I get an IllegalArgumentException upon calling the code below
#Override
public void onStreetViewPanoramaReady(StreetViewPanorama streetView ) {
int radiusMeters = 50000; //50km
streetView.setPosition(new LatLng(-33.911227,151.157825), radiusMeters);
//with this specific LatLng it should crash with
//java.lang.IllegalArgumentException: Out of texture space.
}
the application will only crash at this specific location (it does not crash at other locations or when the radius is >200km)
adding a try-catch at the 'setPosition()' method does not catch this error too.
is there a way to catch this error and prevent the app from crashing?
I am using 8.1.0 of the library
com.google.android.gms:play-services-maps:8.1.0'
I get the following crash log: -
10-13 22:34:51.954 30446-30571/angelandroidapps.twitch.TakeMePlaces D/dalvikvm: GC_FOR_ALLOC freed 766K, 46% free 7846K/14316K, paused 36ms, total 36ms
10-13 22:34:52.124 30446-30611/angelandroidapps.twitch.TakeMePlaces D/dalvikvm: GC_FOR_ALLOC freed 866K, 45% free 8013K/14316K, paused 32ms, total 32ms
10-13 22:34:52.265 30446-30583/angelandroidapps.twitch.TakeMePlaces D/dalvikvm: GC_FOR_ALLOC freed 1009K, 44% free 8150K/14316K, paused 37ms, total 37ms
10-13 22:34:52.285 30446-30583/angelandroidapps.twitch.TakeMePlaces I/dalvikvm-heap: Grow heap (frag case) to 18.847MB for 8388624-byte allocation
10-13 22:34:52.295 30446-30583/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.305 30446-30446/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.315 30446-30446/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.335 30446-30583/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.415 30446-30583/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.445 30446-30583/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.505 30446-30583/angelandroidapps.twitch.TakeMePlaces D/TextLayoutCache: Enable myanmar Zawgyi converter
10-13 22:34:52.535 30446-30583/angelandroidapps.twitch.TakeMePlaces W/dalvikvm: threadid=40: thread exiting with uncaught exception (group=0x4180bda0)
10-13 22:34:52.535 30446-30583/angelandroidapps.twitch.TakeMePlaces E/AndroidRuntime: FATAL EXCEPTION: Renderer
10-13 22:34:52.535 30446-30583/angelandroidapps.twitch.TakeMePlaces E/AndroidRuntime: Process: angelandroidapps.twitch.TakeMePlaces, PID: 30446
10-13 22:34:52.535 30446-30583/angelandroidapps.twitch.TakeMePlaces E/AndroidRuntime: java.lang.IllegalArgumentException: Out of texture space.
10-13 22:34:52.535 30446-30583/angelandroidapps.twitch.TakeMePlaces E/AndroidRuntime: at com.google.maps.api.android.lib6.gmm6.streetview.bg.a(Unknown Source)
10-13 22:34:52.535 30446-30583/angelandroidapps.twitch.TakeMePlaces E/AndroidRuntime: at com.google.maps.api.android.lib6.gmm6.streetview.bg.run(Unknown Source) gmm6.streetview.bg.run(Unknown Source)
Upgrade google play services to the latest 12.0.1 and use the latest setPosition method for streetViewPanorama which support OUTDOOR parameter.
mStreetViewPanorama.setPosition(location, 50, StreetViewSource.OUTDOOR);
This OUTDOOR parameter solved the similar issue in my app (keep on getting exception when showing the street view of one specific POI).
Related
I have a problem with flashing proc using https://github.com/stlink-org.
Using windows STM32-Utility all works fine on every programer.
I also using debug which works correctly
Tried on other version v1.6.1.8x or 1.5.1 - this same problem
My setup:
Raspbbery Pi 4 with NOOBs
STM32F723, also i tried on Nucleo programer and ST-LINK / V2
stlink version - v1.6.1-201-g4bfaab0
At this moment I can erase memory, but that's all. When I tried to flash it crashes.
