When veewee is displaying the following message, Waiting for ssh login on 127.0.0.1 with user veewee to sshd on port => 7222 to work, timeout=10000 sec what exactly is it waiting on?
As far as I can tell there is a ssh server on port 7222 on the host that veewee has put up and it's waiting on that. This means that something in the guest is going to connect back to it. However, I can't figure out what that thing might be - and thus I can't debug further.
Further details
I'm trying to build a virtualbox image for vagrant with the CentOS-6.3-x86_64-minimal template. My steps:
bundle exec veewee vbox define 'ejs-centos6.3-1' 'CentOS-6.3-x86_64-minimal'
wget http://mirror.symnds.com/distributions/CentOS-vault/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso
bundle exec veewee vbox build 'ejs-centos6.3-1'
The CentOS install appeared to run without error but it's stuck waiting for the ssh login.
You're right, there's a Ssh server on listening on port 7222, but it's on the guest (VM), not the host.
The host (Veewee) is waiting to connect to it. This SSH service is supposed to become available when the VM install process finishes, that's one of the steps used by Veewee to assume that the setup went fine and that the VM is ready.
If Veewee blocks and never gets this SSH connection, I think there could be multiple reasons:
VM setup went wrong and something prevents it from finishing successfully. Check Veewee output and the Virtualbox VM graphical console that should have opened when launching vewee box build.
There's something preventing your host computer to connect to the VM at the network level.
The VM image doesn't have Sshd installed, and/or the veewee box configuration files (in veewee/definitions/ejs-centos6.3-1/) miss instructions to install the ssh package
You should try to login to the VM using Virtuabox console window and check if there's an ssh package installed (rpm -qa | grep openssh-server) and a process named sshd running.
I've run Veewee against Centos 7 built with GUI on and it stuck on anaconda asking for source of packages. I've checked the ks.cfg and it was pointing to dead resource (404). After pointing to valid url it went through.
Related
I am running Centos 7 x86-64. I installed a guest (again Centos 7) through kickstart as an exercise. I prepared my kickstart file, I validated it and I launched with virt-install.
If something went wrong with the network configuration (During install I got no problem, I created a local repo on Host FTP server as source for the install) how can I connect to the machine?
Only SSH or virsh foresee some other connection method?
How can I find my machine running network configuration from outside?
I am running a barebone Centos7 installation so only command line, no graphical interface at all.
Thanks,
M.
You can ssh to your physical host from another one having graphical interface with X forwarding enabled (ssh -X machinename), and look at the the VM with virt-manager
You will need X running on the machine you're connecting from. For Mac OS it's XQuartz
I have a docker daemon/engine running inside guest (Ubuntu) virtual machine
and as per Docker Tooling for Eclipse instruction I had downloaded and setup the plugin in Eclipse Mars on my host Mac OS machine.
How do I connect to Docker running in guest VM from the host machine IDE.
As per instructions, I would need to enter TCP and authentication so how do I get these details to setup the connection?
I had tried with guest OS IP (i.e. tcp://127.0.0.1:2376 output of ifconfig command with local host IP) but was not able to connect.
Here are the steps I used to get Docker Tooling working in Eclipse Neon on Windows.
Open the Docker Quickstart Terminal
Execute docker-machine ls
Copy the URL (e.g. tcp://192.168.99.100:2376)
Click the Add Connection button in the toolbar for Docker Explorer
Provide a Connection name:
Select TCP Connection
Paste the above URL into the URI: edit box
Change tcp to https in the edit box
Select Enable authentication
Set the path to C:\Users\username\.docker\machine\certs
Click on Test Connection to verify
There are two parts to this. First, enabling the TCP socket (which I'll answer). Then, setting TLS authentication on the socket (which I'll link to but won't cover). The first part should get you up.
You'll need to edit the DOCKER_OPTS settings in /etc/default/docker in the VM. Edit this file and set DOCKER_OPTS to something like:
DOCKER_OPTS="-H tcp://0.0.0.0:2376 -H unix://"
Then, restart Docker (sudo service docker restart). This should get you a TCP connection that you can put in your Eclipse settings as:
tcp://10.0.2.15:2376
The second part (which is optional at this point) would be setting up the CA and certificates per https://docs.docker.com/engine/articles/https/. But I'd actually recommend just installing Docker Machine and provisioning your VM that way as it will create the needed certificates for you. Then, if your machine was named dev, you just point the authentication dir to ~/.docker/machine/machines/dev.
