I am running below command to run Soapui Test suite and it is working fine
testrunner.bat -s"TestSuite4" "D:\Invesco\JP Groovy Code\ExploreGroovy.xml"
I ahve also used with below command and it is working fine as well
testrunner.bat -s"TestSuite4" "%USERPROFILE%\ExploreGroovy.xml"
Now I have added one Envrionment variable 'EnvP' and its value id 'D:\Invesco' and tried with following command but it is not working.
testrunner.bat -s"TestSuite4" "%EnvP%\ExploreGroovy.xml"
Can some one help me in this. I don't want to give hard coded path of any drive. Please suggest if anyone has any other solution.
Thanks.
the process starting testrunner.bat (probably explorer.exe?) must
know about the new variable. have you tried logging out and in again
after setting it?
if it is cmd, try finding the variable with set | find "EnvP". If it is not there, you need to start a new cmd session.
Use these commands and you should see why it fails:
#echo "%EnvP%"
#if not exist "%EnvP%\ExploreGroovy.xml" #echo Ouch!
#pause
testrunner.bat -s"TestSuite4" "%EnvP%\ExploreGroovy.xml"
#pause
For all my SoapUI projects I have multiple .bat scripts in the same location as the project.xml file to run different sets of test suites, and all of it goes into your source repository.
IF NOT DEFINED SOAPUI_ROOT SET SOAPUI_ROOT=%ProgramFiles%\SmartBear\soapUI-Pro-4.6.4
REM make certain we are where we _think_ we are
CD %~dp0
REM cleanup previous results
DEL /f /q *.log*
RMDIR /s /q results
REM run the tests
CALL "%SOAPUI_ROOT%\bin\testrunner.bat" -s"Smoke TestSuite" -fresults My-soapui-project.xml
REM determine if there are failures
IF errorlevel 0 (
ECHO All tests passed.
PAUSE
EXIT 0
) ELSE (
ECHO There are failures!
PAUSE
EXIT 100
)
Related
How can I run a CMD or .bat file in silent mode? I'm looking to prevent the CMD interface from being shown to the user.
Include the phrase:
#echo off
right at the top of your bat script.
I have proposed in StackOverflow question a way to run a batch file in the background (no DOS windows displayed)
That should answer your question.
Here it is:
From your first script, call your second script with the following line:
wscript.exe invis.vbs run.bat %*
Actually, you are calling a vbs script with:
the [path]\name of your script
all the other arguments needed by your script (%*)
Then, invis.vbs will call your script with the Windows Script Host Run() method, which takes:
intWindowStyle : 0 means "invisible windows"
bWaitOnReturn : false means your first script does not need to wait for your second script to finish
See the question for the full invis.vbs script:
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run """" & WScript.Arguments(0) & """" & sargs, 0, False
^
means "invisible window" ---|
Update after Tammen's feedback:
If you are in a DOS session and you want to launch another script "in the background", a simple /b (as detailed in the same aforementioned question) can be enough:
You can use start /b second.bat to launch a second batch file asynchronously from your first that shares your first one's window.
I think this is the easiest and shortest solution to running a batch file without opening the DOS window, it can be very distracting when you want to schedule a set of commands to run periodically, so the DOS window keeps popping up, here is your solution.
Use a VBS Script to call the batch file ...
Set WshShell = CreateObject("WScript.Shell" )
WshShell.Run chr(34) & "C:\Batch Files\ mycommands.bat" & Chr(34), 0
Set WshShell = Nothing
Copy the lines above to an editor and save the file with .VBS extension. Edit the .BAT file name and path accordingly.
Use Advanced BAT to EXE Converter from http://www.battoexeconverter.com
This will allow you to embed any additional binaries with your batch file in to one stand alone completely silent EXE and its freeware
Use Bat To Exe Converter to do this
http://download.cnet.com/Bat-To-Exe-Converter/3000-2069_4-10555897.html (Choose Direct Download Link)
1 - Open Bat to Exe Converter, select your Bat file.
2 - In Option menu select "Invisible Application", then press compile button.
Done!
Try SilentCMD. This is a small freeware program that executes a batch file without displaying the command prompt window.
