vagrant up failed
here is my "Vagrantfile"
#-*- mode: ruby -*-
# vi: set ft=ruby :
VAGRANTFILE_API_VERSION="2"
Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|
config.vm.box = "centos41build"
config.vm.provider :virtualbox do |vb|
vb.customize ["modifyvm", :id, "--cpus", "1", "--memory", "1024"]
vb.gui = false
end
config.vm.define :centostest41 do |centostest41|
centostest41.vm.network "private_network", ip: "192.168.10.10"
centostest41.vm.hostname = "centosfivefour"
## ssh
centostest41.vm.network :forwarded_port, guest: 22, host: 2105
end
end
that is fail messages
$ vagrant up
Bringing machine 'centostest41' up with 'virtualbox' provider...
==> centostest41: Clearing any previously set forwarded ports...
==> centostest41: Fixed port collision for 22 => 2222. Now on port 2203.
==> centostest41: Clearing any previously set network interfaces...
==> centostest41: Preparing network interfaces based on configuration...
centostest41: Adapter 1: nat
centostest41: Adapter 2: hostonly
==> centostest41: Forwarding ports...
centostest41: 22 => 2105 (adapter 1)
centostest41: 22 => 2203 (adapter 1)
==> centostest41: Running 'pre-boot' VM customizations...
==> centostest41: Booting VM...
==> centostest41: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.
The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.
this box made in myself by centos4.1i386 virtualbox
how to solve this problem?
i was search this issue. but i can't solve.... gui config -> false solution is failed
this error get when i give to vagrant debug option
INFO interface: error: The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run vagrant up while the
VirtualBox GUI is open.
The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run vagrant up while the
VirtualBox GUI is open.
The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.
INFO interface: Machine: error-exit ["Vagrant::Errors::VMBootBadState", "The guest machine entered an invalid state while waiting for it\nto boot. Valid states are 'starting, running'. The machine is in the\n'poweroff' state. Please verify everything is configured\nproperly and try again.\n\nIf the provider you're using has a GUI that comes with it,\nit is often helpful to open that and watch the machine, since the\nGUI often has more helpful error messages than Vagrant can retrieve.\nFor example, if you're using VirtualBox, run vagrant up while the\nVirtualBox GUI is open.\n\nThe primary issue for this error is that the provider you're using\nis not properly configured. This is very rarely a Vagrant issue."]
Related
I've got problem with completing pgadmin4 installation thru sudo /usr/pgadmin4/bin/setup-web.sh command.
During this process instalator does not recognizing that Apache is running and asks me if I want to start it:
The Apache web server is not running. We can enable and start the web server for you to finish pgAdmin 4 installation. Continue (y/n)? y
Then it just spits some errors:
Too few arguments.
Error enabling . Please check the systemd logs
Too few arguments.
Error starting . Please check the systemd logs
So far I havn't found where the logs are stored.
About my apache, I am quite sure that my server is running, because I can connect to it through browser, phpmyadmin is working properly, and service apache2 status returns * apache2 is running. By my understanding apache2 is just fancy word for httpd service, and there is no other service called simply apache.
PostgreSQL seems to work properly from command line, haven't tested if I can connect to it yet, but this shouldn't be the case right?
I am using
**PostgreSQL:** 12.5 (Ubuntu 12.5-0ubuntu0.20.04.1)
**Ubuntu:** Ubuntu 20.04 LTS
**Server:** Apache/2.4.41 (Ubuntu)
I had the same issue for Debian 10 and Ubuntu 20. The /usr/pgadmin4/bin/setup-web.sh script is using 'uname -a' which doesn't contain "Debian" identifier in the return string. Updating this to read /proc/version will allow APACHE to be specified as the Debian variant of apache2.
Change:
UNAME=$(uname -a)
To:
UNAME=$(cat /proc/version)
I had a similar problem with Ubuntu running inside WSL 2. Managed to resolve it by modifying the /usr/pgadmin4/bin/setup-web.sh script. I moved these lines outside of the conditional:
IS_DEBIAN=1
APACHE=apache2
This allowed the installation to progress beyond the Too few arguments. error. There was still an error however:
System has not been booted with systemd as init system (PID 1). Can't operate.
Error restarting apache2. Please check the systemd logs
I resolved this by running:
sudo service apache2 restart
After this I tried bringing up the admin page by visiting http://127.0.0.1/pgadmin4 from the Windows host. This still didn't work, and had to connect using the Ubuntu machine's ip address (you can find it out via ifconfig) which finally allowed me to see the login page.
I am trying to install Kubernetes on windows server 2016.
I tried to install minikube, and got some errors.
This is the tutorial that I followed:
https://www.assistanz.com/installing-minikube-on-windows-2016-server/
This is the command + error that I got:
PS C:\Windows\system32> minikube start –vm-driver=hyperv –hyperv-virtual-switch=Minikube
Starting local Kubernetes v1.10.0 cluster...