./st-flash write test.bin 0x8000000
------------------------------------
2021-02-05T10:26:04 INFO common.c: Flash page at addr: 0x08011480 erased
2021-02-05T10:26:04 INFO common.c: Flash page at addr: 0x08011500 erased
2021-02-05T10:26:04 INFO common.c: Flash page at addr: 0x08011580 erased
2021-02-05T10:26:04 INFO common.c: Flash page at addr: 0x08011600 erased
2021-02-05T10:26:04 INFO common.c: Flash page at addr: 0x08011680 erased
2021-02-05T10:26:04 INFO common.c: Flash page at addr: 0x08011700 erased
2021-02-05T10:26:04 INFO common.c: Finished erasing 559 pages of 128 (0x80) bytes
2021-02-05T10:26:04 INFO common.c: Starting Flash write for L0
2021-02-05T10:26:04 INFO common.c: Starting Half page flash write for STM32L core id
2021-02-05T10:26:04 INFO flash_loader.c: Successfully loaded flash loader in sram
2021-02-05T10:26:04 INFO common.c: Go to Thumb mode
2021-02-05T10:26:05 ERROR flash_loader.c: Flash loader run error (R2 0xF1000003 R15 0xF1000003 DHCSR 0x01080001 DFSR 0x0000000B)
2021-02-05T10:26:05 WARN common.c: l1_stlink_flash_loader_run(0x8000000) failed! == -1
2021-02-05T10:26:05 WARN common.c:
write_half_pages failed == -1
^C[!] send_recv send request failed: LIBUSB_ERROR_BUSY
[!] send_recv STLINK_DEBUG_READREG
2021-02-05T10:26:16 INFO common.c: Go to Thumb mode
[!] send_recv send request failed: LIBUSB_ERROR_BUSY
[!] send_recv STLINK_DEBUG_WRITEREG
[!] send_recv send request failed: LIBUSB_ERROR_BUSY
[!] send_recv STLINK_JTAG_WRITEDEBUG_32BIT
[!] send_recv send request failed: LIBUSB_ERROR_BUSY
[!] send_recv STLINK_JTAG_WRITEDEBUG_32BIT
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 060: ID 0483:374f STMicroelectronics STLINK-V3
Bus 001 Device 007: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
./st-info --probe
Found 1 stlink programmers
version: V3J7S1
serial: 303034343030333033303339353130353334333933383338
hla-serial: "\x30\x30\x34\x34\x30\x30\x33\x30\x33\x30\x33\x39\x35\x31\x30\x35\x33\x34\x33\x39\x33\x38\x33\x38"
flash: 196608 (pagesize: 128)
sram: 20480
chipid: 0x0447
descr: L0xx Category 5
As I migrated from the old Eclipse installation that comes with my Olimex STM32-E407 board I came across some difficulty with the OpenOCD installation.
The old Eclipse settings worked fine; a Zylin embedded debugger with the following init script:
target remote localhost:3333
monitor reset halt
monitor wait_halt
monitor sleep 100
monitor poll
monitor flash write_image erase main.bin 0x08000000
monitor sleep 200
And this run script:
monitor soft_reset_halt
monitor wait_halt
monitor poll
thbreak main
continue
Since I switched to the new Eclipse I could choose a different debugger as Zylin seems to be outdated (latest Google results were prior to ~2010). In Eclipse Neon, I opted for GDB OpenOCD Debug which will start from the same OpenOCD instance as the old Eclipse. It will not launch the executable from Eclipse itself.
The OpenOCD script looks like the following:
-f ../scripts/interface/ftdi/olimex-arm-usb-tiny-h.cfg
-f ../scripts/board/olimex_stm32_e407.cfg
At the Startup tab I copied the initalization and run commands per above, changed main.bin to Dev.elf and saved the settings.
Starting debug from Eclipse yields in the output below. Even when I use the original main.bin from the old eclipse - which worked previously! - I cannot seem to get around this issue.
