I am reading data from a text file and sort it with matlab. It works well with below script:
load 'con.txt';
A = con;
X = sortrows(A,3);
But I've got many similar text files to sort with different names. E.g. con.txt, bon.txt, ton.txt, etc...
As such, I have to replace the name of file (i.e. load 'filename') to load, and replace matrix (i.e. A='filename') each time when i run the script.
Is there any easier way so that I don't need to replace two lines and A will auto equal to .txt file name?
Thanks.
Maybe something like this:
fname = input('enter filename:', 's');
A = load(fname);
...
Related
My matlab function is in a folder that contains the main project and the other functions of the code. However, the data is stored in a folder withing the main one named "data" and inside the specific dataset that i want, for example "ded4" in this example. I can't figure out how to open the text file that I want without changing the file to the main folder. The code I have so far is:
function[Classify] = Classify(logDir)
%%%%logDir='ded014a04';
Directory = ['data/' logDir '/']
Filename = [logDir '-fixationsOffSet']
File_name = fullfile(Directory,Filename)
File = fopen(File_name,'r')
end
The code is in the 'dev' folder, I think my path is correct because when I do
open(File_name)
it opens.
Thanks for the help
If you want to open the file in the editor, use
open(File_name)
If you want to read data from the file, you can use
dlmread(File_name) % Read ASCII delimited file.
or
C = textscan(File,'FORMAT') % Read formatted data from text file or string.
or more low-level using fscanf, e.g., if the file contains three columns of integers you do the following: Read the values in column order, and transpose to match the appearance of the file: (from the help of fprintf)
fid = fopen('count.dat');
A = fscanf(fid,'%d',[3,inf])';
fclose(fid);
I have multiple arrays with string data. All of them should be exported into a .csv file. The file should be saved in a subfolder. The file name is variable.
I used the code as follows:
fpath = ('./Subfolder/');
m_date = inputdlg('Date of measurement [yyyymmdd_exp]');
m_name = inputdlg('Characteristic name of the expteriment');
fformat = ('.csv');
fullstring = strcat(fpath, m_date,'_', m_name, fformat);
dlmwrite(fullstring,measurement);
However, I get an error that FILE must be a filename string or numeric FID
What's the reason?
Best
Andreas
What you are asking to do is fairly straightforward for Matlab or Octave. The first part is creating a file with a filename that changes. the best way to do this is by concatenating the strings to build the one you want.
You can use: fullstring = strcat('string1','string2')
Or specifically: filenameandpath = strcat('./Subfolder/FixedFileName_',fname)
note that because strings are pretty much just character arrays, you can also just use:
fullstring = ['string1','string2']
now, if you want to create CSV data, you'll first have to read in the file, possibly parse the data in some way, then save it. As Andy mentioned above you may just be able to use dlmwrite to create the output file. We'll need to see a sample of the string data to have an idea whether any more work would need to be done before dlmwrite could handle it.
I'm writting a Matlab code that generates an array number and it should replace that each number in a text file (that already exists) and replace all instances with that. The number should be in string format. I've achieved this:
ita='"';
for i=1:size(z,2)
word_to_replace=input('Replace? ','s');
tik=input('Replacement? ','s');
coluna=input('Column? ');
files = dir('*.txt');
for i = 1:numel(files)
if ~files(i).isdir % make sure it is not a directory
contents = fileread(files(i).name);
fh = fopen(files(i).name,'w');
val=num2str(z(i,coluna));
word_replacement=strcat(tik,val,ita);
contents = regexprep(contents,'word_to_replace','word_replacement');
fprintf(fh,contents); % write "replaced" string to file
fclose(fh) % close out file
end
end
end
I want the code to open the file#1 ('file.txt'), find and replace all instances 'word_replacement' with 'word_to_replace' and save to the same file. The number of txt files is undefined, it could be 100 or 10000.
Many thanks in advance.
The problem with your code is the following statement:
contents = regexprep(contents,'word_to_replace','word_replacement');
You are using regular expressions to find any instances of word_to_replace in your text files and changing them to word_replacement. Looking at your code, it seems that these are both variables that contain strings. I'm assuming that you want the contents of the variables instead of the actual name of the variables.
As such, simply remove the quotations around the second and third parameters of regexprep and this should work.
In other words, do this:
contents = regexprep(contents, word_to_replace, word_replacement);
I have several data log files (here: 34) for those I have to calculate some certain values. I wrote a seperate function to publish the results of the calculation in a pdf file. But I only can publish one file after another, so it takes a while to publish all 34 files.
Now I want to automize that with a loop - importing the data, calculate the values and publish the results for every log file in a new pdf file. I want 34 pdf files for every log file at the end.
My problem is, that I couldn't find a way to rename the pdf files during publishing. The pdf file is always named after the script which is calculating the values. Obviously the pdf is overwritten within a loop. So at the end everything is calculated, but I only have the pdf from the last calculated log file.
There was this hacky solution to change the Matlab publish script, but since I don't have admin rights I can't use that:
"This is really hacky, but I would modify publish to accept a new option prefix. Replace line 93
[scriptDir,prefix] = fileparts(fullPathToScript);
with
if ~isfield(options, 'prefix')
[scriptDir,prefix] = fileparts(fullPathToScript);
else
[scriptDir,~] = fileparts(fullPathToScript);
prefix = options.prefix; end
Now you can set options.prefix to whatever filename you want. If you want to be really hardcore, make the appropriate modifications to supplyDefaultOptions and checkOptionFields as well."
Any suggestions?
Thanks in advance,
Martin
Here's one idea using movefile to rename the resultant published PDF on each iteration:
for i = 1:34
file = publish(files(i)); % Replace with your own command(s)
[pathStr,fileName,ext] = fileparts(file);
newFile = [pathStr filesep() fileName '_' int2str(i) ext]; % Example: append _# to each
[success,msg,msgid] = movefile(file,newFile);
if ~success
error(msgid,msg);
end
end
Also used are fileparts and filesep. See this question for other ways to rename and move files.
I need to save multiple arrays to a text file with the filename the same as the variable name. I have created a vector of all the variables required using the follow lines.
all_var={};
vars=whos;
for(i=1:size(vars,1))
if(~isempty(regexp(vars(i).name,'A[0-9]','match')))
all_var{end+1}=vars(i).name;
end
end
I am now struggling to find a way to save all of these variable to file. Any help would be appreciated.
Thank you
I'm not sure if I understood correctly. Do you want to save each variable in different files? Assuming you want to save all variables in the same file with, lets say, the first value of the vector as the filename, you could try something like:
filename = sprintf('vector_starting_with%d.mat', vars(1).name);
save(filename)
In case you want separated files for each element in the vector, you could try:
all_var={};
vars=whos;
for(i=1:size(vars,1))
if(~isempty(regexp(vars(i).name,'A[0-9]','match')))
all_var{end+1}=vars(i).name;
varsave=sprintf('vector_%d.mat', vars(i).name)
save(varsave);
end
end
Sorry that it might have some bugs, right now I don't have MATLAB. Nevertheless, try to go over this documentation.
Edit Let me know if you try this then:
all_var={};
vars=whos;
for(i=1:size(vars,1))
if(~isempty(regexp(vars(i).name,'A[0-9]','match')))
all_var{end+1}=vars(i).name;
filename = sprintf('%d.txt', vars(i).name);
file = fopen(filename,'w');
fprintf(file,vars(i).name);
fclose(file);
end
end