I need to carry out some very tedious command line ops on my mongodb. Has anyone tried setting the shell editing to vi?
Would be very useful if I can search my command history and change/replace.
You can set the EDITOR environment variable to point to vi/vim and MongoDB will use it when you issue the edit shell command, or you can use the same EDITOR variable in javascript to override the environment value. Hence you can add the setting to your .mongorc.js file to ensure it is set as you wish each time without manual intervention.
Example from the mongo shell:
> EDITOR='/usr/bin/vim'
/usr/bin/vim
> db
test
> edit db
Which fired up vim for me as follows (abbreviated output for brevity):
1 test
~
~
~
"/tmp/mongo_edit1449005704.js" [noeol] 1L, 4C
In terms of your command history, that is kept in the file ~/.dbshell (as long as you are using something newer than 2.2.0) and can be edited directly.
Something to note: you can use Ctrl-r to reverse search and edit on the command line (hit Ctrl-r again to go one match further back, Ctrl-s to go forward etc.), just like you can in modern BASH shells. For a full list of the keyboard shortcuts, have a look here.
Related
I'm new to the fish shell, and just trying to set my $EDITOR variable so that's it's persistent across sessions and reboots. Here's what I've tried so far:
Running set -gx EDITOR vim from the command line.
Running set -Ux EDITOR vim from the command line.
Running those commands, prefixed by set -e EDITOR to unset any previous value.
Adding the above commands to my ~/.config/fish/config.fish file (it complains set: Warning: universal scope selected, but a global variable “EDITOR” exists.)
Uninstalling oh-my-fish and removing all fish configs to start from scratch.
No matter what I do, the EDITOR variable always ends up being /usr/bin/nano whenever I open a new terminal, start a new session, or reboot. What's even more strange is that in ~/.config/fish/fishd.my-hostname, I see SET_EXPORT EDITOR vim, and nothing about nano. Is this some kind of fish default? If so, how can I set this correctly?
Edit: I'm running Fish 2.6.0 on Antergos Linux.
First, the fish config file is ~/.config/fish/config.fish. Editing the file you named won't have any effect. Second, fish does not have any default for, nor does it set, the EDITOR or VISUAL variables. So whatever is setting it to /usr/bin/nano is a customization unique to your system.
If you set -Ux EDITOR vim and do not set it in config.fish it should be set to vim even if it is already set when fish starts. Run that set command then do set -U | grep EDITOR and env | grep EDITOR to see that it is set as a universal variable and exported. Now type fish to start a sub-shell. Run the previous two commands and you should see that it is still set to the same value. Now type set -U EDITOR nano in the sub-shell followed by exit. In the earlier shell you should now see that EDITOR is set to nano.
Personally I don't like to use uvars for this since at the moment they are per-machine. I just do set -gX EDITOR (type -p vim) in my ~/.config/fish/config.fish. This ensures that if I start fish on a new machine on which I've installed my ~/.config/fish directory I get my expected defaults.
The other reason not to use a uvar in this way is that the resolution order is local scope, global scope, universal scope. Since environment vars imported when fish starts running are placed in the global scope they will shadow the uvar you defined. Do not export universal variables. It is unlikely to produce the desired results. Simply set -gx the var in your config.fish script.
P.S., When asking questions of this nature you should always include pertinent facts such as the OS you're using and the fish version.
I am writing my script interactively with IPython. This is what I currently do:
write a chunk of code,
run in ipython with "run -i file_name.py".
make changes and repeat 2 until I think it is OK .
comment out the entire previous chunk.
write new chunk of code that is based on the previous one.
go back to step 2.
......
Is there more efficient way? Can I start a script from a specific line while using all the variables in current namespace?
Use ipdb ("pip install ipdb" on the command line to install it).
Suppose you want to run script "foo.py" from line 18 to 23.