If Docker Daemon is running(i.e docker desktop running) in window task bar , not inside the VM , just get the URI from its context menu setting. In eclipse docker tooling perspective , we can connect to running docker daemon only by providing the URI.
I am novice in java I have installed Tomcat and it runs fine in a browser but when I run in a eclipse its showing error like
Several ports (8005, 8282, 8009) required by Tomcat v7.0 Server at localhost are already in use. The server may already be running in another process, or a system process may be using the port. To start this server you will need to stop the other process or change the port number(s).
I would like to mention one thing I am not authorized to login with admin account I have tried lot to stop the already running stuff through command prompt and i followed this link Deployment error: Starting of tomcat fail
however I am getting the same error is there any way to solve this issue.
Thank You.
Some other process is using one or more of the ports needed by tomcat (8005, 8282, 8009). Probably an old instance of tomcat. Kill it, then try again.
You can run netstat -abn on windows or netstat -apn on Linux to figure out which process is listening to these ports.
I just installed CentOS 6.3 on a new computer and am unable to SSH to it from our computer running Fedora 16. They are both on the same network.
Some facts:
- I can ping it from the Fedora machine.
- I can SSH to the CentOS computer to itself on the CentOS computer.
- I have looked into hosts allow and deny, I have set selinux to be permissive, I tried with iptables disabled on the Fedora computer
I am fresh out of ideas...
Thanks
Do you have fail2ban running?
Do you have denyhosts running?
Do you have iptables allowing TCP 22?
Do you have a line in your sshd_config that refers to "AllowUsers"? (most dont but some do, and if yours does, you need your account listed on that line)
Can you run this command tail -f /var/log/secure on that machine at the same time while trying to login from the second machine and spot the issue? If not, paste the output from that log here for me to comment on.
A long shot, but you might try service sshd restart and try again to see if that helps. Go ahead and run tail /varlog/messages while restarting that daemon to see if you spot anything unusual while doing that. If you spot the issue great, if you dont, post the output here for me to comment on.
Last, do this cp /etc/ssh/sshd_config /etc/ssh/sshd_config.back and then take a good known working sshd_config from another machine and place it over the top of yours and then restart the daemon again & try again.
My money is on seeing something that helps us in /var/log/secure.
I want to remote debug the nodejs program in Eclipse. I start the node script with the debug option.
$node debug script.js
But I can't connect to the node in Eclispe. When I netstat the node's TCP port. I found that node only listen 127.0.0.1 in debug mode. So I can't connect it from different computer.
But I can't find any startup options that can change to listen to any address.
Anyone know to make it listen to any address to remote debug in other computer?
if anyone else stumble upon this: you can set the node debug to any address as you set the port
node --debug=169.168.1.2:5858 app.js
if that would be the ip of your remote machine or even better to every machine
node --debug=0.0.0.0:5858 app.js
but please be aware that the 2nd option should only be used if you are debugging in your own private network as you open it up for everyone
This is what I do in linux Debian:
install balancer
sudo apt-get install balance -y
then create a route in balancer to reroute your 5858 port to 5859
balance 5859 127.0.0.1:5858
start your app
node --debug app.js
now you can access it from everywhere on port 5859
I'm looking into V8 code that goes through deps/v8/src/debug-agent.* down to deps/v8/src/platform-posix.cpp (for linux) to POSIXSocket::Bind method and it can't seem to have any option about this (unless I'm missing something).
I bet you either hack it and recompile node or you'll need to build a small proxy beside your node process.
Here's a great tut on debugging nodejs from eclipse. Note at the bottom there is a script the author uses to forward localhost:5858 to the remote server's 127.0.0.1. You could also just use an SSH tunnel.
So, to summarize:
start your script with node --debug app.js
configure eclipse as if you were debugging locally
use the node_g script or configure an SSH tunnel
go on vacation now that your code is bug-free
to debug nodejs remotely over SSH session do:
1. install balance on Linux: https://balance.inlab.net/overview/
2. run the command: balance -df 8585 127.0.0.1:5858 > /tmp/balance.out 2>&1 &
3. ssh to your remote Linux box (tunnel will be created 8585 > 5858 > nodejs)
4. run your node script on server: node --debug-brk --nolazy ./myNodeApp.js
5. kick off debug session in WebStorm alt-d to port 8585
now you are remote debugging securely over SSH session