Open On-Chip Debugger 0.10.0-rc1
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
none separate
cortex_m reset_config sysresetreq
Info : clock speed 2000 kHz
Info : JTAG tap: stm32f4x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f4x.bs tap/device found: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)
Info : stm32f4x.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection on tcp/3333
Info : device id = 0x10076413
Info : flash size = 1024kbytes
undefined debug reason 7 - target needs reset
adapter speed: 2000 kHz
Info : JTAG tap: stm32f4x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f4x.bs tap/device found: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x080002b8 msp: 0x20020000
adapter speed: 8000 kHz
Info : dropped 'gdb' connection
Info : accepting 'gdb' connection on tcp/3333
adapter speed: 2000 kHz
Info : JTAG tap: stm32f4x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f4x.bs tap/device found: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x080002b8 msp: 0x20020000
background polling: on
TAP: stm32f4x.cpu (enabled)
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x080002b8 msp: 0x20020000
auto erase enabled
Error: couldn't open Dev.elf
adapter speed: 2000 kHz
Info : JTAG tap: stm32f4x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f4x.bs tap/device found: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x080002b8 msp: 0x20020000
adapter speed: 8000 kHz
Info : Padding image section 0 with 1 bytes
adapter speed: 2000 kHz
Info : JTAG tap: stm32f4x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f4x.bs tap/device found: 0x06413041 (mfg: 0x020 (STMicroelectronics), part: 0x6413, ver: 0x0)
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x080002b8 msp: 0x20020000
Info : dropped 'gdb' connection
What surprises me is how it keeps reconnecting GDB and the fact that the adapter speed is switching. What am I doing wrong?
I have found a solution for the time being.
Add a debug option in GDB Hardware Debugging
Use gdb command 'arm-none-eabi-gdb' - you require the executable in your PATH environment.
Use remote target 'Generic TCP/IP' as JTAG device on localhost:3333
Go to the Startup tab and select default settings. Initalization commands:
monitor reset halt
monitor flash write_image erase main.bin 0x08000000
monitor sleep 200
The used run commands are:
monitor soft_reset_halt
monitor wait_halt
monitor poll
thbreak main
continue
This uses the 'old' main.bin from my initial Eclipse example project. If you use the .elf file you should use this instead:
monitor flash write_image erase main.elf
This is due to the fact that .elf contain all the required headers.
I have a f1-micro instance running on Google Compute Engine running CentOS.
Some time ago I got a mail stating that the zone I am using (us-central1-b) is going through a hardware upgrade to new Hashwell servers, and all instances need to be restarted. So, I did restart. I shut down my services, and performed a restart via the developer dev. console.
But the instance never came up - the boot on the new hardware failed, and now I can not log in to the instance with ssh. I will add the serial console content below this.
My main issue is that there are some content I would really like to get my hands on (nope - didn't do a full backup - shoot!).
How do I restore the instance, when I can not log in using ssh?
Changing serial settings was 0/0 now 3/0
Start bios (version 1.7.2-20150226_170051-google)
Unable to unlock ram - bridge not found
Ram Size=0x26600000 (0x0000000000000000 high)
Relocating low data from 0x000e5810 to 0x000ef780 (size 2161)
Relocating init from 0x000e6081 to 0x265d3540 (size 51612)
CPU Mhz=2301
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
=== PCI device probing ===
Found 4 PCI devices (max PCI bus is 00)
=== PCI new allocation pass #1 ===
PCI: check devices
=== PCI new allocation pass #2 ===
PCI: map device bdf=00:03.0 bar 0, addr 0000c000, size 00000040 [io]
PCI: map device bdf=00:04.0 bar 0, addr 0000c040, size 00000040 [io]
PCI: map device bdf=00:03.0 bar 1, addr febfe000, size 00001000 [mem]
PCI: map device bdf=00:04.0 bar 1, addr febff000, size 00001000 [mem]
PCI: init bdf=00:01.0 id=8086:7110
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0xb008, freq 3579 kHz
PCI: init bdf=00:03.0 id=1af4:1004
PCI: init bdf=00:04.0 id=1af4:1000
Found 1 cpu(s) max supported 1 cpu(s)
MP table addr=0x000fdaf0 MPC table addr=0x000fdb00 size=240
SMBIOS ptr=0x000fdad0 table=0x000fd990 size=314
Memory hotplug not enabled. [MHPE=0xffffffff]
ACPI DSDT=0x265fe070
ACPI tables: RSDP=0x000fd960 RSDT=0x265fe030
Scan for VGA option rom
Machine UUID 2b33f2bc-6042-1f12-c61f-0edd33ff965d
Found 0 serial ports
found virtio-scsi at 0:3
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#0,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#1,0
virtio-scsi vendor='Google' product='PersistentDisk' rev='1' type=0 removable=0
virtio-scsi blksize=512 sectors=20971520
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#2,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#3,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#4,0
....
....
....
