I have installed editorconfig mode in Ubuntu 14.04, Emacs 24 (manually, as advised on github), and it works nicely locally (I also have catch-all .editorconfig in the $HOME dir.)
However, when editing via ssh/tramp on another Ubuntu 14.04 host (tried without and with editorconfig package for EditConfig C Core installed there), .editorconfig-files seem to be totally ignored, not even my home dir one taken into account.
Is it just a sad limitation or am I missing some configuration?
Unfortunately, this is a limitation. One thing you can do is to use sshfs to mount a remote file system locally and edit the file via that way.
Related
I'm using wsl and it runs codes in vscode pretty fine and I have different libraries which I installed through pip and conda in wsl but when I run that code using vscode itself it doesn't recognize the libraries or even pip itself.
I don't have any other environment.
I should add that I installed the packages globally using conda install ... or pip install ... in base environment and I only have base environment and I run my code through code . and I also have python and remote wsl extensions installed in my vscode.
what can be the problem?
I don't have much personal experience with this, but I found some useful information in this Stack Overflow question (even though it doesn't utilize conda), along with https://code.visualstudio.com/docs/remote/wsl-tutorial#_python-development.
I also found this blog post useful, even if it doesn't cover WSL.
In short, make sure you:
Have installed the Python extension (by Microsoft) in VSCode. This is critical for being able to detect and select the Python interpreter. You don't mention having this in place, so I believe this is your likely problem.
You have done this already, but including it for others who might read this later -- Install the Remote - WSL extension (or the Remote Development extension pack) in VSCode.
You are also doing this already -- Start VSCode from inside your WSL distribution. Alternatively, you can start VSCode from Windows and then select the Remote WSL - Reopen Folder in WSL from the Command Palette (also accessible from the "Remote" Status Bar).
In VSCode, open the Command Palette with Shift+Ctrl+P, search for the Python: Select Interpreter command, and you should find your Conda environment in the list.
After selecting this, you should find that your project is using the interpreter and modules that you have installed via conda.
One thing I did to overcome this issue is go to Extensions -> Local (You should have two tabs there, Local and WSL:DISTRO) DISTRO refers to whatever DISTRO you're using, you will see that some of the local extensions are disabled in the current workspace (WSL) and there is a little cloud icon in the WSL:DISTRO tab that says install Local Extensions in WSL:DISTRO once you click that it will let you choose which extensions to install and you should be good to go!
I'm a noob at setting up LaTeX and I'm completely stuck. I had a broken MikTex + TexStudio setup that the previous owner of my work computer left behind (I also mention that I recently upgraded from Windows 10 to Windows 11). Unable to fix it, I decided to just wipe out everything and start clean. I uninstalled TexStudio and MikTex (also deleted all the files in AppData, etc.) and I installed TexLive (and gave the PC a restart as prescribed) to use it in VS Code (which I already had). All the guides I found say that once I install the LaTex Workshop extension in VS Code, everything should work on it's own (or at least no one mentions that there are problems that could arise).
However, when I try to compile a tex file I get the following error:
11 [0x00002528] INFO latexmk null - this process (19956) started by 'Code' with command line: latexmk -synctex=1 -interaction=nonstopmode -file-line-error -pdf "-outdir=c:/Users/.../texfile_locationfolder" "c:/Users/.../texfile"
It seems that this is a fresh TeX installation.
Please finish the setup before proceeding.
For more information, visit:
https://miktex.org/howto/install-miktex-win
The fact that it mentions MikTex makes me think something messed up and VS Code is trying to use MikTex instead of TexLive. How can I fix this?
PS: I've tried to look at the settings for the VS Code extension, but there are dozens of settings options and, fairly enough, I don't have any idea what most of them do.
I found a fix: I went into the Environment Variables list and found that MikTex was still in there. After deleting everything related to MikTex in the PATH Environment Variables, all was working well. Yeey!
I had the same issue (on Windows). Resolved by deleting a MikTex folder, found by searching for MikTex in File Explorer.
Then, I deleted this folder from the recycling bin and restarted my computer. LaTeX Workshop detected TeXLive and works as expected.
Recently I pass to Emacs org because is really convenient to me to write note there.
