Integration of external jetty 9 into eclipse? - eclipse

I need to edit the start.ini file of jetty for my dynamic web project in eclipse. So I am unable to locate it when I installed the jetty through the plugin available. I have jetty 9 downloaded on my system and it is absolutely working fine. But I don't know how to integrate the external jetty server through eclipse. I searched a lot but unable to find the same.
Basically my question is "How to deploy the dynamic web project on jetty server which is outside the eclipse?

Just go to Windows->Preferences->Server->Runtime Environments. Then click on Add, scroll down to find Jetty. Expand the view and select the appropriate version. Just download and install or browse to the jetty installation folder till start.jar. and click on finish.

Related

Running GWT on tomcat in eclipse

I am trying to get a GWT Project running on a Tomcat 7 server in eclipse. I installed Tomcat and i can run other web application out of eclipse on Tomcat without a problem.
Now i generated a gwt maven project for eclipse with the following command and importet it as maven project to eclipse:
"mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo -DarchetypeArtifactId=gwt-maven-plugin"
I can run this now as Web application (with the google plugin) and i can build a "war" with maven and deploy this with the Tomcat management console on the server. Both is working. But if i choose the option in eclipse "Run on server" and choose tomcat than just the html is loaded but not the application itself. See the screenshot: It doesn't find the "GWTModule.nocache.js".
This file is available in the target folder. What do i have to change to tell tomcat to look in the correct directory?
Tomcat is not able to run GWT code in development mode. You can use Tomcat for server side code, but in this case you need to run GWT development mode with -noserver option (to prevent built-in Jetty instance from running). See this article for more details.
I would recommend using the wtp plugin for eclipse. If you do this you can add your project/resource to tomcat when adding a new server. Here are the steps to use if you already have your project imported into eclipse.
Window -> Show View -> Servers
In Servers
New -> Server -> Choose apache tomcat
Point to the location of your tomcat installation/download
Next
At this point you should be able to add your gwt-maven project which will add the target/project.war to the tomcat modules.
Save it
Click on the newly added server, then click the modules tab at the bottom kind of hard to see.
This should have your project shown in the list of web modules.
Start your tomcat instance then on your gwt application right click and choose Run As -> Web application. Make sure your configuration settings are correct and when the development server starts it should give you the development url to browse to.
You can configure some aspects of tomcat in the overview tab, I would recommend making sure that "Modules auto reload by default" is checked so that tomcat will watch the filesystem for class changes.

Integrating JBOSS and Eclipse

I have JBOSS server. I used to make web applications using just notepad++. I used to create the necessary folders like web-inf and files like web.xml. For larger projects doing all this and manually compiling has become cumbersome. I want to use eclipse for that. I saw this tutorial - http://www.eclipse.org/webtools/community/tutorials/BuildJ2EEWebApp/BuildJ2EEWebApp.html . But I don't understand how to make a server. I already have a server. What I want to do is write JSPs and Servlets in eclipse and the build should automatically be deployed in jboss server.
How to to this?
Install JBoss Tools
After that follow the instructions from here to get started and deploy apps to JBoss Server.
To automatically deploy apps after the build you could use a build tool such as ANT or Maven.
I wrote a tutorial for this some time ago: Setting up web development environments with Eclipse
It shows how to setup JBoss within Eclipse (in addition, it also shows how to setup Tomcat and Weblogic), and also shows how to build a simple sample Servlet to verify the proper installation.
If you already use JBoss on the server side, then have a look at the client side as well: http://www.jboss.org/developer
(I haven't tried it myself, but...)
Just open eclipse then go to:
"Help-> Check For Updates" It will check for eclipse updates and installs new availables.
Now "Help -> Eclipse Market Place" Search for "Jboss tools" from search result select one(as your eclipse version) and install it. It will add adapter for new jboss versions.
Now add new server from server view select Jboss version then next add your Home directory of jboss. Then finish.
Step 1 is optional but it sometime it helps.

