I have created a view under X branch. checked in the files successfully. But while merging the files I gave incorrect command and my files were merged into Y branch which is obsolete. How is it possible? It means I can merge files even to an Obsolete branch? Kindly clarify.
If only the branch type is locked obsolete, that wouldn't prevent the branch (instance of a branch type) to be modified.
You can check the lock status with:
cleartool lslock <branch_name>#/vobs/avob
Or, for the brtype:
cleartool lslock brtype:<branch_name>#/vobs/avob
As Ian W points out in the comments:
If you are using UCM, there's a lock on the project and a locks on the streams. Pretty sure it's the lock on stream you want to have in place.
True: a lock on the UCM stream would lock the associated non-UCM branch.
Related
We recently switched from svn to mercurial. We're using Aptana as our IDE with the MercurialEclipse plugin, along with BitBucket for our repositories and SourceTree as our (additional) source control GUI.
I created 2 new files in Aptana, and committed each of them. Now in the Synchronize view, where the 2 files are listed as "outgoing", I'd like to push only one of them. I avoided using the "push all" icon at the top which would push all outgoing changes - instead I right-clicked a specific file in the outgoing list and chose "push" from the context menu. However, this caused both outgoing changes to be pushed. I can't seem to find any option to push only a specific file or subset of files of the committed changes. Is there any way to accomplish this in Aptana?
Note: My answer doesn't relate to Aptana, but instead covers what I think your issue is.
I think the main problem is a misunderstanding of how Mercurial stores its changes, which coming from a Subversion background is perfectly reasonable.
In Subversion, change history can be considered to be stored per file. That is, if you change two files and commit them, you can easily, and often do, have a situation where files in your working copy are at different versions.
In Mercurial, change history is stored across the whole repository. Committing will create a new "Changeset", which stores the state of the entire repository at that time. When you decide to push a change out to another repository, all modifications (or adds, or deletes, or...) will be pushed out with that change.
A caveat is that when you decide to commit a new changeset to your repository, you can selectively include or exclude files. Files not included will remain in your working copy as pending modifications, which can be committed in a new changeset.
I hope that makes sense to you - if you already understand it, it's a logical concept, but I find it tricky to explain.
So, on to your problem.
Lets say you have two files in your repository, file1 and file2 (it's that or foo and bar). You've changed them both, but they relate to different issues - they can be committed as different changesets:
$ hg log
changeset 0:....
summary: First commit
$ hg st
M file1
M file2
$ hg commit -I file1 -m "Changed file1"
$ hg log
changeset 1:....
summary: Changed file1
changeset 0:....
summary: First commit
$ hg st
M file2
Here you can see that we've committed only one file into the repository, and it's made a new changeset with the complete state of the repository at that time, minus the changes to file2. We can now do the same, committing file2, which will create another changeset. The problem with this approach is that changesets are ordered according to their parent, and so you couldn't easily push just the change to file2, without also pushing its parent - but it may be closer to what you're after.
TL;DR : SVN stores the state of individual files, Mercurial stores the state of the repository as a whole.
I very much recommend reading Mercurial: The Definitive Guide. It's a little out-of-date in places, but I think it will do a much better job of getting the concept across.
Perhaps I'm biased from years of svn but why would I ever want to merge with a different branch then make some changes before committing. The hg output itself suggests otherwise:
(branch merge, don't forget to commit)
Dear hg, then why didn't you just do it for me?
Because a merge operation is not guaranteed to produce correct output (automatic merges can use bad heuristics for how to deal with conflicts, manual merges can suffer from human error). Usually, what you will do is the following:
Merge.
Build.
Test.
If the test failed, fix the issue, go back to 2.
Commit.
Mercurial does not suggests otherwise, it 's just reminder: "All merge-related changes stored only on Working Dir, commit results into repository for permanent storing" and doesn't prohibit you to make some additional changes in code before commit.
But separation of tasks (merge and not-related to merge changes - i.e changes not initiated by merge-conflicts) into separate changesets is good idea anyway
Do you know any tool that support the followings:
eclipse integration (not mandatory)
merge tracking
interactive merge
merging with selecting changesets, but commit them one-by-one to preserve commit comments
So the flow I expect:
picking the source to merge to workspace
choosing revisions to merge
the program would do the merge for the first revision, would pop up conflict resolving if any, and if no conflict it would commit with the original commit comment + merging info with appropiate svn properties
go to next revision.
Do you know such tool?
No, I doubt any tool does this exactly as you describe - why would they when you can a) replicate the functionality by merging 1 revision at a time anyway, b) prefer to make the commit a manual process so the operator can check the merged results. Having merges commit automatically is just slightly optimistic.
You could write such a tool with script - for each revision, merge, fetch original log comment, commit.
Note you don't need to worry about properties as they are merged automatically as part of the merge process.
When SVN with merge tracking works, it's really nice, I love it. But it keeps getting twisted up. We are using TortoiseSVN. We continuously get the following message:
Error: Reintegrate can only be used if revisions 1234 through 2345 were previously merged from /Trunk to the reintegrate source, but this is not the case
For reference, this is the method we are using:
Create a Branch
Develop in the branch
Occasionally Merge a range of revisions from the Trunk to the Branch
When branch is stable, Reintegrate a branch from the branch to the trunk
Delete the branch
I Merge a range of revisions from the trunk to the branch (leaving the range blank, so it should be all revisions) just prior to the reintegrate operation, so the branch should be properly synced with the trunk.
