I made a script accessing an API which requires authentication. The this is working if I enter the credentials (email+pw) into the prompt:
$cred = Get-Credential
$web = Invoke-WebRequest -Uri $srcURI -Credential $cred
But this does not allow me to automate this setup, as a prompt is always coming up asking for Username/PW.
I tried several different ways, but none seems to be working:
For me the most logical was:
$username="user"
$password="password1"
$PScredOBJ = New-Object -TypeName System.Management.Automation.PSCredential($username,$password)
$cred2 = Get-Credential -Credential $PScredOBJ
Result: Still an empty prompt showing up.
Anybody knows how to handle this?
Thx
This has been covered in a lot of places, a google search would give an answer. Here's the first one I found using "automate ps credential" as my search terms. To reiterate:
$password = "password" | ConvertTo-SecureString -AsPlainText -Force
$credential = New-Object System.Management.Automation.PSCredential "username",$password
Related
I want to execute a .exe File with the Start-Process Command while using specific credentials.
However I cant get it to work for me:
$username = "<Domain\Username>"
$password = "<Password>"
$secPassword = ConvertTo-SecureString $password -AsPlainText -Force
$credentialps = New-Object System.Management.Automation.PSCredential ($username, $secPassword)
Start-Process -FilePath "<path to exe>\Test.exe" -Credential $credentialps -NoNewWindow -ArgumentList "<Arguments>"
This outputs the following error:
Start-Process : This command cannot be run due to the error: The parameter is incorrect.
I Also tried just using $credential = Get-Credential, this gives you back an PSCredentials Object, but it gave me the same error.
What am I doing wrong? Sorry if something's missing, Iam new to Powershell :)
Edit: After removing the Credentials parameter the script runs perfectly, so there shouldnt be a problem regarding the FilePath or Argumentlist.
We have multiple powershell script where we set credentials, this was working since last 2 years without any issue and suddenly below code start throwing an error. It is performing operations but still throwing error. Not able to figure out what causing the error. Please help if anyone has seen this before.
$UserName='<>'
$Password='<>'
# ************* SET CREDENTIALS ******************************************
$Password = ConvertTo-SecureString $password -AsPlainText -Force
$global:Cred = New-Object System.Management.Automation.PSCredential($username,$Password)
Set-CdmCredential -Domain (Get-WmiObject Win32_ComputerSystem).Domain -Credential $Cred
Good evening,
I'm trying to write a Powershell script that will connect to a remote server via SCP and upload or download files/folders. Ultimately this is the script that I would like Jenkins to run.
So far I'm using Posh-SSH and having good success. The only issue is, no matter what I have tried so far, it will always prompt me for my credentials. This, obviously, makes it not entirely automatic.
I have attached a few things I've tried. Hopefully someone can help me out with this!
The basic command I'm testing with:
get-scpfolder -computername '111.111.111.111' -credential $credential
-remotefile "/var/myFolder" -localfile 'C:\Users\Me\destFolder'
Again, this works, but it requires me to enter my credentials.
I saw this command online:
$Password = "pass"
$User = "admin"
$ComputerName = "111.111.111.111"
$Command = "get-scpfolder -computername $ComputerName -credential $Credentials -localfolder 'C:\Users\Me' -remotefolder '/var/destFolder"
$secpasswd = ConvertTo-SecureString $Password -AsPlainText -Force
$Credentials = New-Object System.Management.Automation.PSCredential($User, $secpasswd)
$SessionID = New-SSHSession -ComputerName $ComputerName -Credential $Credentials #Connect Over SSH
Invoke-SSHCommand -Index $sessionid.sessionid -Command $Command # Invoke Command Over SSH
However this returns ExitStatus 1 and nothing happens. I have tried a few variations of the $Command including the credentials or not, for example, and I can't get any of it to work.
I am writing a PS script to open a URL automatically in a Chrome browser. I created a credential object and pass it to Start-Process as below.
$username = Read-Host 'What is your username?'
