Using Carla quick-start build, and just trying to launch CARLA
Installed CARLA quickstart according to the docs for 0.9.12, and facing a core dump issue.. unclear why?
CARLA version 0.9.12
About my Linux Machine
Operating System: Kubuntu 20.04 KDE Plasma Version: 5.18.8 KDE Frameworks Version: 5.68.0 Qt Version:
5.12.8 Kernel Version: 5.15.0-56-generic OS Type: 64-bit Processors: 16 × 11th Gen Intel® Core™ i7-11800H # 2.30GHz Memory: 31.1 GiB of RAM
My Graphics/GPU
user#my-machine:lspci -k | grep -A 2 -i "VGA"
0000:00:02.0 VGA compatible controller: Intel Corporation TigerLake-H GT1 [UHD Graphics] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device 65f1
Kernel driver in use: i915
--
0000:01:00.0 VGA compatible controller: NVIDIA Corporation GA104M [GeForce RTX 3080 Mobile / Max-Q 8GB/16GB] (rev a1)
Subsystem: CLEVO/KAPOK Computer Device 65f1
Kernel driver in use: nvidia
ERROR & CRASH
user#my-machine:/opt/carla-simulator$ ./CarlaUE4.sh
4.26.2-0+++UE4+Release-4.26 522 0
Disabling core dumps.
../src/intel/isl/isl.c:2105: FINISHME: ../src/intel/isl/isl.c:isl_surf_supports_ccs: CCS for 3D textures is disabled, but a workaround is available.
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 ()
Minor opcode of failed request: 4
Serial number of failed request: 285
Current serial number in output stream: 295
terminating with uncaught exception of type std::__1::system_error: mutex lock failed: Invalid argument
Signal 6 caught.
Segmentation fault (core dumped)
while running vagrant up command on win machine I am getting the below error:
==> kubemaster: Booting VM...
There was an error while executing VBoxManage, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["startvm", "29046172-fba4-4516-9e28-64ece907dcb7", "--type", "headless"]
Stderr: VBoxManage.exe: error: Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #3' (VERR_INTNET_FLT_IF_NOT_FOUND).
VBoxManage.exe: error: Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND)
VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component ConsoleWrap, interface IConsole
I resolved problem by installing latest virtualbox version.
I tried to debug my code with eclipse with the j-link debugger and gdb sserver and client.
I tried different settings but couldn't solve the error.
Eclipse error:
Error in final launch sequence
Failed to execute MI command:
-target-select remote localhost:2331
Error message from debugger back end:
Truncated register 16 in remote 'g' packet
Connecting to J-Link...
J-Link is connected.
Firmware: J-Link LITE-Cortex-M-5V compiled Mar 3 2016 12:49:54
GDB Server output:
Hardware: V8.00
S/N: 638100545
Feature(s): GDB
Checking target voltage...
Target voltage: 5.03 V
Listening on TCP/IP port 2331
Connecting to target...Connected to target
Waiting for GDB connection...Connected to 127.0.0.1
Reading all registers
GDB closed TCP/IP connection
Any hint what could solve my problem?
I have a Segger J-Link which I am trying to use on a Macbook running MacOS Catalina 10.15.4, with openocd and GDB against an ESP32 board. The problem is that I can not seen the device:
$ ls /dev/cu.*
/dev/cu.Bluetooth-Incoming-Port /dev/cu.JimsiPhone-WirelessiAP /dev/cu.SLAB_USBtoUART /dev/cu.usbserial-0001
None of these is the J-Link. If I run lsusb I can see it:
$ lsusb
Bus 020 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 020 Device 003: ID 1366:0101 SEGGER J-Link ARM
I have installed the "J-Link Software and Documentation Pack" downloaded from Segger. I have checked the Mac "Security and privacy" settings and it does not report that it blocked any drivers or programs from being installed or run.
On the J-Link, the green LED is on, with a very brief flash about twice per second.
I'm sure I have a piece missing, and would appreciate some help.
UPDATE: I have been following instructions here:
OpenOCD Instructions
It all works until I get to step 6, and I follow these instructions:
Serial driver instructions
The problem is, a path for the driver never shows up, as I described above. I don't think I can run OpenOCD if I can't make it talk to my J-link.
When I run openocd-esp32, I get (full paste from openocd-esp32 output is below):
Error: No J-Link device found.
The contents of esp32-wroom-32.cfg is:
echo "WARNING: boards/esp-wroom-32.cfg is deprecated, and may be removed in a future release."
set ESP32_FLASH_VOLTAGE 3.3
source [find target/esp32.cfg]
Here is the full paste:
Jims-MacBook-Pro-486:~ jim$ openocd -f interface/jlink.cfg -f board/esp-wroom-32.cfg -c "program_esp32 build/hello-world.bin 0x10000 verify exit"
Open On-Chip Debugger v0.10.0-esp32-20200420 (2020-04-20-16:15)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
WARNING: boards/esp-wroom-32.cfg is deprecated, and may be removed in a future release.
Info : Configured 2 cores
Error: No J-Link device found.
** OpenOCD init failed **
shutdown command invoked
Assertion failed: (jtag_trst == 0), function jtag_checks, file src/jtag/core.c, line 343.