Starting VM... Downloading Minikube ISO
170.78 MB / 170.78 MB [============================================] 100.00% 0s
E1106 19:29:10.616564 11852 start.go:168] Error starting host: Error creating host: Error executing step: Running precreate checks.
: VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path.
Retrying.
E1106 19:29:10.689675 11852 start.go:174] Error starting host: Error creating host: Error executing step: Running precreate checks.
: VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path
================================================================================
An error has occurred. Would you like to opt in to sending anonymized crash
information to minikube to help prevent future errors?
To opt out of these messages, run the command:
minikube config set WantReportErrorPrompt false
================================================================================
Please enter your response [Y/n]:
Someone knows how to solve it?
I googled it, but no luck.
Thanks!
I was never able to get the config parameters to work with minikube start.
I was able to get past this error using the minikube config commands in PowerShell (should also work at a command prompt):
minikube config set vm-driver hyperv
minikube config set hyperv-virtual-switch ExternalSwitch
minikube config view
minikube delete
minikube start
For more information on the command run: minikube config -h
Looking at the documentation you have provided, I have noticed that the screenshot shows a slight difference to the one they've quote.
I have also found this command in another piece of documentation from kubernetes here, showing the same command as that from the screenshot.
I suggest you try the following command;
minikube start --vm-driver=hyperv --hyperv-virtual-switch=Minikube
It is true that OP has pasted the incorrect command, because there is - instead of --. I tried to pass this arguments to minikube and all you get is an instant error. So the issue must be somewhere else. I remember having similar issue and it got resolved after deleting the .kube and .minikube folders and trying to run it again.
After taking a closer look this tutorial is destined for installation of minikube inside of a Windows Server 2016 Virtual Machine, so you have to have a Nested Virtualization able hardware:
Prerequisites The Hyper-V host and guest must both be Windows Server
2016/Windows 10 Anniversary Update or later. VM configuration version
8.0 or greater. An Intel processor with VT-x and EPT technology -- nesting is currently Intel-only. There are some differences with
virtual networking for second-level virtual machines. See "Nested
Virtual Machine Networking".
So the main question is, is that true in your scenario? Are you trying to perform your steps on Windows Server Hyper-V virtual machine with nested virtualization feature?
If you confirm that I have technical possibilities to check it in that scenario.
Otherwise I recommend using the "traditional way" of running minikube in Windows, according for example to this tutorial.
Problem: vagrant up fails with the error below. I am running vagrant on Windows 7 and the base box is Ubuntu )( files.vagrantup.com/precise32.box ).
how can it be fixed?
vagrant.bat up
Bringing machine 'default' up with 'virtualbox' provider...
[default] Clearing any previously set forwarded ports...
[default] Clearing any previously set network interfaces...
[default] Available bridged network interfaces:
1) Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
2) Intel(R) PRO/1000 PL Network Connection
Vagrant is attempting to interface with the UI in a way that requires
a TTY. Most actions in Vagrant that require a TTY have configuration
switches to disable this requirement. Please do that or run Vagrant
with TTY.
Process finished with exit code 1
thanks
This worked for me on cygwin:
Or add this to ~/.bashrc:
export VAGRANT_DETECTED_OS=cygwin
Then I got the "Vagrant displays a message that it needs to run some internal upgrades..."
Edit - Oops! Spoke to soon. During its updates, I got Warning: Authentication failure. Retrying... until timeout :P
Edit 2 - I was able to fix it by setting config.ssh.private_key_path to the .vagrant.d/insecure_private_key in my Windows user's home directory.
I had the same error while destroying a Vagrant Box. I simply added -f and it did the job.
vagrant destroy m001 -f
This is happening because when script attempts vagrant destroy, Vagrant asks for [Yes/No] confirmation. Adding -f skips that.
I got the same error after upgrading Vagrant from 1.4 to 1.6.3 (Windows 7).
Running VAGRANT_HOME\bin\vagrant.exe manually resolved this issue for me:
Execute VAGRANT_HOME\bin\vagrant.exe
Vagrant displays a message that it needs to run some internal upgrades
"Press any key to continue"...
Once the process finished (it took several minutes), I was able to proceed with Vagrant instance launch as usual.
This is caused by Vagrant finding multiple Ethernet interfaces that can be used as public network and Vagrant cannot decide which one to use.
There are 3 options:
Deactivate one of the 2 adapters, so that Vagrant can use the other
Specify the Ethernet adapter you would like Vagrant to use in the vagrantfile. Like this:
app.vm.network "public_network", bridge: "Intel(R) PRO/1000 PL Network Connection"
Running the vagrant executable manually as already described in Al Belsky's answer
If you are on Windows and are starting Vagrant through MinGW (Git Bash for example) and get this message, try running it once through Windows' default cmd.exe. You are then able to answer the question about your network adapters.
I'm using Vagrant 1.7.4
Execute the below code before running vagrant up:
export VAGRANT_DETECTED_OS=cygwin
That will eliminate the exiting of vagrant and will allow you to choose Network Interface.