$password = Read-Host 'What is your password?' -AsSecureString
$credentials = New-Object System.Management.Automation.PSCredential -ArgumentList #($username,(ConvertTo-SecureString -String $password -AsPlainText -Force))
Start-Process -FilePath Chrome -ArgumentList $url -Credential $credentials
I expect the Chrome browser to be opened with the URL using the credential object. But it's throwing the error as below.
Start-Process : This command cannot be executed due to the error: Logon failure: unknown user name or bad password.
Note: The URL works fine if I pass the Windows security credentials to the URL manually, therefore my credentials are good. Feel something is wrong in passing the Windows security credentials. Not sure what's wrong.
$userName = "Pandiyan"
$secpasswd = ConvertTo-SecureString "mypasswordiscool" -AsPlainText -Force
$mycreds = New-Object System.Management.Automation.PSCredential -ArgumentList $username, $secpasswd
$url = "localhost/atomicscope"
Start-Process -FilePath "C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" -ArgumentList $url -Credential $mycreds
You should also specify the path to chrome and try this again. Instead of readhost provide the credentials directly and it should fire chrome right away. If there is a user waiting to be typing in the console its fine. Else there's no use of automating this with powershell
You already read the password as a secure string, so you don't need to do that again when creating the credential object. ConvertTo-SecureString would only be required if $password contained a plaintext password.
This will do what you want:
$credentials = New-Object Management.Automation.PSCredential $username, $password
I'm trying to create a powershell script to allow my kids to reboot my Raspberry Pi from their Windows computer if need be. I've tested everything and have gotten it to work, but the only hitch is that it's prompting for a username and password. I realize the line that's doing it is:
New-SSHSession -ComputerName "myPi" -Credential (Get-Credential)
I've done some searching, but I can't seem to figure out if it's possible to replace the "(Get-Credential)" section to automatically enter the username/password.
And yes, I'm aware of the security risks. They could do much more damage to the Windows machine than they could ever do on the Pi, and the settings on the Pi are very easily restored, so no worries from my end.
Something like this should work:
$user = "someuser"
$pass = ConvertTo-SecureString -String "somepassword" -AsPlainText -Force
$creds = new-object -typename System.Management.Automation.PSCredential -argumentlist $user,$pass
New-SSHSession -ComputerName "myPi" -Credential $creds
You could also call a file that has the password encrypted in it. Note this can only be decrypted by the account it was generated on on the computer it was generated on.
$pass = "Password"
$Username = "Username"
$outfile = "c:\filelocation.xml"
$secureStringPwd = $pass | ConvertTo-SecureString -AsPlainText -Force
$credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList ($Username,$secureStringPwd)
$credential | Export-CliXml -Path $OutFile
Addressing Bill.
Correct, hard coding the password in the script is bad practice. Below is how I would change the first portion.
The above came from a custom script that's purpose was to create many cred accounts off a input json is why I wrote it that way.
$outfile = "c:\filelocation.xml"
Get-Credential | export-clixml -path $OutFile
You then can call the file in your script like so but this has to be done on the same user and computer that the creds file was generated on.
$Creds = Import-Clixml -Path "c:\file.xml"
New-SSHSession -ComputerName "myPi" -Credential $creds
Good point Edited -argumentlist.
Another option could be to do a 1 time setup with get-credential then convert the password to plaintext using convertfrom-securestring and then in the file you can take your password plaintext secure string and so something similar to the other answers:
$user = "someuser"
$pass = "YOUR LONG PASSWORD GUID FROM ABOVE" | convertTO-securestring
$creds = new-object -typename System.Management.Automation.PSCredential -argumentlist $user,$pass
New-SSHSession -ComputerName "myPi" -Credential $creds
This lets you do a one time setup, but avoids having multiple files or having your password appear in a readable way in the script.
If you go this way you need to do the setup FROM the account that will run the script ON the machine that will run the script, because it uses those for the encryption as far as I know.