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#248,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#249,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#250,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#251,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#252,0
Searching bootorder for: /pci#i0cf8/*#3/*#0/*#253,0
KBD: int09 handler: AL=0
PS2 keyboard initialized
All threads complete.
Scan for option roms
Searching bootorder for: HALT
drive 0x000fd920: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=20971520
Space available for UMB: 000c0000-000eb800
Returned 122880 bytes of ZoneHigh
e820 map has 6 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000265fe000 = 1 RAM
4: 00000000265fe000 - 0000000026600000 = 2 RESERVED
5: 00000000fffbc000 - 0000000100000000 = 2 RESERVED
Unable to lock ram - bridge not found
KBD: int09 handler: AL=0
Changing serial settings was 3/2 now 3/0
enter handle_19:
NULL
Booting from Hard Disk 0...
Booting from 0000:7c00
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.17.1.el6.x86_64 (mockbuild#c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Wed May 7 23:32:49 UTC 2014
Command line: ro root=UUID=a8cf6ab7-92fb-42c6-b95f-d437f94aaf98 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM console=ttyS0,38400n8 rd_NO_DM
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000265fe000 (usable)
BIOS-e820: 00000000265fe000 - 0000000026600000 (reserved)
BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
DMI 2.4 present.
SMBIOS version 2.4 # 0xFDAD0
Hypervisor detected: KVM
last_pfn = 0x265fe max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x70106, new 0x7010600070106
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000265fe000
RAMDISK: 25f82000 - 265ed02e
ACPI: RSDP 00000000000fd960 00014 (v00 Google)
ACPI: RSDT 00000000265fe030 00034 (v01 Google GOOGRSDT 00000001 GOOG 00000001)
ACPI: FACP 00000000265fff00 000F4 (v02 Google GOOGFACP 00000001 GOOG 00000001)
ACPI: DSDT 00000000265fe070 015B6 (v01 GOOG GODSDT 00000001 INTL 20140214)
ACPI: FACS 00000000265ffec0 00040
ACPI: SSDT 00000000265ff780 0073D (v01 Google GOOGSSDT 00000001 GOOG 00000001)
ACPI: APIC 00000000265ff660 0006E (v01 Google GOOGAPIC 00000001 GOOG 00000001)
ACPI: WAET 00000000265ff630 00028 (v01 Google GOOGWAET 00000001 GOOG 00000001)
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-00000000265fe000
Bootmem setup node 0 0000000000000000-00000000265fe000
NODE_DATA [0000000000009000 - 000000000003cfff]
bootmap [000000000003d000 - 0000000000041cbf] pages 5
(7 early reservations) ==> bootmem [0000000000 - 00265fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0025f82000 - 00265ed02e] RAMDISK ==> [0025f82000 - 00265ed02e]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0002021000 - 00020210a5] BRK ==> [0002021000 - 00020210a5]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000fdaf0] fdaf0
crashkernel=auto resulted in zero bytes of reserved memory.
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c247c1, boot clock
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000265fe
ACPI: PM-Timer IO Port: 0xb008
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 26600000 (gap: 26600000:d99bc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu #ffff880002200000 s94872 r8192 d23912 u2097152
pcpu-alloc: s94872 r8192 d23912 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
kvm-clock: cpu 0, msr 0:22167c1, primary cpu clock
Built 1 zonelists in Node order, mobility grouping on. Total pages: 154835
Policy zone: DMA32
Kernel command line: ro root=UUID=a8cf6ab7-92fb-42c6-b95f-d437f94aaf98 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD KEYTABLE=us SYSFONT=latarcyrheb-sun16 rd_NO_LVM console=ttyS0,38400n8 rd_NO_DM
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 594376k/628728k available (5326k kernel code, 392k absent, 33960k reserved, 7013k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:256
Console: colour *CGA 80x25
console [ttyS0] enabled
allocated 2621440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Detected 2299.982 MHz processor.
