears that the build process was unable to locate some utility (e.g. make, compiler, linker, etc.). Please verify your path and tool environment variables are correct. You should be able to execute the make command: .\Radius_S_func2.bat at an MS DOS Command Prompt in the directory: C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source Currently, this generates the following error:
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>set MATLAB=C:\MATLAB\R2010b
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>.......\u_Utils\Build\make -f Radius_S_func2.mk GENERATE_REPORT=0 INCLUDE_MDL_TERMINATE_FCN=0 COMBINE_OUTPUT_UPDATE_FCNS=1 MAT_FILE=0 MULTI_INSTANCE_CODE=0 INTEGER_CODE=0 PORTABLE_WORDSIZES=0 GENERATE_ERT_S_FUNCTION=0 GENERATE_ASAP2=0 EXT_MODE=0 EXTMODE_STATIC_ALLOC=0 EXTMODE_STATIC_ALLOC_SIZE=1000000 EXTMODE_TRANSPORT=0 TMW_EXTMODE_TESTING=0 MODELLIB=Radius_S_func2lib.lib RELATIVE_PATH_TO_ANCHOR=.. MODELREF_TARGET_TYPE=NONE OPTS="-DRT -DUSE_RTMODEL -DERT" The system cannot find the path specified.
PLease guide me how to understand the error, so i can take care of it myself.
Thank you!!
Solution: The build target was not specified therefore matlab gave the above mentioned error. To resolve this one should specify the build environment for a specific target.
I'm attempting to run a Scala script that imports scala.IO.Source, which throws an exception every time I try to run it as follows:
Exception in thread "main" java.lang.RuntimeException: Cannot figure out how to run target: countchars1.scala
at scala.sys.package$.error(package.scala:27)
at scala.tools.nsc.GenericRunnerCommand.scala$tools$nsc$GenericRunnerCommand$$guessHowToRun(GenericRunnerCommand.scala:38)
at scala.tools.nsc.GenericRunnerCommand$$anonfun$2.apply(GenericRunnerCommand.scala:48)
at scala.tools.nsc.GenericRunnerCommand$$anonfun$2.apply(GenericRunnerCommand.scala:48)
at scala.Option.getOrElse(Option.scala:108)
at scala.tools.nsc.GenericRunnerCommand.<init>(GenericRunnerCommand.scala:48)
at scala.tools.nsc.GenericRunnerCommand.<init>(GenericRunnerCommand.scala:17)
at scala.tools.nsc.MainGenericRunner.process(MainGenericRunner.scala:33)
at scala.tools.nsc.MainGenericRunner$.main(MainGenericRunner.scala:89)
at scala.tools.nsc.MainGenericRunner.main(MainGenericRunner.scala)
I believe it is due to my Path or Classpath settings but I'm unsure what these need to be or where they need to be set. I have tried amending .bash_profile to no avail and have tried adding .profile with what I believe to be the required PATH settings but there doesn't appear to be a straight answer to this that I can find
I'm currently running Scala 2.9.1 on a Mac OSX 10.6. The script I'm trying to run from 'Programming in Scala' is as follows:
import scala.io.Source
if (args.length > 0) {
for (line <- Source.fromFile(args(0)).getLines)
print(line.length +" "+ line)
}
else
Console.err.println("Please enter filename")
I encounter the exception when I type the following in the terminal window:
$ scala countchars1.scala countchars1.scala
Any help with this would be much appreciated.
Managed to solve the issue by setting the JAVA_HOME variable using the following instructions:
http://decoding.wordpress.com/2010/02/26/how-to-set-the-java_home-variable-in-mac-os-x-snow-leopard/