Thank you for taking the time to read my question. I am quite new to server side development, but do have some experience with Swift.
I opened Examples.xcworkspace.
So my issue is that I am trying to run Tap Tracker, and
1) when I run it I get this in the output terminal (I think the route of the issue must lie here):
2) when I go to the URL, it returns the data from the URL Routing example only
3) when I press the button on the iOS app, it returns the following:
I'm trying to get TapTracker to work on its own, I know that if I open the project on its own and then add PerfectServer and PerfectLib to the project it works, but how do I just run TapTracker if I'm opening it in Examples.xcworkspace?
I'm not sure how you started the program. But I can tell you how I run it successfully.
To execute Tap Tracker only, select Tap Tracker button on the upper left corner of Xcode.
Select Product -> Run
Then you'll see Tap Tracker running on your device.
Tap Tracker needs a corresponding server(Tap Tracker Server) so that it can work.
You can start Tap Tracker Server using the same way as you start Tap Tracker.
Related
I'm having an issue with devtools.
I just did a clean install of Laravel followed by new backpack install. During the install when I was prompted to install paid add-ons, I went to the backpack site and purchased "backpack pro" and "devtools". Went back to installer and installed both add-ons. Everything worked as expected with no errors.
Then went to http://project.test/admin. Registered an admin account. Logged in. Then went to http://project.test/admin/devtools. App/Models/User is shown on the models screen so I clicked the generate CRUD button. It seemed like it was doing something, but I didn't see anything change.
Now on the Models screen, the "Generate button" under actions is disabled and the disabled class is present on the button in the inspector. The CRUDs link in the top navbar links to nothing (a href="#").
So now I click the "Generate All CRUDs button". It pops up the green notification which displays "CRUD generated for: " nothing, it doesn't show a CRUD name.
When I click the "See files" button on the model, it shows a list of all the files it created except the Route link and the Menu link are disabled.
I'm not sure if missing something - what do I do now?
NEW INFO
I finally found an error. Creating a new model with migration works. However, when trying to generate a CRUD for any model, I get this error:
str_repeat(): Argument #2 ($times) must be greater than or equal to 0
It's happening in the middleware:
App\Http\Middleware\CheckIfAdmin
in the handle function on line 66. Line 66 is: return $next($request);
I've just create a new Laravel app and followed the steps to add the PRO and Devtools repo.
I did the same as you did, opened the "Models" and saw only User. I made sure I deleted the user migration before as you said that Models without migration wouldn't work.
I clicked Generate CRUD, and got the green notifications.
This is what I get when I click on See Files
https://prnt.sc/t7kbQme68yVM
Route and Menu are disabled because it's a feature we are still working on, nothing that impacts the application.
If your issue persist please open a issue report on https://github.com/Laravel-Backpack/devtools-issues
UPDATE: We found a situation where that str_repeat could trigger, we are working on it and will patch it ASAP. I will let you know here when we do it
UPDATE 2: It was fixed. Thanks for the report!
Cheers
I'm using the following plugin
https://pub.dev/packages/receive_sharing_intent
It is working with android.
But the instruction for IOS are unclear - I follow the IOS instruction and I'm able to share files with my app, when I do so, my app opens but the flutter code is not executed, the only thing I see in the log is:
6.26.0 - [Firebase/Analytics][I-ACS023000] Deep Link Web URL query is empty
Which doesn't mean any thing to me.
I tried to look for this error and couldn't find anything that is related to sharing intent.
Can someone clarify this?
Is there a tutorial on how to set sharing intent for IOS?
In the instruction it says:
ios/Runner/Runner.entitlements
....
<!--TODO: Add this tag, if you want support opening urls into your app-->
<key>com.apple.developer.associated-domains</key>
<array>
<string>applinks:example.com</string>
</array>
But I don't have such file in my directory structure, any idea how to set it correctly?
....
EDIT:
I created and added the file ios/Runner/Runner.entitlements manually
I noticed I missed the last step (after publishing the question), so I did it:
Add Runner and Share Extension in the same group
Go to the Capabilities tab and switch on the App Groups switch for both targets. Add a new group and name it group.YOUR_HOST_APP_BUNDLE_IDENTIFIER in my case group.com.kasem.sharing
This step is not very clear:
the name of the tab is Signing & Capabilities
in order to switch on the App Group you should click on `+ Capability' in the top left of the tab
I checked the checkbox next to App Group
Add a new group and name it group.YOUR_HOST_APP_BUNDLE_IDENTIFIER in my case group.com.kasem.sharing
After this I was able to receive the file intent in the App but couldn't open the file:
print("$path, exist ${await io.File(path).exists()}");
I was able to print the path but the exists method return false
NOTE:
works with no issues in android
works with no issues in IOS when sharing an image
only fails with files (PDF)
I deployed the production release for my first Google Action. But even 2 weeks after the approved deployment I can find my action neither in the Google Assistant store nor directly via voice activation.
The test versions ran fine and was found every single time. So the invocation name should not be the problem. When I use the generated action link from the console I find the action in the store and can send it to my Smartphone, where I can start it with the sent link. But after closing the app I cannot open it again via voice.
I used two different google accounts on different devices (all are set up in the right language: german), but no chance.