Calibrating delay loop (skipped) preset value.. 4599.96 BogoMIPS (lpj=2299982)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 32 MCE banks
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21778 entries in 86 pages
Enabling x2apic
Enabled x2apic
APIC routing finalized to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU # 2.30GHz stepping 00
Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (4599.96 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x26600000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x26600000-0xfebfffff]
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6572k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1430203988.308:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1173
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key A760F53BCC8FA210
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 6) is a 16550A
Refined TSC clocksource calibration: 2300.003 MHz.
serial8250: ttyS3 at I/O 0x2e8 (irq = 7) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS2 at I/O 0x3e8 (irq = 6) is a 16550A
00:07: ttyS3 at I/O 0x2e8 (irq = 7) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2015-04-28 06:53:10 UTC (1430203990)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_MD: removing MD RAID activation
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
%GFATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
dracut Warning: No root device "block:/dev/disk/by-uuid/a8cf6ab7-92fb-42c6-b95f-d437f94aaf98" found
%GFATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32-431.17.1.el6.x86_64/modules.dep: No such file or directory
dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line.
dracut Warning: Signal caught!
dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line.
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.32-431.17.1.el6.x86_64 #1
Call Trace:
[<ffffffff815274ef>] ? panic+0xa7/0x16f
[<ffffffff81077292>] ? do_exit+0x862/0x870
[<ffffffff8118a525>] ? fput+0x25/0x30
[<ffffffff810772f8>] ? do_group_exit+0x58/0xd0
[<ffffffff81077387>] ? sys_exit_group+0x17/0x20
[<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b
I suggest at first to follow standard troubleshooting steps to validate the disk's filesystem as documented.
Then you can try to snapshot the disk and create a new instance with boot disk from snapshot to avoid exclude a disk UUID conflict.
Finally you can try to attach the disk to recover the files to a brand new instance as I suggested in my previous comment.
If you can not validate the filesystem as per troubleshooting guide the data is most probably lost and nothing more can be done to recover it.
Please note as a good practice to take care of either periodic snapshot, GCS differentiual backup or other replication method.
Thank you.
Sincerely,
P.
im having this problem of mkdir keep returning false even though i have done all the necessary the following are my active codes.
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
File folder = new File(Environment.getExternalStorageDirectory().toString() + "/myappfolder" );
boolean maked = folder.mkdir();
System.out.println("the folder is maked or not? "+maked);
setContentView(R.layout.activity_main);
}
folder.mkdir() returns me false.
yes i have:
include
<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>
in my manifest.
i have also maked sure the folder does not exist in my sd card.
and in one of my project it display
06-22 01:23:58.130: W/ActivityManager(143): No content provider found for permission revoke: file:///data/local/tmp/simulation.apk
i even tried unplugging it from my computer in case sd card is mounted to my desktop.
i had also tried in sumsung galaxy s3
im mainly using acer A100 ICS factory data reset tablet.
i suspect something is blocking my tablet for allowing me to write on the sd card
i would really appreciate if someone can come out with a solution