Abort trap: 6
Running JLinkExe does find the J-Link:
Jims-MacBook-Pro-486:~ jim$ JLinkExe
SEGGER J-Link Commander V6.80b (Compiled Jun 5 2020 17:42:04)
DLL version V6.80b, compiled Jun 5 2020 17:41:46
Connecting to J-Link via USB...Updating firmware: J-Link V11 compiled Apr 23 2020 16:49:23
Replacing firmware: J-Link V11 compiled Aug 14 2019 16:21:09
Waiting for new firmware to boot
New firmware booted successfully
O.K.
Firmware: J-Link V11 compiled Apr 23 2020 16:49:23
Hardware version: V11.00
S/N: 51000936
License(s): GDB
VTref=0.000V
Type "connect" to establish a target connection, '?' for help
J-Link>
After doing the above I now get a different error message when running openocd-esp32 (perhaps because of the J-Link FW upgrade?). Initially it complained that there was not an adapter speed set, so I modified interface/jlink.cfg and added:
adapter_khz 3000
I now get a different error:
Error: JTAG scan chain interrogation failed: all ones
Which I have been Googling, and which could mean a bad board or still another configuration issue. There is no SD card in the SD card socket and no other SPI devices on the board, although the ESP32-WROVER-32U has SPI flash on it.
Here is the complete output from openocd-esp32:
Jims-MacBook-Pro-486:~ jim$ openocd -f interface/jlink.cfg -f board/esp-wroom-32.cfg -c "program_esp32 build/hello-world.bin 0x10000 verify exit"
Open On-Chip Debugger v0.10.0-esp32-20200420 (2020-04-20-16:15)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 3000 kHz
WARNING: boards/esp-wroom-32.cfg is deprecated, and may be removed in a future release.
Info : Configured 2 cores
Info : J-Link V11 compiled Apr 23 2020 16:49:23
Info : Hardware version: 11.00
Info : VTarget = 0.000 V
Info : clock speed 3000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: esp32.cpu0: IR capture error; saw 0x1f not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : Listening on port 3333 for gdb connections
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: esp32.cpu0: IR capture error; saw 0x1f not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : cpu0: Debug controller 0 was reset.
Info : cpu0: Core 0 was reset.
Error: esp32_soc_reset: Couldn't halt target before SoC reset
embedded:startup.tcl:449: Error: ** Unable to reset target **
in procedure 'program_esp32'
in procedure 'program_esp' called at file "/Users/jim/.espressif/tools/openocd-esp32/v0.10.0-esp32-20200420/openocd-esp32/share/openocd/scripts/target/esp32.cfg", line 64
in procedure 'program_error' called at file "/Users/jim/.espressif/tools/openocd-esp32/v0.10.0-esp32-20200420/openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 75
at file "embedded:startup.tcl", line 449
Warn : Flash driver of esp32.flash does not support free_driver_priv()
Warn : Flash driver of esp32.irom does not support free_driver_priv()
Warn : Flash driver of esp32.drom does not support free_driver_priv()
Success! This circuit used the Segger 10 pin needle connector. On that connector pin 1 is VTREF and on my board it was left floating, when it should have been connected to V3.3. I connected it and:
Jims-MacBook-Pro-486:~ jim$ openocd -f interface/jlink.cfg -f board/esp32-wrover.cfg
Open On-Chip Debugger v0.10.0-esp32-20200420 (2020-04-20-16:15)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 1000 kHz
WARNING: boards/esp32-wrover.cfg is deprecated, and may be removed in a future release.
If your board is ESP32-WROVER-KIT, use board/esp32-wrover-kit-1.8v.cfg instead.
Info : Configured 2 cores
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : J-Link V11 compiled Apr 23 2020 16:49:23
Info : Hardware version: 11.00
Info : VTarget = 3.290 V
Info : clock speed 1000 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset.
Info : esp32: Core 0 was reset.
Info : esp32: Debug controller 1 was reset.
Info : esp32: Core 1 was reset.
Info : Listening on port 3333 for gdb connections
I would suggest to validate your setup step by step - I personally do not like big bang integrations.
Verify that your the Segger software can see your JLink probe - the good thing is that lsusb can see it. JLink Commander should provide some useful information.
Launch openocd without any executable-related arguments: openocd -f interface/jlink.cfg -f board/esp-wroom-32.cfg
Verify that basic commands are working, i.e. resetting the CPU, displaying registers, reading/writing memory.
If you you are still experimenting issues, double-check your wiring - see here for more information.
I have created a service which starts python script on system boot. The script must run forever. Script receives some data on UDP and reverts after processing it. It performs some i2c, spi and GPIO related tasks in it. Its working without any error.
One html page always remains open in my raspberry pi forever.
The python script automatically stop after approx 8 to 10 hours. When I explored, I found that it is following error.
Error in `/usr/bin/python3': free(): invalid pointer: 0x00403eb0
Dec 24 19:53:03 raspberrypi systemd[1]: platform_slave.service: Main process exited, code=killed, status=6/ABRT
Dec 24 19:53:03 raspberrypi systemd[1]: platform_slave.service: Unit entered failed state.
Dec 24 19:53:03 raspberrypi systemd[1]: platform_slave.service: Failed with result 'signal'.
I already explored following link but nothing found worthy.
*** Error in `python3': free(): invalid pointer: 0xb70c3578 *** Aborted (core dumped)
Does anyone having idea about above errors?
There is indeed a bug in Raspian (or spidev up to 3.5, or the SPI Linux driver itself).
The interface will cause the program to crash after 2^32 bytes sent. "try... except..." does not help.
Please see this discussion for more details.
Why does my long-running python script crash with "invalid pointer" after running for about 3 days?