If i want to run command promt in silent mode, then there is a simple vbs command:
Set ws=CreateObject("WScript.Shell")
ws.Run "TASKKILL.exe /F /IM iexplore.exe"
if i wanted to open an url in cmd silently, then here is a code:
Set WshShell = WScript.CreateObject("WScript.Shell")
Return = WshShell.Run("iexplore.exe http://otaxi.ge/log/index.php", 0)
'wait 10 seconds
WScript.sleep 10000
Set ws=CreateObject("WScript.Shell")
ws.Run "TASKKILL.exe /F /IM iexplore.exe"
I'm pretty confident I like this method the best. Copy and paste the code below into a .vbs file. From there you'll call the batch file... so make sure you edit the last line to specify the path and name of the batch file (which should contain the file you'd like to launch or perform the actions you need performed)
Const HIDDEN_WINDOW = 12
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set objStartup = objWMIService.Get("Win32_ProcessStartup")
Set objConfig = objStartup.SpawnInstance_
objConfig.ShowWindow = HIDDEN_WINDOW
Set objProcess = GetObject("winmgmts:root\cimv2:Win32_Process")
errReturn = objProcess.Create("C:\PathOfFile\name.bat", null, objConfig, intProcessID)
It definitely worked for me. Comments are welcomed :)
Another way of doing it, without 3rd party programs nor converters ("batch to exe" programs actually just put your batch file in the tmp folder and then run it silently so anyone can just fetch it from there an get your code) no vbs files (because nobody knows vbs) just one line at the beginning of the batch file.
#echo off > NUL
The below silent .bat file code prevents the need to have two bat files (using "goto" and ":").
It does it all in the same .bat file. Tested and confirmed working in Windows 10
Make sure you replace "C:\pathToFile\ThisBatFile.bat " with the path to this same .bat file! Keep the space after ".bat".
#echo off
if [%1]==[] (
goto PreSilentCall
) else (
goto SilentCall
)
:PreSilentCall
REM Insert code here you want to have happen BEFORE this same .bat file is called silently
REM such as setting paths like the below two lines
set WorkingDirWithSlash=%~dp0
set WorkingDirectory=%WorkingDirWithSlash:~0,-1%
REM below code will run this same file silently, but will go to the SilentCall section
cd C:\Windows\System32
if exist C:\Windows\Temp\invis.vbs ( del C:\Windows\Temp\invis.vbs /f /q )
echo CreateObject("Wscript.Shell").Run "C:\pathToFile\ThisBatFile.bat " ^& WScript.Arguments(0), 0, False > C:\Windows\Temp\invis.vbs
wscript.exe C:\Windows\Temp\invis.vbs Initialized
if %ERRORLEVEL%==0 (
echo Successfully started SilentCall code. This command prompt can now be exited.
goto Exit
)
:SilentCall
cd %WorkingDirectory%
REM Insert code you want to be done silently.
REM Make sure this section has no errors as you won't be able to tell if there are any,
REM since it will be running silently. You can add a greater than symbol at the end of
REM your commands in this section to output the results to a .txt file for the purpose
REM of debugging this section of code.
:Exit
If your .bat file needs more than just the "Initialized" argument (which tells the bat file to go to :SilentCall section), add "^& WScript.Arguments(1)," , "^& WScript.Arguments(2)," ,etc. depending on the number of arguments, then edit the line where wscript.exe is called:
"wscript.exe C:\Windows\Temp\invis.vbs Initialized BatFileArgOne BatFileArgTwo"
I'm created RunApp to do such a job and also using it in my production env, hope it's helps.
The config like below:
file: config.arg
:style:hidden
MyBatchFile.bat
arg1
arg2
And launch runapp.exe instead.
I am trying to redirect a PS output to a file and process it further.
For this I am using the Printer Port Redirection RedMon which is sending the output to CMD.exe
C:\Windows\system32\cmd.exe
As arguments I expected that something like the following should work, but it does not. "%1" contains the user input for filename.
/c >"%1"
or
/c 1>"%1"
or
/c |"%1"
or
/c > "%1" 2>&1
What almost works if I send the output to a batch file which writes it then to file.
/c WriteOutput.bat "%1"
However, the batch file is somehow altering the file (skipping empty lines, and ignoring exclamation marks and so on...)