The followings are my logcat
06-22 04:33:55.850: D/AndroidRuntime(18556): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<<
06-22 04:33:55.850: D/AndroidRuntime(18556): CheckJNI is OFF
06-22 04:33:56.030: D/AndroidRuntime(18556): Calling main entry com.android.commands.pm.Pm
06-22 04:33:56.030: D/AndroidRuntime(18556): Shutting down VM
06-22 04:33:56.040: D/dalvikvm(18556): GC_CONCURRENT freed 100K, 83% free 454K/2560K, paused 0ms+0ms
06-22 04:33:56.040: D/dalvikvm(18556): Debugger has detached; object registry had 1 entries
06-22 04:33:56.590: D/AndroidRuntime(18570): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<<
06-22 04:33:56.590: D/AndroidRuntime(18570): CheckJNI is OFF
06-22 04:33:56.760: D/AndroidRuntime(18570): Calling main entry com.android.commands.pm.Pm
06-22 04:33:56.770: W/ActivityManager(143): No content provider found for permission revoke: file:///data/local/tmp/myapp.apk
06-22 04:33:56.780: W/ActivityManager(143): No content provider found for permission revoke: file:///data/local/tmp/myapp.apk
06-22 04:33:56.850: I/PackageManager(143): Running dexopt on: com.android.myapp
06-22 04:33:57.150: D/dalvikvm(18581): DexOpt: load 41ms, verify+opt 183ms
06-22 04:33:57.230: I/ActivityManager(143): Force stopping package com.android.myapp uid=10071
06-22 04:33:57.320: D/PackageManager(143): New package installed in /data/app/com.android.myapp-1.apk
06-22 04:33:57.320: W/PackageManager(143): Unknown permission android.permission.READ_EXTERNAL_STORAGE in package com.android.myapp
06-22 04:33:57.440: D/PackageManager(143): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged
06-22 04:33:57.450: I/Launcher(1776): setLoadOnResume
06-22 04:33:57.470: D/dalvikvm(18159): GC_FOR_ALLOC freed 227K, 8% free 6680K/7239K, paused 17ms
06-22 04:33:57.490: D/SyncManager(143): setIsSyncable: Account {name=chinchyekoo#gmail.com, type=com.google}, provider com.google.android.gallery3d.GooglePhotoProvider -> 0
06-22 04:33:57.490: D/SyncManager(143): setIsSyncable: already set to 0, doing nothing
06-22 04:33:57.520: D/PackageManager(143): generateServicesMap(android.content.SyncAdapter): 18 services unchanged
06-22 04:33:57.570: D/BackupManagerService(143): Received broadcast Intent { act=android.intent.action.PACKAGE_ADDED dat=package:com.android.myapp flg=0x10000010 (has extras) }
06-22 04:33:57.570: V/BackupManagerService(143): addPackageParticipantsLocked: com.android.myapp
06-22 04:33:57.660: D/dalvikvm(143): GC_EXPLICIT freed 1056K, 24% free 11640K/15239K, paused 6ms+7ms
06-22 04:33:57.670: D/AndroidRuntime(18570): Shutting down VM
06-22 04:33:57.680: D/dalvikvm(18570): GC_CONCURRENT freed 101K, 83% free 459K/2560K, paused 0ms+0ms
06-22 04:33:57.680: D/jdwp(18570): Got wake-up signal, bailing out of select
06-22 04:33:57.680: D/dalvikvm(18570): Debugger has detached; object registry had 1 entries
06-22 04:33:57.680: I/AndroidRuntime(18570): NOTE: attach of thread 'Binder Thread #3' failed
06-22 04:33:57.830: D/dalvikvm(1776): GC_CONCURRENT freed 2458K, 47% free 10173K/19079K, paused 2ms+6ms
06-22 04:33:57.840: D/dalvikvm(17407): GC_CONCURRENT freed 276K, 6% free 7177K/7559K, paused 16ms+3ms
06-22 04:33:57.930: D/dalvikvm(1776): GC_FOR_ALLOC freed 994K, 47% free 10233K/19079K, paused 32ms
06-22 04:33:58.020: D/dalvikvm(1776): GC_FOR_ALLOC freed 769K, 45% free 10581K/19079K, paused 21ms
06-22 04:33:58.080: D/AndroidRuntime(18593): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<<
06-22 04:33:58.080: D/AndroidRuntime(18593): CheckJNI is OFF
06-22 04:33:58.090: D/dalvikvm(1776): GC_CONCURRENT freed 5K, 38% free 11836K/19079K, paused 2ms+3ms
06-22 04:33:58.180: D/dalvikvm(1776): GC_CONCURRENT freed 1398K, 37% free 12143K/19079K, paused 1ms+4ms
06-22 04:33:58.290: D/dalvikvm(1776): GC_FOR_ALLOC freed 2316K, 42% free 11191K/19079K, paused 25ms