You'll want to start like this:
ipdb foo.py
Now, let's jump to line 18 (i.e., ignore all the lines before the 18th):
ipdb> j 18
Next, we set a breakpoint at line 23 (we don't want to go further):
ipdb> b 23
Finally, let's execute:
ipdb> c
Job done :)
I'd personally also use the ipython notebook, but you call also use you favorite text editor and always copy out the chunk of code you want to run and use the magic command %paste to run that chunk in the ipython shell. It will take care of indentation for you.
Use the magic of %edit stuff.py (first use) and %ed -p (after the first use) and it will invoke your $EDITOR from inside of ipython. Upon exiting from the editor ipython will run the script (unless you called %ed -x). That is by far the fastest way I found to work in CLI-ipython. The notebooks are nice, but I like having a real editor for code.
(Based on lev's answer)
From the interactive shell:
%run -i -d foo.py
should then enter the debugger, and proceed with:
j <line_number>
c
etc.
EDIT: unfortunately, this seems to sort of break ipython's magic %debug command.
An IPython Notebook allows you to interactively run scripts line by line. It comes with IPython, just run:
ipython notebook
from the terminal to launch it. Its a web interface to IPython, where you can save the notebooks to *.py files by clicking save as in the settings.
Here's some more info from this video.
For something fast as well as flexible use http://qtconsole.readthedocs.io/en/stable/
It is similar to the Jupyter notebook based on your browsers (as pointed out by #agonti and #magellan88, but presumably much faster. It also has emacs style keybindings.
I use ipdb, ipython, comupled with tmux and vim and get almost IDE like features and much faster.
I am using a vpn service from certain server. I was given with a root account, and when I connect with a root account, the command line looks like below.
root#xa9g82:/etc/#
Then I used useradd to add an account called 'temp'
When I connected to the server with temp, then the command line only has a single character.
$
The user information is not shown, neither the path. Also, note that, in root's command line I can use tab to automatically complete the filename, however 'temp's command line inserts tab space, when I press tab. It is very inconvenient.
I am using Ubuntu 10.04. How can I resolve this issue?
I usually edit ~/.bashrc. Being root, you might want to change the system-wide preferences, at /etc/bash.bashrc. Personally, I changed some lines in ~/.bashrc to look like:-
# If this is an xterm set the title to user#host:dir
case "$TERM" in
xterm*|rxvt*)
## PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u#\h: \w\a\]$PS1" # default
PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\h: \W\a\]$PS1" # How I like it
;;
*)
;;
esac
use prompt to set the prompt.... (man prompt...)
it depends on what shell you run each one has it's own tricks, but you can make it looks as you wish.
BASH
TCSH
It is likely that the default shell for root is set to /bin/sh, which does not provide many of the features that you may used to if you use a shell like bash. To check if this is the case, run the following command:
cat /etc/passwd | grep ^root
The last component of the line that this command outputs will be your shell (which, as stated previously, I'm guessing is /bin/sh). If this is not the shell you want (it probably isn't), then edit /etc/passwd (using nano or whatever editor you're most comfortable with) and change your shell to something more palatable, like /bin/bash. After doing this, you'll need to log out and then log back in.
In bash, executables such as mplayer and imagemagick's "convert" have a cool auto-complete functionality on their command line arguments. For instance, if I type
mplayer <tab><tab>
in one of my video folders, then mplayer will list all media files located in that folder, and only the media files.
Similarly, if I type
convert -<tab><tab>
then I will see all the possible options of the convert script, which is great.
My question is how to achieve a similar functionality, using bash, ruby or python scripts?
This is an example of BASH's smart completion. A basic description is here, a guide to writing your own extensions is here and another (Debian-based) guide is here. And here's a fuller featured introduction to the complete command (the command that facilitates this behaviour).
The link to writing your own extension in the accepted answer has gone dead. Quoting here from http://web.archive.org/web/20090409201619/http://ifacethoughts.net/2009/04/06/extending-bash-auto-completion/
Bash provides you a way of specifying your keywords, and using them to
auto complete command line arguments for your application. I use vim
as a wiki, task managemer and contacts. The vim helptags system lets
me index the content instead of searching through it, and the speed
shows it. One feature I wanted to add to this was to access these tags
from outside vim.