This may also be caused by not having Hardware Virtualization enabled in BIOS.
Also encountered this with Windows 10, when Vagrant cannot properly detect OS.
also can happen if you have both vmware and virtual box installed and you try to use MinGW.
When veewee is displaying the following message, Waiting for ssh login on 127.0.0.1 with user veewee to sshd on port => 7222 to work, timeout=10000 sec what exactly is it waiting on?
As far as I can tell there is a ssh server on port 7222 on the host that veewee has put up and it's waiting on that. This means that something in the guest is going to connect back to it. However, I can't figure out what that thing might be - and thus I can't debug further.
Further details
I'm trying to build a virtualbox image for vagrant with the CentOS-6.3-x86_64-minimal template. My steps:
bundle exec veewee vbox define 'ejs-centos6.3-1' 'CentOS-6.3-x86_64-minimal'
wget http://mirror.symnds.com/distributions/CentOS-vault/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso
bundle exec veewee vbox build 'ejs-centos6.3-1'
The CentOS install appeared to run without error but it's stuck waiting for the ssh login.
You're right, there's a Ssh server on listening on port 7222, but it's on the guest (VM), not the host.
The host (Veewee) is waiting to connect to it. This SSH service is supposed to become available when the VM install process finishes, that's one of the steps used by Veewee to assume that the setup went fine and that the VM is ready.
If Veewee blocks and never gets this SSH connection, I think there could be multiple reasons:
VM setup went wrong and something prevents it from finishing successfully. Check Veewee output and the Virtualbox VM graphical console that should have opened when launching vewee box build.
There's something preventing your host computer to connect to the VM at the network level.
The VM image doesn't have Sshd installed, and/or the veewee box configuration files (in veewee/definitions/ejs-centos6.3-1/) miss instructions to install the ssh package
You should try to login to the VM using Virtuabox console window and check if there's an ssh package installed (rpm -qa | grep openssh-server) and a process named sshd running.
I've run Veewee against Centos 7 built with GUI on and it stuck on anaconda asking for source of packages. I've checked the ks.cfg and it was pointing to dead resource (404). After pointing to valid url it went through.
UPDATE (5 Feb, 2014) : This error comes up when machine is restarted without proper shutdown
I am trying to install EdX's open source Learning Management System, through their development vagrant box on a remote machine. However, I get an error related to virtual machine GUI. Is there anything that can be done via CLI/ssh ?
This is the exact error.
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.
Below are the contents of VagrantFile
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure("2") do |config|
config.vm.box = "precise32"
config.vm.box_url = "http://files.vagrantup.com/precise32.box"
config.vm.network :forwarded_port, guest: 8000, host: 9000
config.vm.network :forwarded_port, guest: 8001, host: 9001
# Create a private network, which allows host-only access to the machine
# using a specific IP.
config.vm.network :private_network, ip: "192.168.20.40"
nfs_setting = RUBY_PLATFORM =~ /darwin/ || RUBY_PLATFORM =~ /linux/
config.vm.synced_folder ".", "/opt/edx/edx-platform", id: "vagrant-root", :nfs => nfs_setting
# Make it so that network access from the vagrant guest is able to
# use SSH private keys that are present on the host without copying
# them into the VM.
config.ssh.forward_agent = true
config.vm.provider :virtualbox do |vb|
# Use VBoxManage to customize the VM. For example to change memory:
vb.customize ["modifyvm", :id, "--memory", "2048"]
# This setting makes it so that network access from inside the vagrant guest
# is able to resolve DNS using the hosts VPN connection.
vb.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
end
config.vm.provision :shell, :path => "scripts/install-acceptance-req.sh"
config.vm.provision :shell, :path => "scripts/vagrant-provisioning.sh"
end
No, there's not much you can do/diagnose using CLI or Ssh at this stage, because the VM fails to initialize properly and is not in a "working" state.
You should follow the advice contained in the error message.
Destroy your current VM:
vagrant destroy
then open VirtualBox GUI, and restart the Vagrant setup with :
vagrant up
You can then watch in the VM Console/Window (from Virtualbox GUI) what fails and prevents the setup from running.
An alternative way to start the VM with a console GUI would be to modify your Vagrantfile:
# You will find this line in the Vagrantfile
Vagrant.configure("2") do |config|
#Add this directive
config.vm.provider "virtualbox" do |v|
v.gui = true
end
end
(destroy your existing and failing VM with vagrant destroyand then run vagrant up)
If the remote machine (where VirtualBox runs) is a Unix box accessed using SSH, you may be able to export the GUI to your local machine using the -Xoption when SSHing to it. See this answer for more details about ssh -X
This message occured with my environment because 2 things:
1 - If your VirtualBox Software GUI have is closed, just open it.
Ps.: Try vagrant destroy then vagrant up again
2 - If the problem persist, just update your VirtualBox GUI.
VirtualBox Downloads
Let me know if it's done.