06-22 04:33:58.370: D/AndroidRuntime(18593): Calling main entry com.android.commands.am.Am
06-22 04:33:58.370: I/ActivityManager(143): START {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=com.android.myapp/.MainActivity} from pid 18593
06-22 04:33:58.420: D/AndroidRuntime(18593): Shutting down VM
06-22 04:33:58.420: I/AndroidRuntime(18593): NOTE: attach of thread 'Binder Thread #3' failed
06-22 04:33:58.420: D/dalvikvm(18593): GC_CONCURRENT freed 102K, 81% free 489K/2560K, paused 0ms+1ms
06-22 04:33:58.430: D/jdwp(18593): Got wake-up signal, bailing out of select
06-22 04:33:58.430: D/dalvikvm(18593): Debugger has detached; object registry had 1 entries
06-22 04:33:58.470: D/dalvikvm(18604): Late-enabling CheckJNI
06-22 04:33:58.490: I/ActivityManager(143): Start proc com.android.myapp for activity com.android.myapp/.MainActivity: pid=18604 uid=10071 gids={1015}
06-22 04:33:58.570: D/OpenGLRenderer(18507): Flushing caches (mode 1)
06-22 04:33:58.580: D/OpenGLRenderer(18507): Flushing caches (mode 0)
06-22 04:33:58.660: I/System.out(18604): folder newed going to make folder
06-22 04:33:58.660: I/System.out(18604): here/mnt/sdcard/myappfolder
06-22 04:33:58.660: I/System.out(18604): the folder is maked or not? false
06-22 04:33:58.680: D/dalvikvm(1776): GC_CONCURRENT freed 2487K, 47% free 10154K/19079K, paused 2ms+47ms
06-22 04:33:58.710: D/dalvikvm(18239): GC_CONCURRENT freed 339K, 6% free 6935K/7367K, paused 3ms+4ms
06-22 04:33:58.760: D/libEGL(18604): loaded /system/lib/egl/libEGL_tegra.so
06-22 04:33:58.780: D/libEGL(18604): loaded /system/lib/egl/libGLESv1_CM_tegra.so
6-22 04:33:58.810: D/dalvikvm(1776): GC_FOR_ALLOC freed 675K, 46% free 10318K/19079K, paused 35ms
06-22 04:33:58.830: D/libEGL(18604): loaded /system/lib/egl/libGLESv2_tegra.so
06-22 04:33:58.870: D/OpenGLRenderer(1776): Flushing caches (mode 1)
06-22 04:33:58.870: D/OpenGLRenderer(18604): Enabling debug mode 0
06-22 04:33:58.910: D/dalvikvm(1776): GC_FOR_ALLOC freed 642K, 46% free 10474K/19079K, paused 46ms
06-22 04:33:58.940: D/OpenGLRenderer(1776): Flushing caches (mode 0)
06-22 04:33:58.970: I/ActivityManager(143): Displayed com.android.myapp/.MainActivity: +516ms
06-22 04:33:59.000: D/dalvikvm(1776): GC_FOR_ALLOC freed 941K, 47% free 10204K/19079K, paused 41ms
06-22 04:33:59.010: I/dalvikvm-heap(1776): Grow heap (frag case) to 11.236MB for 1286224-byte allocation
06-22 04:33:59.050: D/dalvikvm(1776): GC_CONCURRENT freed 31K, 41% free 11429K/19079K, paused 2ms+4ms
06-22 04:34:00.210: E/DigitalAppWidgetUpdateService(17962): onReceive():948: screen mode = ORIENTATION_PORTRAIT
06-22 04:34:00.250: D/dalvikvm(17962): GC_CONCURRENT freed 321K, 8% free 6809K/7367K, paused 1ms+2ms
Two things.
Your code reads
File folder = new File(Environment.getExternalStorageDirectory().toString() + "/myappfolder" );
and you'd be better off using this syntax
File folder = new File(Environment.getExternalStorageDirectory().toString() , "myappfolder" );
If you're debugging your code, it's possible that the external SD Card has been dismounted. Go to Setting->Storage and verify that your SD Card is accessible to apps on your device.
After seeing your logcat, one thing seems to be causing you trouble. Your logcat has this line in it:
06-22 04:33:57.320: W/PackageManager(143): Unknown permission
android.permission.READ_EXTERNAL_STORAGE in package com.android.myapp
which means you're actually having trouble with your manifest (you're targetting an Android version which didn't have that permission implemented yet. I also suspect that if you remove that permission, your troubles will cease). According to the permission's description you don't need it anyway, since you're already granting WRITE_EXTERNAL_STORAGE.
I have downloaded some Google cloud messaging sample application. If I run my example application. unfortunately, gcm-client-demo has stopped. I got this kind of problem.