So I installed all packages I needed (principally ORG and EVIL) but I didn't understand how to setup everything.
I installed emacs from brew without using cask, I linked it, and I'm sure that I'm using the version that I installed (26.1).
So in my ~/ folder I have a .emacs file in which I set up evil mode, and I have a /.emacs.d/ in which I have a lot of file. The problem is: whatever I wrote in a ~/.emacs.d/init.el seems doesn't effect emacs.
So I said "whatever, I'm going on github and I installed some complete configurations and then I customized them myself". I tried to install these two configurations.
https://github.com/hrs/dotfiles
https://github.com/larstvei/dot-emacs?files=1
But for some reason, after doing exactly what they say on README.org
nothing happens.
In particular the second link, after install and open emacs said I need to have ~/.cask/.cask.el but I don't have it.
Advice?
I used to be a comfortable emacs user and for close to 10 years I completely got away from using emacs (I know its a shame) but I have a wage memory of setting something in .emacs to open remote files in a server via local emacs.
Just to make the scenario clear:
Login to a remote server (ssh) -> emacs somefileInRemoreServer.file &
File get open using the local version of emacs.
My questions are:
Is this possible?
how can I accomplish this?
I have both mac and ubuntu on mac I use Aquamacs. It would be a great help if I can get instructions on both versions.
I'm not sure whether you want to ssh prior to using emacs or ssh using (in) emacs.
If you want to let emacs do all the work check out the links added by phils, TRAMP mode is the way to go for remote editing IN emacs.
If you want to use ssh to mount a remote filesystem (resulting in "local" editing with emacs) you should check out sshfs (man, wiki).
I think it comes with pretty much any of the current distros (or can be installed easily otherwise). It is a fuse extension which allows to mount a remote directory to a local one without any further requirements on the remote side than ssh.
I do like TRAMP for editing one or two files but using sshfs is great for working on a whole project directory which is placed remotely and which you do not want to sync using another method.
OK< I know I can use Eclipse for Java programming and such but I work using WAMP for editing PHP, XHTML, JavaScript files... what IDE is best to edit the files and use GitHub? Because I don't know want to go to localhost and then copy my files to my local GitHub repo...
Cloud9 IDE might be what you are looking for! It's an online IDE with out-of-the-box intergration with GitHub, heroku etc. and gives you the ability to share workspaces as well.
Eclipse has the egit plugin that is really nice. You can use aptana which is based around eclipse but includes all the web views. It can basically edit everything you mentioned and really well, while providing a nice wrapper for your git repos
http://aptana.org/products/studio3
http://eclipse.org/egit/
well is not an IDE but vim with some git plugins is the best for me.
Eclipse should have some git plugins also, I think.
The best way to learn git is yo use it from command line!
Emacs + tramp + the command line ?
Update: magit is reported to support tramp
Update:
My experience: I have a distant linux server running a rails app. and private git repositories / apache (using several VirtualHosts with or without ssl). That server runs a ssh server. I use bare ssh session for command line usage (git, nominal admin.) and emacs + tramp to remotely edit the files presents on that server. I you are not rebuked by anti-eye candies tools (as for not-at-all drag'n'drop stuff), I would suggest you to give emacs a try (see EmacsW32 and nXhtml if you are under Windows). I assume you can install a ssh server on your WAMP machine… If this is the case, you could open your file from emacs just by using the following syntax (assuming you would edit the /home/renaud/.bashrc on the distant server):
/ssh:user#obf.uscatedmachine.org:/home/user/.bashrc
With putty on windows: see that and this posts.
It works the same for directories. You shall be prompted for your password once, and then edit the file/directory as if it is just on your machine. For the git part, I have verified myself since I do the git stuff directly from a ssh terminal, but latest magit
is reported to support tramp (i.e. remote git plumbering from my understanding).
If you have never used emacs before, it will not be easy. You will have to learn emacs basics first and customize it to fit you needs. My opinion is that's worth to give it a try. I could help you with basic configuration if needed.
(I use myself emacs almost for everything on my linux box from simple text editing to Java programming.)
Update:
After some testing, magit works very well remotely (tested on linux)! A new mode added to my configuration thanks to your question!