Im running the macro
if $(ConfigurationName) == Debug "xcopy /R /Y $(ProjectDir)Configuration\* $(ProjectDir)$(OutDir)"
after i have built the project.
The purpose of this line is to detect Debug Compile Mode, and in that case overwrite a dll with another dll that contains simmed values.
Thats why i included the /R /Y in the xcopy
All the files that need to be copied are in the Configuration Folder within the ProjectDir.
Im not sure if im missing some copy parameter, that prevents me from overwriting a dll or if the string has some sorta error in it.
My formating was off, i figured it out
if $(ConfigurationName) == Debug (
xcopy /R /Y "$(ProjectDir)Configuration\*" "$(ProjectDir)$(OutDir)"
)
Related
I wrote a script that wil copy a particular folder to a list of hosts, stored in a text file.
It works great from a short source path but fails to find the folder when located in a long path, which is how i need it to function.
Thsi what i tried, which should copy the folder to the list in the text.
Code below
set source=%~dp0%data
set source2=%~dp0%\target.txt
FOR /F "TOKENS=*" %%A IN (%source2%) DO XCOPY /d /y /f /i "%source%" "\%%~A\c$\users\test\test"
pause
Error: The system cannot find the file C:\Users\lenovo\OneDrive\Company\Red.
The above path is not the full path.
I understand there may well be more modern ways to achive this such as ropcopy or powershell and am open to ideas if this is not teh best method.
Thanks in advance for any help
Hello I use the following code inside a BAT file to move files but the xcopy fails to overwrite the files:
xcopy "C:\Users\AGL\Desktop\DATA\MT4BACK" "C:\Users\AGL\AppData\Roaming\MetaQuotes\Terminal\2010C2441A263399B34F537D91A53AC9" /e /y /r
Please let me know what migth be the problem
For more info run xcopy help in CMD, this will explain you all possibilities.
You can try to use different options then.
EDIT
You can add PAUSE at the end of bat file, so you can read xcopy output info
I am running below command to run Soapui Test suite and it is working fine
testrunner.bat -s"TestSuite4" "D:\Invesco\JP Groovy Code\ExploreGroovy.xml"
I ahve also used with below command and it is working fine as well
testrunner.bat -s"TestSuite4" "%USERPROFILE%\ExploreGroovy.xml"
Now I have added one Envrionment variable 'EnvP' and its value id 'D:\Invesco' and tried with following command but it is not working.
testrunner.bat -s"TestSuite4" "%EnvP%\ExploreGroovy.xml"
Can some one help me in this. I don't want to give hard coded path of any drive. Please suggest if anyone has any other solution.
Thanks.
the process starting testrunner.bat (probably explorer.exe?) must
know about the new variable. have you tried logging out and in again
after setting it?
if it is cmd, try finding the variable with set | find "EnvP". If it is not there, you need to start a new cmd session.
Use these commands and you should see why it fails:
#echo "%EnvP%"
#if not exist "%EnvP%\ExploreGroovy.xml" #echo Ouch!
#pause
testrunner.bat -s"TestSuite4" "%EnvP%\ExploreGroovy.xml"
#pause
For all my SoapUI projects I have multiple .bat scripts in the same location as the project.xml file to run different sets of test suites, and all of it goes into your source repository.
IF NOT DEFINED SOAPUI_ROOT SET SOAPUI_ROOT=%ProgramFiles%\SmartBear\soapUI-Pro-4.6.4
REM make certain we are where we _think_ we are
CD %~dp0
REM cleanup previous results
DEL /f /q *.log*
RMDIR /s /q results
REM run the tests
CALL "%SOAPUI_ROOT%\bin\testrunner.bat" -s"Smoke TestSuite" -fresults My-soapui-project.xml
REM determine if there are failures
IF errorlevel 0 (
ECHO All tests passed.
PAUSE
EXIT 0
) ELSE (
ECHO There are failures!
PAUSE
EXIT 100
)
I'm sending commands to a remote computer in order to have it copy a file.
I want the file to be copied, but not to overwrite the previous file with the same name (if it exists).
I also need the command to run without any prompts (xcopy likes to prompt whether the target name I've specified is file or directory, and it will also prompt about overwriting a file).
I have good results with xcopy /d.
It will copy NEWER files, and since we can assume that existing files have same time-stamp, you will copy only files that don't exist.
just in case anyone else finds this:
robocopy x:\sourcefolder Y:\destfolder /s /e /r:0 /z
much better than xcopy, even gives you a table at the end informing of any failed or skipped files. Doesn't prompt to not overwrite.
Well, there's a certain remedy! It has helped me with saving much of my effort and time on Win10 while writing a setup for our product demo.
Just try to use piping:
#ECHO N|COPY /-Y SourceFiles Destination
As an example I used this piece of code so that I would have a clean gentle quiet and safe copy!