If possible I want to avoid a batch file. Is there a way to get it "directly" to a file?
Select "Print to FILE" in the printer options is not an option for me. I want the same end result but via cmd.exe being able to process it further.
Any ideas?
Edit:
Well, that's the batch file I used. It neglects empty lines and space at the beginning.
#echo off
setlocal
set FileName=%1
echo(>%FileName%.ps
for /F "tokens=*" %%A in ('more') do (
echo %%A>>%FileName%.ps
)
Well, so far I still haven't found a direct way to write STDIN via RedMon via CMD.exe to a file. As #aschipfl wrote, all the versions with for /F will skip lines and ignore certain characters.
However, with the following batch script (via RedMon) I end up with a "correct looking" file on disk.
C:\Windows\system32\cmd.exe /c WritePS.bat "%1"
"%1" contains the user input for filename without extension.
The Batch-File WritePS.bat looks as simple as this:
#echo off & setlocal
set FileName=%1.ps
more > "%FileName%"
However,
the resulting Postscript file is different from a file which I "Print to FILE" via the Postscript-Printer setup. I am pretty sure that all the printer settings which I can set are the same in both cases.
If anybody has an idea why there might be a difference, please let me know.
My Problem
As there are a ton of threads that address 'using a batch file to return file modify date' (or delete files older than, etc) - let me first specify my issue.
I'm looking to create a batch (not PowerShell, etc) that will return the last modify date of a specific file given UNC path and filename.
Code, Attempt 1
I've taken a peek at a few potential solutions on other threads, but I've run into a number of unique issues. The first and most obvious solution for this would be the "ForFiles" command in batch. For example:
set myPath=\\myUNCpath
set myFile=myFileName.csv
forfiles /p "%myPath%" /m %myFile% /c "GoTo OldFile" /d -6
Thus, if the file is older than I want -- jump to a specific section of my batch for that. However, this yields the error:
ERROR: UNC paths (\machine\share) are not supported.
However, this cmd won't work due to the use of UNC (which is critical as this batch is called by system's task scheduler). So it seems like the 'ForFiles' cmd is out.
Code, Attempt 2
I could go a more round about way of doing it, but simply retrieving the last modified date of the file (which in batch would return a string). I can truncate the string to the necessary date values, convert to a date, and then compare to current date. To do that, I've also looked into just using a for loop such as:
set myFile=\\myUNCpath\myFileName.csv
echo %myFile%
pause
FOR %%f IN (%myFile%) DO SET myFileDate=%%~tf
echo %myFileDate%
pause
Though my first debug echo provides the proper full file name, my second debug just returns ECHO is off., which tells me it's either not finding the file or the for loop isn't returning the file date. Not sure why.
I've also tried minor changes to this just to double check environmental variable syntax:
FOR %%f IN (%myFile%) DO SET myFileDate=%%~ta
Returns %ta
And finally:
FOR %%f IN (%myFile%) DO SET myFileDate=%~ta
Which without the extra '%', just crashes the batch.
I'm really at a loss at this point. So any tips or guidance would be greatly appreciated!
Using forfiles to a UNC path can be used using PushD
For just echoing the file older than x in UNC path, simply just use
PushD %myPath% &&(
forfiles -s -m %myFile% -d -6 -c "cmd /c echo /q #file
) & PopD
Here is one way how to use goto if file older than x found in UNC path using your examples.
if not exist "C:\temp" mkdir C:\temp
if not exist "C:\temp\test.txt" echo.>"c:\temp\test.txt"
break>"c:\temp\test.txt"
set myPath=\\myUNCpath
set myFile=myFileName.csv
PushD %myPath% &&(
forfiles -s -m %myFile% -d -6 -c "cmd /c echo /q #file >> c:\temp\test.txt"
) & PopD
for /f %%i in ("C:\temp\test.txt") do set size=%%~zi
if %size% gtr 0 goto next
:next
Huge thanks to both #Squashman and #MadsTheMan for the help. Luckily this batch finally is the piece of code that I can take to my boss to push switching over to at least using PowerShell!
