I am trying to implement something like the etcd services that uses the consensus algorithm (https://raft.github.io/). In this case, multiple instances of the etcd services need to be aware of each other. For this to happen, if we have 3 pods of etcd instance in a replication controller, the pods need to be able to talk to each other (at least be able to know the IP of self and all the other pods).
Is there a way of achieving this in the replication controller or pod specs without having to use the kubernetes API in the pod container?
You can put a service in front of those pods by giving each pod some label (for example etcd-service=true), and making a kubernetes service with a selector that matches that label. Use the DNS add-on, and you will get a DNS A record for each endpoint in the service. You can read more in the docs here.
Related
I'm a beginner in Kubernetes and I have a situation as following: I have two differents Pods: PodA and PodB. Firstly, I want to expose PodA to the outside world, so I create a Service (type NodePort or LoadBalancer) for PodA, which is not difficult to understand for me.
Then I want PodA communicate to PodB, and after several hours googling, I found the answer is that I also need to create a Service (type ClusterIP if I want to keep PodB only visible inside the cluster) for PodB, and if I do so, I can let PodA and PodB comminucate to each other. But the problem is I also found this article. According to this webpage, they say that the communication between pods on the same node can be done via cbr0, a Network Bridge, or the communication between pods on different nodes can be done via a route table of the cluster, and they don't mention anything to the Service object (which means we don't need Service object ???).
In fact, I also read the documents of K8s and I found in the Cluster Networking
Cluster Networking
...
2. Pod-to-Pod communications: this is the primary focus of this document.
...
where they also focus on to the Pod-to-Pod communications, but there is no stuff relevant to the Service object.
So, I'm really confusing right now and my question is: Could you please explain to me the connection between these stuff in the article and the Service object? The Service object is a high-level abstract of the cbr0 and route table? And in the end, how can the Pods can communicate to each other?
If I misunderstand something, please, point it out for me, I really appreciate that.
Thank you guys !!!
Motivation behind using a service in a Kubernetes cluster.
Kubernetes Pods are mortal. They are born and when they die, they are not resurrected. If you use a Deployment to run your app, it can create and destroy Pods dynamically.
Each Pod gets its own IP address, however in a Deployment, the set of Pods running in one moment in time could be different from the set of Pods running that application a moment later.
This leads to a problem: if some set of Pods (call them “backends”) provides functionality to other Pods (call them “frontends”) inside your cluster, how do the frontends find out and keep track of which IP address to connect to, so that the frontend can use the backend part of the workload?
That being said, a service is handy when your deployments (podA and podB) are dynamically managed.
Your PodA can always communicate with PodB if it knows the address or the DNS name of PodB. In a cluster environment, there may be multiple replicas of PodB, or an instance of PodB may die and be replaced by another instance with a different address and different name. A Service is an abstraction to deal with this situation. If you use a Service to expose your PodB, then all pods in the cluster can talk to an instance of PodB using that service, which has a fixed name and fixed address no matter how many instances of PodB exists and what their addresses are.
First, I read it as you are dealing with two applications, e.g. ApplicationA and ApplicationB. Don't use the Pod abstraction when you reason about your architecture. On Kubernetes, you are dealing with a distributed system, and it is designed so that you should have multiple instances of your Application, e.g. for High Availability. Each instance of your application is a Pod.
Deploy your applications ApplicationA and ApplicationB as a Deployment resource. Then it is easy do do rolling upgrades without downtime, and Kubernetes will restart any instance of your application if it crash.
For every Deployment or for you, application, create one Service resource, (e.g. ServiceA and ServiceB). When you communicate from ApplicationA to another application, use the Service, e.g. ServiceB. The service will load balance your requests to the instances of the other application, and you can upgrade your Deployment without downtime.
1.Cluster networking : As the name suggests, all the pods deployed in the cluster will be connected by implementing any kubernetes network model like DANM, flannel
Check this link to see how to create a cluster network.
Creating cluster network
With the CNI installed (by implementing cluster network), every pod will get an IP.
2.Service objects created with type ClusterIP, points to the this IPs (via endpoint) created internally to communicate.
Answering your question, Yes, The Service object is a high-level abstract of the cbr0 and route table.
You can use service object to communicate between pods.
You can also implement service mesh like envoy / Istio if the network is complex.
I did read up on StatefulSets which I want to use for some stateful applications, and was wondering about two things?
1) Do I need to put a service in front? Or do I just dns query the single instances, and they do have a static ip like with a service by default, disregarding what pod runs behind?
2) How does a statefulset behave when a given pod X is down? I suppose with my theory of it having a kind of "internal" service, it will just hold back any requests done while the pod behind the IP is down until a new one is there?
1) Do I need to put a service in front? Or do I just dns query the
single instances, and they do have a static ip like with a service by
default, disregarding what pod runs behind?
StatefulSets currently require a Headless Service to be responsible for the network identity of the Pods. You are responsible for creating this Service.
2) How does a statefulset behave when a given pod X is down? I suppose
with my theory of it having a kind of "internal" service, it will just
hold back any requests done while the pod behind the IP is down until
a new one is there?