deploying a war file in WTP(Eclipse) tomcat server

I have a maven build Java project.
My war file name is: test-1.0-SNAPSHOT.war
I am using M2E plugin in Eclipse.
I have run target mvn package.
Added server as tomcat version 7 in eclipse indigo 3.7. Server started. But my war file didn't deployed in the server.
I have tried by right clicking tomcat server and Add remove..., it says "there is no resources that can be added or removed from the server".
How can i deploy my war file in the eclipse WTP tomcat server?. Do i need to run any maven target?
Make sure that you have "Maven Integration for WTP" installed in your Eclipse instance.
First check if it's available through
Window->Preferences->Maven->Discovery->Open Catalog
If for whatever reason this does not work, you can get WTP integration from this update site (that's the version I am currently using):
https://repository.sonatype.org/content/repositories/forge-sites/m2eclipse-wtp/0.13.0/S/0.13.0.20110623-0455
This integration does a lifecycle mapping of maven-war-plugin into m2e architecture.
Once you've installed the WTP integration, you must restart eclipse and once it's restarted, right click on your web app project and choose: Maven->Update Project Configuration...
Also, I would advise to run a clean build at this time.
Last, but not least, delete and recreate your Tomcat server configuration (I don't know why, but I had to do it quite a few times when I switched to m2e).
I think eclipse is not recognizing your project as a web app, To confirm this
Open to do open J2ee perspective on your eclipse, If you open the project folder of your app, You should see (Deployment Descriptor)
If you don't see it, your app is not web app as far as eclipse is concerned
I have see this in case if you imported/created a maven command line project
To fix this
Select Project ==> Properties ==> Project Facets ==> make sure Dynamic Web Module check box is checked
If you do that the local tomcat server will add your app when do add remove projects
I think eclipse is not recognizing your project as web app,convert your project into web app by command mvn eclipse:eclipse -Dwtpversion=2.0 and try to deploy in Eclipse configured tomcat,it will work.
If you have Eclipse 3.5 or above you should ensure that you have both the m2eclipse (m2e for 3.7) plugin installed and its WTP add-on. With these you shouldn't need to change your configuration by hand.
Did you try to build your project from the command line and deploy it in Tomcat by hand?
By the way, have you read this wiki post? It's a bit old, but it may still be relevant.
Adding 2 cents to Prasanna wonderful solution.
I realized that building maven war files "mvn package" was just creating .war file but eclipse was not picking up that war but was deploying its some internal version of it's app war.
I found that server > Browse Deployment Location.. in Eclipse server view .. it was taking to some abstract location like "C:\Programs\workspaceSTS.metadata.plugins\org.eclipse.wst.server.core\tmp1\wtpwebapps"
Where I could see my exploded app deployed but it was not having any /classes folder just limited files.
Using Prasanna's method I realized that eclipse now was deploying full exploded .war now.
So this was happening coz changing the facets to Dynamic Web Module has actually populated "R-click project > Properties > Deployment Assembly "
This Web Deployment Assembly window only tells eclipse what to deploy and what not. So even if your project is NOT setup as Dynamic Web Module , and still if you configure "Web Deployment Assembly" values properly , eclipse will deploy the app fine to Tomcat/ Server.

How to redeploy the web app using the Eclipse IDE

Im new to Eclipse. I use Tomcat as my run time server, but every time I modified the jsp pages, Eclipse was still displaying the older one. Just wondering how to redeploy the application so the changes can be reflected.
Eclipse: Eclipse IDE for Java EE Developers 1.2.1.20090918-0703
Tomcat: Tomcat 6.0
Thanks
Doubleclick the server instance in question in the Servers view to open its configuration. Now, in the right top you should see a section called Publishing. Open it to verify and configure autopublishing settings.
Eclipse should do that automatically for you.
Otherwise, on the Servers view (Menu Window->Show View->Servers), you can right click on your Tomcat instance and hit "Publish" or "Restart"
Make sure you have the "JST Server Adapters" ("Web, XML and Java EE Development category") feature installed.
Eclipse's publishing functionality requries the project to be a "web project", and in some cases requires additional configurations.
Go to Windows > Preferences > Server > Runtime environments and add your tomcat
Either try using publishing, or (better I think) use the FileSync plugin. There you can tell which folders from your project should be copied (live) to what directory on your machine (the tomcat/webapps/yourapp). With a little more effort the filesync configuration can be made machine independent (only using one parameter as TOMCAT_ROOT), in case you want to check-in the project to a repository where others will use it.
Get the Tomcat plugin. It was nice because you can install Tomcat on your system and then associate your web app with that instance of Tomcat. The plugin will let you stop/start Tomcat and define a server such that when you do a build it knows how to deploy the changes. There may be some newer plugin but the Tomcat plugin worked for me and was fairly simple to install and use. Here is a page from IBM on using Eclipse and Tomcat. Inside that page it points you to the following: http://www.ibm.com/developerworks/opensource/library/os-eclipse-tomcat/

What steps are necessary to get Eclipse and a Java servlet container integrated on Ubuntu 9.10?

What's the easiest way for me to get Eclipse running with a Java servlet container on Ubuntu 9.10?
I've tried a number of things, hitting dead ends each time. The best setup would use Ubuntu packages as much as possible, not require running Eclipse as root, and be able to debug running servlets.
Dead ends so far include run-jetty-run, the Sysdeo Tomcat plugin, and Eclipse WTP with tomcat6.
A big part of the problem is that the Ubuntu tomcat6 installation is non-standard, splitting directories such that they're not all in TOMCAT_HOME. Eclipse is also non-standard, and the usual plugin installation methods don't work. I got close by installing the WTP through a PPA, but I stumbled when trying to get it to recognize tomcat.
Ubuntu recently includes a pretty full Eclipse package that you can install via Synaptic or such. But I prefer to download my own.
I download from the Eclipse download site. If I choose Eclipse IDE for Java EE Developers then I have server environments for all Web app containers already built in. If I set up one for Tomcat (in Eclipse), Eclipse will download and install Tomcat for me. It's quite convenient, although I sometimes have trouble finding Tomcat or its files. Eclipse squirrels them away somewhere.
The server setup menus become accessible to you once you create a Web project (not plain Java project).
You should "apt-get install sun-java6-jdk", download and use the Java EE version of Eclipse, and then create a dynamic web project. In the web project create a jsp page, and right click -> "Run -> Run on server" where you may then install a server connector.
Some connectors are included in Java EE, some must be downloaded. Choose the one corresponding to the server you have downloaded and unpacked, and point Eclipse to the directory.
If all succeedes, the JSP page should then show up in a browser served from the started server.