This can be done in a straight forward way:
$ vim -t tagname
This takes me directly to specific content marked using this tag. However, this will be more productive if I can provide
auto-completion for the tags.
I first defined a Bash function for the vim commandline. I added the
following code to my .bashrc file:
function get {
vim -t $1
} Now I can use get tagname command to get to the content.
Bash programmable completion is done by sourcing the
/etc/bash-completion script. The script lets us add our
auto-completion script /etc/bash-completion.d/ directory and executes
it whenever it is called. So I added a script file called get with the
following code in that directory.
_get()
{
local cur
COMPREPLY=()
#Variable to hold the current word
cur="${COMP_WORDS[COMP_CWORD]}"
#Build a list of our keywords for auto-completion using
#the tags file
local tags=$(for t in `cat /home/anadgouda/wiki/tags | \
awk '{print $1}'`; do echo ${t}; done)
#Generate possible matches and store them in the
#array variable COMPREPLY
COMPREPLY=($(compgen -W "${tags}" $cur))
}
#Assign the auto-completion function _get for our command get.
complete -F _get get Once the /etc/bash-completion is sourced, you will get auto-completion for the tags when you use the get command.
Along with my wiki I use it for all the documentation work and at
times the code too. I also use the tags file created from my code. The
indexing system lets me remember the context instead of the filenames
and directories.
You can tweak this system for any of the tools you use. All you need
to do is get a list of the keywords for your command and give it to
the Bash programmable completion system.
This functionality in bash is provided by bash-completion and similar functionality is included in zsh. If you want to add support for some program not currently supported by one of these tools, you need to write your own extensions for them.
How do I enable bash completion on Ubuntu?
sudo apt-get install bash-completion
source /etc/profile.d/bash_completion.sh
sudo apt i[TAB]
When working on a linx CShell u get the option to press the up / down arrows to select the last command/s typed or the Command Buffer. This even works on Windows.
However this is not functional when working on Solaris, to which i recently switched. I am guessing that the shell is also a CShell.
Please tell me what key combination is required to have this feature on Solaris ?
The default shell in Solaris has command history, but you can also use Bash instead, it's more user friendly. Just type 'bash' (no quotes) at the command line. You can also edit /etc/passwd to make bash your default shell.
The "official" default shell for Solaris is actually sh, the original Bourne shell (see Chapter 10 of the Advanced User Guide for Solaris for more info). If you'd like to change it to csh or tcsh—and you're not root (it's generally considered bad practice to use anything but sh as root's default)—just issue passwd -e /path/to/shell_of_your_choice <loginname>. I'm guessing this would probably look like passwd -e /bin/csh <loginname>, but you'd probably want to make sure it exists, first.
It may be that it's the Korn shell in which case try <ESC>k.
bash at least will allow you to switch modes with "set -o vi" or "set -o emacs".
Maybe you can use the !! command, to repeat the previous one.
Use "echo $SHELL" to see what your login shell is. If it's ksh or bash, try "set -o emacs". If that works, you'll be able to use ^P to go back a command. ^R lets you search for a command, ^F and ^B to move around within the command.
If you can´t change your default shell, or you just want to try out one that works, you can kick off any other shell from your command line. I recommend you tcsh, which will have good command line editing and history using the arrow keys. Type /bin/tcsh at your prompt to try it out. You can use the earlier responses to change your default shell if you like tcsh. Make sure your have the following in your $HOME/.cshrc file:
set filec
set history=1000 # or some other large number
set autologout=0 # if you are logging in remotely under your account.
I hope this helps.
You enable history temporarily if you use BASH by typing
HISTSIZE=1000
which will enable up and down keys and store 1000 commands. After termal disconnetion all history will be gone.
This works on solaris 10.
For permanent solution add these lines to ~/.bashrc
HISTSIZE=1000
HISTFILESIZE=1000