Right now, the Trunk has multiple SVN merge tracking properties associated with it. Should it? Or should a Reintegrate not add any merge tracking info?
Is there something wrong with our process? This is making SVN unusable - 1 out of every 3 reintegrates forces me to dive in and hack at the merge tracking info.
This problem sometimes happens when a parial merge has been done from trunk to branch in the past. A partial merge is when you perform a merge on the whole tree but only commit part of it. This will give you files in your tree that have mergeinfo data that is out of sync with the rest of the tree.
The --reintegrate error message above should list the files that svn is having a problem with (at least it does in svn 1.6).
You can either:
Merge the problem files manually from trunk to branch, using the range from the error message. Note: you must subtract 1 from the start of the range, so the command you'd run would be:
cd <directory of problem file in branch working copy>
svn merge -r1233:2345 <url of file in trunk>
svn commit
or
If you're certain that the contents of the files in your branch are correct and you just want to mark the files as merged, you could use the --record-only flag to svn merge:
cd <directory of problem file in branch working copy>
svn merge --record-only -r1233:2345 <url of file in trunk>
svn commit
(I think you can use --record-only on the entire tree, but I haven't tried it and you'd have to be absolutely sure that there are no real merges that need to come from trunk)
Bunny hopping might be the solution.
Basically, instead of continuously merging trunk changes into a single branch (branches/foo, let's call it), when you want to pull those changes from trunk:
Copy trunk to a new branch (branches/foo2).
Merge in the changes from the old branch (merge branches/foo into branches/foo2).
Delete the old branch (delete branches/foo).
Your problem is that you're trying to use Reintegrate merge on a branch that has been 'corrupted' by having a 'half merge' already done on it. My advice is to ignore reintegrate and stick to plain on revision merging if this is your workflow.
However, the big reason you get errors is because SVN is performing some checks for you. In this case, if the merge has extra mergeinfo from individual files in there, then svn will throw a wobbly and prevent you from merging - mainly because this case can product errors that you might not notice. This is called a subtree merge in svn reintegrate terminology (read the Reintegrate to the Rescue section, particularly the controversial reintegrate check at the end).
You can stop recording mergeinfo when you perform your intermediary merges, or just leave the branch alone until its ready - then the merge will pick up changes made to trunk. I think you can also byass this check by only ever merging the entire trunk to branch, not individual files thus keeping mergeinfo safe for the final reintegrate at the end.
EDIT:
#randomusername: I think (never looked too closely) at moving is that it falls into the 'partial merge' trap. One cool feature of SVN is that you can do a sparse checkout - only get a partial copy of a tree. When you merge a partial tree in, SVN cannot say that the entire thing was merged as it obviously wasn't, so it records the mergeinfo slightly differently. This doesn't help with reintegrate as the reintegrate has to merge everything back to the trunk, and now it finds that some bits were modified without being merged, so it complains. A move appears kind of the same thing - a piece of the branched tree now appears differently in the mergeinfo than it expects. I would not bother with reintegrate, and stick with the normal revision range merge. Its a nice idea, but it trying to be too many things to too many users in too many different circumstances.
The full story for mergeinfo is here.
I suspect you're not following the merge instructions correctly:
"Now, use svn merge with the --reintegrate option to replicate your branch changes back into the trunk. You'll need a working copy of /trunk. You can get one by doing an svn checkout, dredging up an old trunk working copy from somewhere on your disk, or using svn switch (see the section called “Traversing Branches”). Your trunk working copy cannot have any local edits or contain a mixture of revisions (see the section called “Mixed-revision working copies”). While these are typically best practices for merging anyway, they are required when using the --reintegrate option.
Once you have a clean working copy of the trunk, you're ready to merge your branch back into it:"
I have few problems with merging.
I am getting this error when trying to merge TFS2008. There are no pending changes on either source or destination branches.
TF14083: The item {0} has a pending merge from the current merge operation, please resolve and check in the current merge and merge again to pick up this change.
There is a "Resolve Conflicts(x)" link at the top of the pending changes window that I missed.
Did you read this article?
One of the suggestions there is to try the operation in a new workspace.
Also, if you have renamed or deleted one or more branches/folders, there might be changes in your workspace you're not aware of. Is there anything (even outside the source and target) in your Pending Changes window?
Here's a work-around worked for me.
Short version: Merge all files that don't report TF14083 first and check in changes, then perform a remerge.
Long version:
We had no files in shelves or not checked in, but when trying to perform a merge from one branch to another I got the error message TF14083: The item '' has a pending merge from the current merge operation, please resolve and check in the current merge and merge again to pick up this change.
My workaround was to merge all other files except those reported with a TF14083 error. Check in that merge, then perform a new merge from and to the same branches as previously, and now TFS picked up the changes in those files reported with TF14083 in the previous merge operation and merged them with no warnings or errors.
Go figure!