I have a server written on C++ REST SDK.
There's http_listener which listens to "http://localhost:34568".
When I try to send a request in browser or from the client to localhost it works fine and I get the responses from my server. But the point is to use the application in network. And here where the problem comes.
When I try to request the server from the other PC using IP(192.168.1.103:34568) I get "HTTP Error 400. The request hostname is invalid."
I'm aware that that could be some firewall issues but it's turned off. Also I tried to set port rules in brandmauer and it didn't help.
And even more! I got XAMPP running Apache server and when I do the same thing but with (192.168.1.103:80) I do get the response from Apache and have an access.
Anybody had something similar or somebody knows what the problem is about?
Listen to local ip address or to your network name (dns):
"http://xxx.xxx.xxx.xxx:34568" or
"http://your_network_name:34568"
So, if you have multiple network adapters, you can choose which one.
Related
Hi i am using openfire as my im server to my mobile app client, I have added the Httpfileupload plugin to openfire and enabled the http bind settings, when I try to upload a file it shows me this error Failed to connect to localhost/127.0.0.1:7443 ,
and the servers send me this XML message <get url="https://localhost:7443/httpfileupload/45726202-5e69-4b5c-a533-00d82f6d1121/4add76e7f15b6b4f.png"/>
I’ve tried to access this uri but it doesn’t work
please help me with this issues
i am using the latest smack version and the latest openfire version also
You appear to have set up Openfire using the value 'localhost' as its XMPP domain and/or fully qualified domain name for the server that is running Openfire. This is a recipe for disaster. Openfire is broadcasting the address of the content that is managed by its HTTP File Upload plugin, and uses the value that was configured, 'localhost'. Clients, which typically run on different machines, will try to connect to this host. As they're instructed to connect to 'localhost', they'll never be able to reach Openfire.
My advise is to setup Openfire again, and use proper, network-reachable addresses for values of the XMPP domain name and FQDN (these are asked for in the second page of the setup wizard, if memory serves).
I am trying to connect to ejabberd server using smack API 4.1.2 (no asmack) on android device. while running smackClient program , I am getting below error
java.net.SocketTimeOutException:Failed to connect to abc.example.com/182.*.*.* (on port 5222) after 30000ms,'abc.example.com:5222' failed because java.net.ConnectionException: Failed to connect to abc.example.com/182.*.*.* (on port 5222) after 30000ms
Connection to same ejabberd server using same android device is working fine using xmpp clients like xabber. so Issue is surely with client code I have written. Below is the snippet of my code
XMPPTCPConnectionConfiguration config = XMPPTCPConnectionConfiguration.builder()
.setUsernameAndPassword(userName, password)
.setServiceName("abc.example.com")
.setSecurityMode(ConnectionConfiguration.SecurityMode.disabled)
.setSendPresence(true)
.build();
connection = new XMPPTCPConnection(config);
connection.connect();
connection.login(userName, password);
I am missing something in my client code that xabber is having so xabber connection is working from same device using same credential.
Please help
Hard to tell without real IP and names in your example. However, my best guess would be about how the address to your IP server is resolved.
There seems to be discrepancy in your example with server (example.com) and service name in your code (abc.example.com).
My guess it that your client is attempting to connect to another machine that the one the XMPP server is running on.
So, here are the things to check when you have issues with a server not replying:
Check how the address of the domain is resolved. You may need to specify another machine name that the domain. If this is a test domain, there is possibly not a DNS setup, so you may even need to specify server IP (while still configuring the client to use an XMPP domain, that's two different things).
In client, log the IP you are trying to connect to, to make sure this is the one where the server is running.
If server is not on the main domain server, you may even need to do DNS SRV record queries for XMPP C2S service.
For me , it took hours to find the solution.
I forget to turnoff the VPN application(Express VPN) .Network tunneling was the root cause .
And change the Network protocol version properties as below ,
Choose the 1st option (Obtain DNS server address automatically).
My experience: I used following code
DomainBareJid xmppServiceDomain = JidCreate.domainBareFrom("desktop-urvfr83");
//DomainBareJid xmppServiceDomain = JidCreate.domainBareFrom("192.168.1.3");
InetAddress addr = InetAddress.getByName("192.168.1.3");
XMPPTCPConnectionConfiguration config = XMPPTCPConnectionConfiguration.builder()
.setUsernameAndPassword("alir", "111111")
.setHostAddress(addr)
.setResource("phonn")
.setXmppDomain(xmppServiceDomain)
.setSecurityMode(ConnectionConfiguration.SecurityMode.disabled)
.setPort(5222)
.build();
but it could not connect and produced timeout connection exception. When I disabled windows firewall it worked correctly and connected.
I have installed the Mobicents Presence server following the guide.
The server is installed but now I am not able to proceed further. I mean now how to test the presence or register the devices with XDM, PS and RLS. How do I find on which port the services are running?
I am able to see register messages received to the server but on the softphones request timeouts.
Is there any documentation which I am missing?
Please help.
The Mobicents SIP Presence Server is not supported anymore.
There is an issue on GitHub currently in development about presence. Take a look at: https://github.com/Mobicents/RestComm/issues/380
I am writing an application with C++ to connect to my server.
I am using gethostbyname(). It is working fine when I give host name as 'localhost'. but if i try any other site like google.com, it fails.
Can anyone please tell me what could be going wrong.
I can access those websites through browser. Note: I have proxy set up in my browser.
Is thr proxy causing issue with gethostbyname()? if yes, how can I mention proxy in my C++ code?
Based on what you describe in your question, it appears that your machine is on a corporate network that is firewalled off the Internet, all access to the web is via a web proxy, and that your network does not have Internet DNS resolution.
Even if you managed to succeed in resolving an IP address, you will not be able to make an outbound connection, unless your firewall offers a Socks proxy, or an equivalent.
If your intent is to write a client that accesses web sites via HTTP, you will need to use your corporate HTTP proxy to do that. Contact your system administrator for more information.
I have a Gwan server set up at home on my Arch Linux box. I'm running "motion". I have a router that, of course, handles my external IP address.
I want to access the avi movie shorts generated by motion through port 1000 which is port forwarded through my router to the box on my internal network. I've written an event_end script that copies these motion videos to my Gwan "Document Root". I've set the particular directory up according to the Gwan docs and can see these videos using the external ip address:1000 just fine when I'm at home. But when I click on the very same link from the machine at my office, I get this error message in Firefox: "Firefox can't establish a connection to the server at 99.99.99.99:1000.".
So I don't understand why I can see that link when I'm at home but not from anyplace else. What setting have I missed?
Thanks.
Are you sure that your firewall at work allows traffic on port :1000 at all?
port 1000 which is port forwarded through my router to the box on my internal network [at home]... but I get an error "Firefox can't establish a connection to the server at 99.99.99.99:1000" [from my office].
As Pete noticed, this sounds like a routing error.
As the HTTP client, Firefox, cannot even establish a connection, the problem happens before G-WAN can do anything.
while I was using quickserve, I could view those videos just fine while using port:1000
...probably from your private network at home, and not from your office.
If quickserve was available from your office then, since then, you have messed with the router port mapping OR with the G-WAN listener (hence the connection failure).
Unfortunately, since G-WAN won't receive anything until you get this right, its log files won't help.
And as you do not provide any information about your port mapping and G-WAN listener, we can't help you to spot obvious errors.
Note that this issue is a system configuration problem and has little to do with the G-WAN application server itself (remember that Stackoverflow is a Q&A site for developers). The Serverfault site might be a better place to discuss your problem.