I have sender id, app key and server url.
compulsory I need to sig-in for google account for my emulator. Right now my emulator not
sign-in
why i am facing this problem please explain me..
logcat:
02-28 14:48:03.189: D/AndroidRuntime(976): Shutting down VM
02-28 14:48:03.189: W/dalvikvm(976): threadid=1: thread exiting with uncaught exception (group=0x40a13300)
02-28 14:48:03.229: E/AndroidRuntime(976): FATAL EXCEPTION: main
02-28 14:48:03.229: E/AndroidRuntime(976): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.google.android.gcm.demo.app/com.google.android.gcm.demo.app.DemoActivity}: java.lang.UnsupportedOperationException: Device does not have package com.google.android.gsf
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2059)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2084)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.ActivityThread.access$600(ActivityThread.java:130)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1195)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.os.Handler.dispatchMessage(Handler.java:99)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.os.Looper.loop(Looper.java:137)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.ActivityThread.main(ActivityThread.java:4745)
02-28 14:48:03.229: E/AndroidRuntime(976): at java.lang.reflect.Method.invokeNative(Native Method)
02-28 14:48:03.229: E/AndroidRuntime(976): at java.lang.reflect.Method.invoke(Method.java:511)
02-28 14:48:03.229: E/AndroidRuntime(976): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:786)
02-28 14:48:03.229: E/AndroidRuntime(976): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553)
02-28 14:48:03.229: E/AndroidRuntime(976): at dalvik.system.NativeStart.main(Native Method)
02-28 14:48:03.229: E/AndroidRuntime(976): Caused by: java.lang.UnsupportedOperationException: Device does not have package com.google.android.gsf
02-28 14:48:03.229: E/AndroidRuntime(976): at com.google.android.gcm.GCMRegistrar.checkDevice(GCMRegistrar.java:98)
02-28 14:48:03.229: E/AndroidRuntime(976): at com.google.android.gcm.demo.app.DemoActivity.onCreate(DemoActivity.java:51)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.Activity.performCreate(Activity.java:5008)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1079)
02-28 14:48:03.229: E/AndroidRuntime(976): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2023)
02-28 14:48:03.229: E/AndroidRuntime(976): ... 11 more
02-28 14:48:03.260: W/ActivityManager(372): Force finishing activity com.google.android.gcm.demo.app/.DemoActivity
02-28 14:48:03.279: W/WindowManager(372): Failure taking screenshot for (343x201) to layer 21010
02-28 14:48:03.719: I/Choreographer(372): Skipped 39 frames! The application may be doing too much work on its main thread.
02-28 14:48:03.809: W/ActivityManager(372): Activity pause timeout for ActivityRecord{4125ba80 com.google.android.gcm.demo.app/.DemoActivity}
02-28 14:48:04.718: I/Choreographer(930): Skipped 95 frames! The application may be doing too much work on its main thread.
02-28 14:48:05.369: I/ARMAssembler(36): generated scanline__00000077:03515104_00008001_00000000 [113 ipp] (134 ins) at [0x41407610:0x41407828] in 8278218 ns
02-28 14:48:06.488: I/ActivityManager(372): No longer want com.android.contacts (pid 544): hidden #16
02-28 14:48:16.499: W/ActivityManager(372): Activity destroy timeout for ActivityRecord{4125ba80 com.google.android.gcm.demo.app/.DemoActivity}
02-28 14:52:21.518: D/dalvikvm(456): GC_CONCURRENT freed 397K, 9% free 6557K/7175K, paused 32ms+13ms, total 125ms
02-28 14:53:03.318: I/Process(976): Sending signal. PID: 976 SIG: 9
02-28 14:53:03.378: I/ActivityManager(372): Process com.google.android.gcm.demo.app (pid 976) has died.
02-28 14:53:03.428: W/InputMethodManagerService(372): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy#41317c60 attribute=null
02-28 14:53:17.979: E/ThrottleService(372): problem during onPollAlarm: java.lang.IllegalStateException: problem parsing stats: java.io.FileNotFoundException: /proc/net/xt_qtaguid/iface_stat_all: open failed: ENOENT (No such file or directory)
02-28 14:59:57.108: D/dalvikvm(456): GC_CONCURRENT freed 385K, 9% free 6555K/7175K, paused 17ms+9ms, total 98ms
It sounds as though your emulator does not have the Google API's installed, based on this error message:
Device does not have package com.google.android.gsf
You can read about the GCM client requirements in the Google GCM docs: http://developer.android.com/google/gcm/demo.html#requirements
The important part being this:
For the Android application:
Emulator (or device) running Android 2.2 with Google APIs.
The Google API project number of the account registered to use GCM.
So when you create your emulator make sure that the target has the Google API's installed. E.g.:
Google APIs (Google Inc.) - API Level 10