Anyway, for those of you looking for the best way to get a UNC path file's modify date, here is what I've come up with. Not very different than other threads (and a thanks goes out to Squashman for spotting my missing " " in the for loop).
set myFile=\\myUNCpath\myFileName.ext
FOR %%f IN ("%myFile%") DO SET myFileDate=%%~tf
::And if you'd like to try to do long winded calculations you can further break the dates down via...
set fileMonth=%myFileDate:~0,2%
set fileDay=%myFileDate:~3,2%
set fileYear=%myFileDate:~6,4%
set currentDate=%date%
set currentMonth=%currentDate:~4,2%
set currentDay=%currentDate:~7,2%
set currentYear=%currentDate:~10,4%
The plan was to then convert the strings to integers, and then use a switch-case block to determine if the variance between dates was acceptable... blah blah blah.
Long story short - if you are limited to batch (and not creating secondary files -- such as a csv or the temp file suggested by MadsTheMan) you're going to have a really long script on your hands that still might have flaws (like leap year, etc unless you're adding even MORE code), when you could just make the comparison calculation using one line of code in other programs.
Basically just attempting to create a very basic program that will display the last modified date of a file on our server. Problem is I have no idea how to write it. This is what I attempted
cd \\Server\Folder
msg dir
I also ran into the problem "CMD Does not support UNC Paths as Current Directories" when I tried to change the CD to our servers directory.
What I would like it to do is display in a dialog box the modified date of a "Text.txt" located on our server \\Server\Folder
Any and all help is appreciated
Next .bat script should work:
set "_folder=\\Server\Folder"
set "_filename=Text.txt"
set "_filedatetime=N/A"
pushd %_folder%
for %%G in (%_filename%) do (
rem echo %%~tG %%~fG
if not "%%~tG"=="" set "_filedatetime=%%~tG"
)
popd
echo file %_folder%\%_filename% date and time: %_filedatetime%
Note there is no dialog box in pure cmd command line interpreter, try set /P.
Resources:
SET: Display, set, or remove CMD environment variables
PUSHD, POPD: and UNC Network paths
FOR commands
~ Parameter Extensions
I need to make a script that automates the following:
Read comma or tab separated values from the input file
Construct a command from them and run it
Get the command output, looks for substrings in it and update the log file based on the existence of a substring
I do this in Windows Server 2008, so I can do this in CMD or PowerShell but I am not sure they provide such possibilities. I can try Perl or C#, but I want to try a minimalistic approach first.
Minimalistic as far as coding - Perl
Minimalistic as far as installing new software - PowerShell (IIRS W.S.2008 included that?)
So many answers, and none providing a solution that would meet the requirements...
You didn't say what are the conditions to be checked against each CSV row, and what the CSV would be like, and what the log would be like - so I made it all up... Here's an example in BATCH:
#echo off
set csvfile=input.csv
set logfile=output.log
for /F "tokens=1,2,3 delims=," %%a in (%csvfile%) do call :processline "%%a" "%%b" "%%c"
exit /B 0
:processline
set param=%~3
set check=%param:um=%
rem if they are not equal - substring 'um' exists in it.
if not "$%check%" == "$%param%" (
rem this passes all params to output.
rem I'm not calling echo directly here, because there might be symbols, that will confuse CMD at the end of the %*.
call :output %*>> %logfile%
)
exit /B 0
:output
set colA=%~1
set colB=%~2
set colC=%~3
rem output to log
echo [%DATE% %TIME%] (%colB%) %colA% %colC%.
exit /B 0
Here's the example input file that I tested it with:
foo,1,dum
bar,3,dim
baz,15,dirum
And here's the resulting log messages:
[2009-10-14 14:57:35.87] (1) foo dum.
[2009-10-14 14:57:35.89] (15) baz dirum.
I hope this shows clearly, that BATCH is not nasty nor it is hard to use. :P
If you have further question about BATCH - don't be shy, post them all on SO. ;)
I would recommend going with Python (or Perl if you swing that way). These are very minimal tools to have to install on a machine and add all the functionality you need.
The string handling you describe is unpleasant in any shell (Bash included) unless you are using sed or awk... and that just gets esoteric. In the end you'll retain more hair if you go straight to a scripting language first.
Perl was called into existence to quickly solve these kind
of tasks. It should not take more 20 lines for this
particular problem.
It is also really easy to install:
Download ActivePerl (17.7 MB, Perl 5.10.)
Run the installer.