Is this a mistake on Googles side or do I miss anything? In this state I have to open the action every time over the action link which is useless for a voice app :)
Here is the link to my action: https://assistant.google.com/services/invoke/uid/000000c77f740137?hl=de
The invocation would be for example: "Mit Erfolgs-Fans sprechen" (like said, on the test this name was found every single time)
This happened to me too. Though it wasn't in production when I faced it. I was also not able to see the action in Assistant-enabled devices (Google home app/assistant).
It is probably not the invocation name issue, it is just that the action is not being made visible across all the platforms. Some of the solutions I tried were-
Clean cache of the device
Create a new action with everything just the same as in your current actions. It worked once for me!
Go to GCP and under your project, try to understand if there is any pending activity.
Once I created so many actions because I wasn't able to see it that after around 30 days all those actions started to become visible. So, if you can wait that is fine.
In the end, do contact their support with all the relevant information. I hope they should be able to help.
Thank you!
I am starting from the position of near absolute ignorance here.
I successfully set up a Bluemix account, added devices, got API keys, connected my Raspberry Pi running Node Red and a temperature sensor to Node Red on Bluemix, created a dashboard and was able to get data back and forth between Watson/Bluemix and my Pi. Cool. Unfortunately, I got all that way without ever really understanding the navigation of Watson/Bluemix nor all the terminology. I made NR work both ways and was happy.
Then one day last week, the route to my Bluemix Node Red application stopped being accessible:
404 Not Found: Requested route ('misterpi-01.mybluemix.net') does not exist.
I can browse my devices and see that they are sending data every few minutes, so clearly the connection is there. When I click on IBM Cloud Apps, I am told
There are no IBM Cloud applications bound to your organization
When I am on my IBM Cloud Dashboard and I click on Connections I see I have a connected application that is "Not Running" with a red dot. I can click Stop and the status goes to Stopped. When I click Start, after a short while,
I cannot add an another app because I can only have one.
Where did my NR app go and can I get it back (preferred) and if not, delete it?
At the suggestion of #hardillb I went looking for logs. I found them and it looks like the app is continuously started and crashing. I can't copy the text from the error logs but here is a screenshot.
The first thing you should do is get a copy of your flow source for backup. Go into the IBM Cloud Dashboard and click on Cloudant-ll (the suffix may be different?) and then Launch Cloudant Dashboard (alternatively, click on ...-cloudantNoSQLDB and then alias of Cloudant-ll). From there click on NodeRed and then select the id that ends with "/flow". Then you can extract everything inside "flow": [].
I would recommend emptying it out so you have no flows to ensure that Bluemix can start 'empty'. If you do this you will end up with something similar to mine below (don't change _rev).
{
"_id": "Home Assistant/flow",
"_rev": "102-2b38e1756eeb26def19b20858bc50a40",
"flow": []
}
Later you can paste the extracted code back into Node Red using Import > Clipboard.
You may also want to edit the ".../settings" document to remove any extra node types you installed.
Caveat - I had the same problems with Bluemix and eventually gave up - crashing at least weekly running out of memory and difficulty restarting. I suspect it can't reliably run with 256MB.
I had similar issues with log/errors and endpoint 404:
I followed Michaels advice to backup (nodered:flows and settings) in cloudant.
1. However what works(for now) was cleaning part of the nodered /settings.
2. Basically I removed the nodes part from the Json up until almost the end, leave _credentialSecret part at the end.
3. restart and go to your url, you will see your flows
4. if your flows use some nodes that produce warnings, it might be necessary to remove them to avoid future problems.
UPDATE 2: I saved every flow separately, and then deleted them all from the nodered flows. Then restarted, and have been importing one by one, and it is working.
I am beginner in using Visual FoxPro. I am trying to create a simple application which contains a form with a few textboxes. The problem is that the application window does not appear when I run the executable file which I build.
The code for the program is:
PROCEDURE main_app
_SCREEN.Activate
_SCREEN.WindowState = 2
_SCREEN.backcolor = RGB(128, 128, ;
128)
_SCREEN.Caption = ""
_SCREEN.refresh()
SET TALK OFF
SET DELETED ON
SET EXCLUSIVE OFF
CLEAR ALL
CLEAR
CLOSE ALL
DO FORM simpleform LINKED
READ EVENTS
RETURN
*MESSAGEBOX('Msg')
ENDPROC
In the form I have a few textboxes and a button. When the button is clicked then some code is executed. If I run the application from the IDE everything works fine but if I create the executable this does not display any window, still the process appears in the task manager. If I uncomment the MessageBox then this will appear even if I run the exe file. I don't know a way to trace the problem outside the IDE, maybe there is still a library needed that I am not aware.
I am using Visual FoxPro 9.0
Would someone be able to help me out?
If you can provide me with a link to a very simple application exe which uses just one form and finishes when the form is closed I would very much appreciate it.
Thanks in advance
I tried creating a brand new project, new code and new form just as you described. I copied your code and ran, but it never displayed the form.
If this is the main app in your project, you don't need the initial
PROCEDURE main_app
just remove this line as there is nothing CALLING the "Main_App" and thus is never getting called to ultimately call your form.
Just comment it out, save your project and run it... See what you get, it SHOULD work.
** PROCEDURE main_app
The problem was that I did not set the screen visibility to true.