#FOR /D %%F in ("FooPath") DO #(
#ECHO N|COPY /-Y ^"%%~npdxF\*.*^" ^"GooPath^" 3>NUL 2>NUL >NUL
)
where obviously FooPath is the source and GooPath is the destination.
Enjoy!
(main source: https://ss64.com/nt/copy.html)
Following command copy files and folder but not override file if already exist.
xcopy "*.*" "C:\test\" /s /y /d
No way to make it NOT overwrite as far as I know. but /Y will make it overwrite. and /I will get rid of the file/dict prompt. See xcopy /? for all options
You can also use the replace command. It has two modes: to add files that don't exist there or replace files that do exist. You want the previous mode:
replace <path1> <path2> /A
I had to copy AND rename files, so I got the prompt about creating a file or a directory.
This is the, rather "hackish" way I did it:
ECHO F | XCOPY /D "C:\install\dummy\dummy.pdf" "C:\Archive\fffc810e-f01a-47e8-a000-5903fc56f0ec.pdf"
XCOPY will use the "F" to indicate it should create the target as a file:
C:\install>ECHO F | XCOPY /D "C:\install\dummy\dummy.html" "C:\Archive\aa77cd6e-1d19-4eb4-b2a8-3f8fe60daf00.html"
Does C:\Archive\aa77cd6e-1d19-4eb4-b2a8-3f8fe60daf00.html specify a file name or directory name on the target
(F = file, D = directory)? F
C:\install\dummy\dummy.html
1 File(s) copied
I've also verified this command leaves existing files alone. (You should too :-)
I am using XCOPY in a post-build event to copy compiled DLLs from their output folders to the main app's output folder. The DLLs are being copied to a "Modules" subfolder in the main app output folder, like this:
xcopy "$(TargetPath)" "$(SolutionDir)Prism4Demo.Shell\$(OutDir)Modules\"
The command works fine if the Modules folder exists, but I have discovered during testing that if the folder doesn't exist, XCOPY doesn't create it, and the command fails.
Is there an XCOPY switch that will cause the folder to be created if it doesn't exist? If not, what would I add to my post-build event to create the folder if it doesn't exist? Thanks for your help.
Answer to use "/I" is working but with little trick - in target you must end with character \ to tell xcopy that target is directory and not file!
Example:
xcopy "$(TargetDir)$(TargetName).dll" "$(SolutionDir)_DropFolder" /F /R /Y /I
does not work and return code 2, but this one:
xcopy "$(TargetDir)$(TargetName).dll" "$(SolutionDir)_DropFolder\" /F /R /Y /I
Command line arguments used in my sample:
/F - Displays full source & target file names
/R - This will overwrite read-only files
/Y - Suppresses prompting to overwrite an existing file(s)
/I - Assumes that destination is directory (but must ends with \)
I tried this on the command line using
D:\>xcopy myfile.dat xcopytest\test\
and the target directory was properly created.
If not you can create the target dir using the mkdir command with cmd's command extensions enabled like
cmd /x /c mkdir "$(SolutionDir)Prism4Demo.Shell\$(OutDir)Modules\"
('/x' enables command extensions in case they're not enabled by default on your system, I'm not that familiar with cmd)
use
cmd /?
mkdir /?
xcopy /?
for further information :)
I hate the PostBuild step, it allows for too much stuff to happen outside of the build tool's purview. I believe that its better to let MSBuild manage the copy process, and do the updating. You can edit the .csproj file like this:
<Target Name="AfterBuild" Inputs="$(TargetPath)\**">
<Copy SourceFiles="$(TargetPath)\**" DestinationFiles="$(SolutionDir)Prism4Demo.Shell\$(OutDir)Modules\**" OverwriteReadOnlyFiles="true"></Copy>
</Target>
Use the /i with xcopy and if the directory doesn't exist it will create the directory
for you.
You could use robocopy:
robocopy "$(TargetPath)" "$(SolutionDir)Prism4Demo.Shell\$(OutDir)Modules" /E
Simple short answer is this:
xcopy /Y /I "$(SolutionDir)<my-src-path>" "$(SolutionDir)<my-dst-path>\"
Simply type in quotes slash delimiter "/" and add to final destination 2 back-slashes "\\"
It's will be create New folders to copy and copy need file(-s).
xcopy ".\myfile" "....folder1/folder2/destination\\"
I tried this on the command.it is working for me.
if "$(OutDir)"=="bin\Debug\" goto Visual
:TFSBuild
goto exit
:Visual
xcopy /y "$(TargetPath)$(TargetName).dll" "$(ProjectDir)..\Demo"
xcopy /y "$(TargetDir)$(TargetName).pdb" "$(ProjectDir)..\Demo"
goto exit
:exit
Try /E
To get a full list of options: xcopy /?