StatefulSet ensures that, at any time, there is at most one Pod with a given identity running in a cluster. This is referred to as at most one semantics provided by a StatefulSet.The StatefulSet also recreates Pods if they’re deleted, similar to what a ReplicaSet does for stateless Pods.
After reading thru Kubernetes documents like this, deployment , service and this I still do not have a clear idea what the purpose of service is.
It seems that the service is used for 2 purposes:
expose the deployment to the outside world (e.g using LoadBalancer),
expose one deployment to another deployment (e.g. using ClusterIP services).
Is this the case? And what about the Ingress?
------ update ------
Connect a Front End to a Back End Using a Service is a good example of the service working with the deployment.
Service
A deployment consists of one or more pods and replicas of pods. Let's say, we have 3 replicas of pods running in a deployment. Now let's assume there is no service. How does other pods in the cluster access these pods? Through IP addresses of these pods. What happens if we say one of the pods goes down. Kunernetes bring up another pod. Now the IP address list of these pods changes and all the other pods need to keep track of the same. The same is the case when there is auto scaling enabled. The number of the pods increases or decreases based on demand. To avoid this problem services come into play. Thus services are basically programs that manages the list of the pods ip for a deployment.
And yes, also regarding the uses that you posted in the question.
Ingress
Ingress is something that is used for providing a single point of entry for the various services in your cluster. Let's take a simple scenario. In your cluster there are two services. One for the web app and another for documentation service. If you are using services alone and not ingress, you need to maintain two load balancers. This might cost more as well. To avoid this, ingress when defined, sits on top of services and routes to services based on the rules and path defined in the ingress.
I am new to the Kubernetes, and I'm trying to understand that how can I apply it for my use-case scenario.
I managed to install a 3-node cluster on VMs within the same network. Searching about K8S's concepts and reading related articles, still I couldn't find answer for my below question. Please let me know if you have knowledge on this:
I've noticed that internal DNS service of K8S applies on the pods and this way services can find each other with hostnames instead of IPs.
Is this applicable for communication between pods of different nodes or this is only within the services inside a single node? (In other words, do we have a dns service on the node level in the K8S, or its only about pods?)
The reason for this question is the scenario that I have in mind:
I need to deploy a micro-service application (written in Java) with K8S. I made docker images from each service in my application and its working locally. Currently, these services are connected via pre-defined IP addresses.
Is there a way to run each of these services within a separate K8S node and use from its DNS service to connect the nodes without pre-defining IPs?
A service serves as an internal endpoint and (depending on the configuration) load balancer to one or several pods behind it. All communication typically is done between services, not between pods. Pods run on nodes, services don't really run anything, they are just routing traffic to the appropriate pods.
A service is a cluster-wide configuration that does not depend on a node, thus you can use a service name in the whole cluster, completely independent from where a pod is located.
So yes, your use case of running pods on different nodes and communicate between service names is a typical setup.
I am learning Kubernetes and currently deep diving into high availability and while I understand that I can set up a highly available control plane (API-server, controllers, scheduler) with local (or with remote) etcds as well as a highly available set of minions (through Kubernetes itself), I am still not sure where in this concept services are located.
If they live in the control plane: Good I can set them up to be highly available.
If they live on a certain node: Ok, but what happens if the node goes down or becomes unavailable in any other way?
As I understand it, services are needed to expose my pods to the internet as well as for loadbalancing. So no HA service, I risk that my application won't be reachable (even though it might be super highly available for any other aspect of the system).
Kubernetes Service is another REST Object in the k8s Cluster. There are following types are services. Each one of them serves a different purpose in the cluster.
ClusterIP
NodePort
LoadBalancer
Headless
fundamental Purpose of Services
Providing a single point of gateway to the pods
Load balancing the pods
Inter Pods communication
Provide Stability as pods can die and restart with different Ip
more
These Objects are stored in etcd as it is the single source of truth in the cluster.
Kube-proxy is the responsible for creating these objects. It uses selectors and labels.
For instance, each pod object has labels therefore service object has selectors to match these labels. Furthermore, Each Pod has endpoints, so basically kube-proxy assign these endpoints (IP:Port) with service (IP:Port).Kube-proxy use IP-Tables rules to do this magic.
Kube-Proxy is deployed as DaemonSet in each cluster nodes so they are aware of each other by using etcd.
You can think of a service as an internal (and in some cases external) loadbalancer. The definition is stored in Kubernetes API server, yet the fact thayt it exists there means nothing if something does not implement it. Most common component that works with services is kube-proxy that implements services on nodes using iptables (meaning that every node has every service implemented in it's local iptables rules), but there are also ie. Ingress Controller implementations that use Service concept from API to find endpoints and direct traffic to them, effectively skipping iptables implementation. Finaly there are service mesh solutions like linkerd or istio that can leverage Service definitions on their own.
Services loadbalance between pods in most of implementations, meaning that as long as you have one backing pod alive (and with enough capacity) your "service" will respond (so you get HA as well, specially if you implement readiness/liveness probes that among other things will remove unhealthy pods from services)
Kubernetes Service documentation provides pretty good insight on that